[PATCH v8 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding

[Bjorn Andersson <bjorn.andersson@sonymobile.com>]

Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---

Removed regulator definition from this patch, as these needs more discussion to
be able to implement SoC assisted power save features of the Qualcomm
platforms. No other changes.

 Documentation/devicetree/bindings/mfd/qcom-rpm.txt |  70 ++++++++++
 include/dt-bindings/mfd/qcom-rpm.h                 | 154 +++++++++++++++++++++
 2 files changed, 224 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
 create mode 100644 include/dt-bindings/mfd/qcom-rpm.h

diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
new file mode 100644
index 0000000..85e3198
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -0,0 +1,70 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,rpm-apq8064"
+		    "qcom,rpm-msm8660"
+		    "qcom,rpm-msm8960"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address and size of the RPM's message ram
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: three entries specifying the RPM's:
+		    1. acknowledgement interrupt
+		    2. error interrupt
+		    3. wakeup interrupt
+
+- interrupt-names:
+	Usage: required
+	Value type: <string-array>
+	Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- qcom,ipc:
+	Usage: required
+	Value type: <prop-encoded-array>
+
+	Definition: three entries specifying the outgoing ipc bit used for
+		    signaling the RPM:
+		    - phandle to a syscon node representing the apcs registers
+		    - u32 representing offset to the register within the syscon
+		    - u32 representing the ipc bit within the register
+
+
+= EXAMPLE
+
+	#include <dt-bindings/mfd/qcom-rpm.h>
+
+	rpm@108000 {
+		compatible = "qcom,rpm-msm8960";
+		reg = <0x108000 0x1000>;
+		qcom,ipc = <&apcs 0x8 2>;
+
+		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+		interrupt-names = "ack", "err", "wakeup";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
new file mode 100644
index 0000000..388a6f3
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -0,0 +1,154 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB		1
+#define QCOM_RPM_APPS_FABRIC_CLK		2
+#define QCOM_RPM_APPS_FABRIC_HALT		3
+#define QCOM_RPM_APPS_FABRIC_IOCTL		4
+#define QCOM_RPM_APPS_FABRIC_MODE		5
+#define QCOM_RPM_APPS_L2_CACHE_CTL		6
+#define QCOM_RPM_CFPB_CLK			7
+#define QCOM_RPM_CXO_BUFFERS			8
+#define QCOM_RPM_CXO_CLK			9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK		10
+#define QCOM_RPM_DDR_DMM			11
+#define QCOM_RPM_EBI1_CLK			12
+#define QCOM_RPM_HDMI_SWITCH			13
+#define QCOM_RPM_MMFPB_CLK			14
+#define QCOM_RPM_MM_FABRIC_ARB			15
+#define QCOM_RPM_MM_FABRIC_CLK			16
+#define QCOM_RPM_MM_FABRIC_HALT			17
+#define QCOM_RPM_MM_FABRIC_IOCTL		18
+#define QCOM_RPM_MM_FABRIC_MODE			19
+#define QCOM_RPM_PLL_4				20
+#define QCOM_RPM_PM8058_LDO0			21
