From: Chris Zhong <zyw@rock-chips.com>
To: heiko@sntech.de, dianders@chromium.org
Cc: mturquette@linaro.org,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Russell King <linux@arm.linux.org.uk>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
khilman@kernel.org, linux-rockchip@lists.infradead.org,
Chris Zhong <zyw@rock-chips.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Kumar Gala <galak@codeaurora.org>, Tony Xie <xxx@rock-chips.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 0/4] The 1st version of suspend for RK3288.
Date: Tue, 25 Nov 2014 15:32:19 +0800 [thread overview]
Message-ID: <1416900743-29204-1-git-send-email-zyw@rock-chips.com> (raw)
This suspend patch is only support cut off the power of cpu and some external
devices, since we still lack power_domain driver, so the other power rail
of rk3288 need keep power on.
I have tested it on rk3288-evb board, atop next-20141124. goto suspend by type
"echo mem > /sys/power/state", vdd_cpu is about 0mv by measuring, so it can be
determined in sleep mode, then press power button to wakeup it.
Changes in v9:
- fold Doug's patches
- modify some print log
- update the subject and description
Changes in v8:
- use enum for define sleep mode
- move rk3288_config_bootdata to the front of sram memcpy
- set vdd_gpu to 1.0v during suspend
- add regulator-on-in-suspend before set suspend voltage
Changes in v7:
- get rid all of unused code
- add regulator-state-mem sub node for suspend
Changes in v6:
- get rid of the save/restore of SRAM
- doing the copy of resume code once at init time
- remove ROCKCHIP_ARM_OFF_LOGIC_DEEP from rk3288_fill_in_bootram
- add of_platform_populate in rockchip_dt_init
- change pmu_intmem@ff720000 to sram@ff720000
- change pmu_intmem@ff720000 to sram@ff720000
Changes in v5:
- use rk3288_bootram_sz for memcpy size
- fixed error of sram save and restore
- change the size of sram in example
- change size to 4k
Changes in v4:
- remove grf regmap
Changes in v3:
- move the pinmux of gpio6_c6 save and restore to pinctrl-rockchip
Changes in v2:
- add the regulator calls in prepare and finish.
- add the pinmux of gpio6_c6 save and restore
- put "rockchip,rk3288-pmu-sram" to first
Chris Zhong (4):
ARM: rockchip: add suspend and resume for RK3288
ARM: rockchip: Add pmu-sram binding
ARM: dts: add RK3288 suspend support
ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808
.../devicetree/bindings/arm/rockchip/pmu-sram.txt | 16 ++
arch/arm/boot/dts/rk3288-evb-rk808.dts | 51 +++-
arch/arm/boot/dts/rk3288.dtsi | 11 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/pm.c | 260 +++++++++++++++++++++
arch/arm/mach-rockchip/pm.h | 99 ++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
arch/arm/mach-rockchip/sleep.S | 73 ++++++
8 files changed, 512 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
create mode 100644 arch/arm/mach-rockchip/pm.c
create mode 100644 arch/arm/mach-rockchip/pm.h
create mode 100644 arch/arm/mach-rockchip/sleep.S
--
1.9.1
next reply other threads:[~2014-11-25 7:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-25 7:32 Chris Zhong [this message]
2014-11-25 7:32 ` [PATCH v9 1/4] ARM: rockchip: add suspend and resume for RK3288 Chris Zhong
2014-11-25 7:32 ` [PATCH v9 2/4] ARM: rockchip: Add pmu-sram binding Chris Zhong
2014-11-25 7:32 ` [PATCH v9 3/4] ARM: dts: add RK3288 suspend support Chris Zhong
2014-12-01 5:26 ` Doug Anderson
2014-12-01 8:56 ` Chris Zhong
2014-11-25 7:32 ` [PATCH v9 4/4] ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808 Chris Zhong
2014-11-26 22:52 ` Doug Anderson
2014-11-27 0:56 ` Chris Zhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416900743-29204-1-git-send-email-zyw@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khilman@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=xxx@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).