linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: [PATCH 5/6] regulator: max77686: Remove support for board files
Date: Tue, 04 Nov 2014 09:49:45 +0100	[thread overview]
Message-ID: <1415090986-30623-6-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1415090986-30623-1-git-send-email-k.kozlowski@samsung.com>

The driver is used only on Exynos based boards with DTS support.
Simplify the driver and remove dead (unused) entries in platform_data
structure.

Convert the driver to DTS-only version. Parse all regulators at once,
not one-by-one. Remove dependency on data provided by max77686 MFD
driver. Use new DT style parsing method for regulators init data.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/regulator/max77686.c | 91 +++++++++-----------------------------------
 1 file changed, 19 insertions(+), 72 deletions(-)

diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 28f4eab82a09..871b96bcd2d0 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -281,6 +281,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 
 #define regulator_desc_ldo(num)		{				\
 	.name		= "LDO"#num,					\
+	.of_match	= of_match_ptr("LDO"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_LDO##num,				\
 	.ops		= &max77686_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -297,6 +299,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 #define regulator_desc_lpm_ldo(num)	{				\
 	.name		= "LDO"#num,					\
+	.of_match	= of_match_ptr("LDO"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_LDO##num,				\
 	.ops		= &max77686_ldo_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -313,6 +317,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 #define regulator_desc_ldo_low(num)		{			\
 	.name		= "LDO"#num,					\
+	.of_match	= of_match_ptr("LDO"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_LDO##num,				\
 	.ops		= &max77686_ldo_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -329,6 +335,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 #define regulator_desc_ldo1_low(num)		{			\
 	.name		= "LDO"#num,					\
+	.of_match	= of_match_ptr("LDO"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_LDO##num,				\
 	.ops		= &max77686_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -345,6 +353,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 #define regulator_desc_buck(num)		{			\
 	.name		= "BUCK"#num,					\
+	.of_match	= of_match_ptr("BUCK"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_BUCK##num,				\
 	.ops		= &max77686_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -360,6 +370,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 #define regulator_desc_buck1(num)		{			\
 	.name		= "BUCK"#num,					\
+	.of_match	= of_match_ptr("BUCK"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_BUCK##num,				\
 	.ops		= &max77686_buck1_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -375,6 +387,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 #define regulator_desc_buck_dvs(num)		{			\
 	.name		= "BUCK"#num,					\
+	.of_match	= of_match_ptr("BUCK"#num),			\
+	.regulators_node	= of_match_ptr("voltage-regulators"),	\
 	.id		= MAX77686_BUCK##num,				\
 	.ops		= &max77686_buck_dvs_ops,			\
 	.type		= REGULATOR_VOLTAGE,				\
@@ -428,86 +442,21 @@ static const struct regulator_desc regulators[] = {
 	regulator_desc_buck(9),
 };
 
-#ifdef CONFIG_OF
-static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev,
-					struct max77686_platform_data *pdata)
-{
-	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct device_node *pmic_np, *regulators_np;
-	struct max77686_regulator_data *rdata;
-	struct of_regulator_match rmatch;
-	unsigned int i;
-
-	pmic_np = iodev->dev->of_node;
-	regulators_np = of_get_child_by_name(pmic_np, "voltage-regulators");
-	if (!regulators_np) {
-		dev_err(&pdev->dev, "could not find regulators sub-node\n");
-		return -EINVAL;
-	}
-
-	pdata->num_regulators = ARRAY_SIZE(regulators);
-	rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
-			     pdata->num_regulators, GFP_KERNEL);
-	if (!rdata) {
-		of_node_put(regulators_np);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < pdata->num_regulators; i++) {
-		rmatch.name = regulators[i].name;
-		rmatch.init_data = NULL;
-		rmatch.of_node = NULL;
-		of_regulator_match(&pdev->dev, regulators_np, &rmatch, 1);
-		rdata[i].initdata = rmatch.init_data;
-		rdata[i].of_node = rmatch.of_node;
-	}
-
-	pdata->regulators = rdata;
-	of_node_put(regulators_np);
-
-	return 0;
-}
-#else
-static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev,
-					struct max77686_platform_data *pdata)
-{
-	return 0;
-}
-#endif /* CONFIG_OF */
-
 static int max77686_pmic_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
 	struct max77686_data *max77686;
-	int i, ret = 0;
+	int i;
 	struct regulator_config config = { };
 
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data found for regulator\n");
-		return -ENODEV;
-	}
-
-	if (iodev->dev->of_node) {
-		ret = max77686_pmic_dt_parse_pdata(pdev, pdata);
-		if (ret)
-			return ret;
-	}
-
-	if (pdata->num_regulators != MAX77686_REGULATORS) {
-		dev_err(&pdev->dev,
-			"Invalid initial data for regulator's initialiation\n");
-		return -EINVAL;
-	}
-
 	max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
 				GFP_KERNEL);
 	if (!max77686)
 		return -ENOMEM;
 
-	config.dev = &pdev->dev;
+	config.dev = iodev->dev;
 	config.regmap = iodev->regmap;
 	config.driver_data = max77686;
 	platform_set_drvdata(pdev, max77686);
@@ -516,16 +465,14 @@ static int max77686_pmic_probe(struct platform_device *pdev)
 		struct regulator_dev *rdev;
 		int id = regulators[i].id;
 
-		config.init_data = pdata->regulators[i].initdata;
-		config.of_node = pdata->regulators[i].of_node;
-
 		max77686->opmode[id] = MAX77686_NORMAL;
 		rdev = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
 		if (IS_ERR(rdev)) {
+			int ret = PTR_ERR(rdev);
 			dev_err(&pdev->dev,
-				"regulator init failed for %d\n", i);
-			return PTR_ERR(rdev);
+				"regulator init failed for %d: %d\n", i, ret);
+			return ret;
 		}
 	}
 
-- 
1.9.1


  parent reply	other threads:[~2014-11-04  8:50 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-04  8:49 [PATCH 0/6] regulator: max77686/802: Cleanup Krzysztof Kozlowski
2014-11-04  8:49 ` [PATCH 1/6] regulator: max77686: Consistently index opmode array by rdev id Krzysztof Kozlowski
2014-11-04 20:41   ` Mark Brown
2014-11-04  8:49 ` [PATCH 2/6] regulator: max77686: Initialize opmode explicitly to normal mode Krzysztof Kozlowski
2014-11-04 20:42   ` Mark Brown
2014-11-04  8:49 ` [RFT 3/6] regulator: max77802: Don't ignore return value of current opmode Krzysztof Kozlowski
2014-11-04 20:47   ` Mark Brown
2014-11-04  8:49 ` [RFT 4/6] regulator: max77802: Remove support for board files Krzysztof Kozlowski
2014-11-04  8:49 ` Krzysztof Kozlowski [this message]
2014-11-04 20:46   ` [PATCH 5/6] regulator: max77686: " Mark Brown
2014-11-05  8:33     ` Krzysztof Kozlowski
2014-11-04  8:49 ` [PATCH 6/6] mfd: max77686/802: " Krzysztof Kozlowski
2014-11-04  9:24 ` [PATCH 0/6] regulator: max77686/802: Cleanup Javier Martinez Canillas
2014-11-04  9:25 ` Krzysztof Kozlowski
2014-11-04 20:42   ` Mark Brown
2014-11-05  8:34     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415090986-30623-6-git-send-email-k.kozlowski@samsung.com \
    --to=k.kozlowski@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=broonie@kernel.org \
    --cc=javier.martinez@collabora.co.uk \
    --cc=kyungmin.park@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).