From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932728AbaKRU7M (ORCPT ); Tue, 18 Nov 2014 15:59:12 -0500 Received: from mail-wi0-f172.google.com ([209.85.212.172]:45460 "EHLO mail-wi0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932685AbaKRU7G (ORCPT ); Tue, 18 Nov 2014 15:59:06 -0500 From: Mariusz Gorski To: Greg Kroah-Hartman , Willy Tarreau Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/9] staging: panel: Remove magic numbers Date: Tue, 18 Nov 2014 21:56:08 +0100 Message-Id: <1416344174-9155-4-git-send-email-marius.gorski@gmail.com> X-Mailer: git-send-email 2.1.3 In-Reply-To: <1416344174-9155-1-git-send-email-marius.gorski@gmail.com> References: <1416344174-9155-1-git-send-email-marius.gorski@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Get rid of magic numbers indicating that the value of a module param is not set. Use a defined value instead. Signed-off-by: Mariusz Gorski --- drivers/staging/panel/panel.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 0d3f09e..1b4a211 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -133,6 +133,8 @@ #define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */ #define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */ +#define NOT_SET -1 + /* macros to simplify use of the parallel port */ #define r_ctr(x) (parport_read_control((x)->port)) #define r_dtr(x) (parport_read_data((x)->port)) @@ -439,37 +441,37 @@ MODULE_PARM_DESC(profile, "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; " "4=16x2 nexcom; default=40x2, old kp"); -static int keypad_type = -1; +static int keypad_type = NOT_SET; module_param(keypad_type, int, 0000); MODULE_PARM_DESC(keypad_type, "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys"); -static int lcd_type = -1; +static int lcd_type = NOT_SET; module_param(lcd_type, int, 0000); MODULE_PARM_DESC(lcd_type, "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in"); -static int lcd_height = -1; +static int lcd_height = NOT_SET; module_param(lcd_height, int, 0000); MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD"); -static int lcd_width = -1; +static int lcd_width = NOT_SET; module_param(lcd_width, int, 0000); MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD"); -static int lcd_bwidth = -1; /* internal buffer width (usually 40) */ +static int lcd_bwidth = NOT_SET; /* internal buffer width (usually 40) */ module_param(lcd_bwidth, int, 0000); MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)"); -static int lcd_hwidth = -1; /* hardware buffer width (usually 64) */ +static int lcd_hwidth = NOT_SET; /* hardware buffer width (usually 64) */ module_param(lcd_hwidth, int, 0000); MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)"); -static int lcd_charset = -1; +static int lcd_charset = NOT_SET; module_param(lcd_charset, int, 0000); MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074"); -static int lcd_proto = -1; +static int lcd_proto = NOT_SET; module_param(lcd_proto, int, 0000); MODULE_PARM_DESC(lcd_proto, "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface"); @@ -515,11 +517,11 @@ MODULE_PARM_DESC(lcd_bl_pin, /* Deprecated module parameters - consider not using them anymore */ -static int lcd_enabled = -1; +static int lcd_enabled = NOT_SET; module_param(lcd_enabled, int, 0000); MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead"); -static int keypad_enabled = -1; +static int keypad_enabled = NOT_SET; module_param(keypad_enabled, int, 0000); MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead"); -- 2.1.3