+#define QCOM_RPM_PM8058_LDO1			22
+#define QCOM_RPM_PM8058_LDO2			23
+#define QCOM_RPM_PM8058_LDO3			24
+#define QCOM_RPM_PM8058_LDO4			25
+#define QCOM_RPM_PM8058_LDO5			26
+#define QCOM_RPM_PM8058_LDO6			27
+#define QCOM_RPM_PM8058_LDO7			28
+#define QCOM_RPM_PM8058_LDO8			29
+#define QCOM_RPM_PM8058_LDO9			30
+#define QCOM_RPM_PM8058_LDO10			31
+#define QCOM_RPM_PM8058_LDO11			32
+#define QCOM_RPM_PM8058_LDO12			33
+#define QCOM_RPM_PM8058_LDO13			34
+#define QCOM_RPM_PM8058_LDO14			35
+#define QCOM_RPM_PM8058_LDO15			36
+#define QCOM_RPM_PM8058_LDO16			37
+#define QCOM_RPM_PM8058_LDO17			38
+#define QCOM_RPM_PM8058_LDO18			39
+#define QCOM_RPM_PM8058_LDO19			40
+#define QCOM_RPM_PM8058_LDO20			41
+#define QCOM_RPM_PM8058_LDO21			42
+#define QCOM_RPM_PM8058_LDO22			43
+#define QCOM_RPM_PM8058_LDO23			44
+#define QCOM_RPM_PM8058_LDO24			45
+#define QCOM_RPM_PM8058_LDO25			46
+#define QCOM_RPM_PM8058_LVS0			47
+#define QCOM_RPM_PM8058_LVS1			48
+#define QCOM_RPM_PM8058_NCP			49
+#define QCOM_RPM_PM8058_SMPS0			50
+#define QCOM_RPM_PM8058_SMPS1			51
+#define QCOM_RPM_PM8058_SMPS2			52
+#define QCOM_RPM_PM8058_SMPS3			53
+#define QCOM_RPM_PM8058_SMPS4			54
+#define QCOM_RPM_PM8821_LDO1			55
+#define QCOM_RPM_PM8821_SMPS1			56
+#define QCOM_RPM_PM8821_SMPS2			57
+#define QCOM_RPM_PM8901_LDO0			58
+#define QCOM_RPM_PM8901_LDO1			59
+#define QCOM_RPM_PM8901_LDO2			60
+#define QCOM_RPM_PM8901_LDO3			61
+#define QCOM_RPM_PM8901_LDO4			62
+#define QCOM_RPM_PM8901_LDO5			63
+#define QCOM_RPM_PM8901_LDO6			64
+#define QCOM_RPM_PM8901_LVS0			65
+#define QCOM_RPM_PM8901_LVS1			66
+#define QCOM_RPM_PM8901_LVS2			67
+#define QCOM_RPM_PM8901_LVS3			68
+#define QCOM_RPM_PM8901_MVS			69
+#define QCOM_RPM_PM8901_SMPS0			70
+#define QCOM_RPM_PM8901_SMPS1			71
+#define QCOM_RPM_PM8901_SMPS2			72
+#define QCOM_RPM_PM8901_SMPS3			73
+#define QCOM_RPM_PM8901_SMPS4			74
+#define QCOM_RPM_PM8921_CLK1			75
+#define QCOM_RPM_PM8921_CLK2			76
+#define QCOM_RPM_PM8921_LDO1			77
+#define QCOM_RPM_PM8921_LDO2			78
+#define QCOM_RPM_PM8921_LDO3			79
+#define QCOM_RPM_PM8921_LDO4			80
+#define QCOM_RPM_PM8921_LDO5			81
+#define QCOM_RPM_PM8921_LDO6			82
+#define QCOM_RPM_PM8921_LDO7			83
+#define QCOM_RPM_PM8921_LDO8			84
+#define QCOM_RPM_PM8921_LDO9			85
+#define QCOM_RPM_PM8921_LDO10			86
+#define QCOM_RPM_PM8921_LDO11			87
+#define QCOM_RPM_PM8921_LDO12			88
+#define QCOM_RPM_PM8921_LDO13			89
+#define QCOM_RPM_PM8921_LDO14			90
+#define QCOM_RPM_PM8921_LDO15			91
+#define QCOM_RPM_PM8921_LDO16			92
+#define QCOM_RPM_PM8921_LDO17			93
+#define QCOM_RPM_PM8921_LDO18			94
+#define QCOM_RPM_PM8921_LDO19			95
+#define QCOM_RPM_PM8921_LDO20			96
+#define QCOM_RPM_PM8921_LDO21			97
+#define QCOM_RPM_PM8921_LDO22			98
+#define QCOM_RPM_PM8921_LDO23			99
+#define QCOM_RPM_PM8921_LDO24			100
+#define QCOM_RPM_PM8921_LDO25			101
+#define QCOM_RPM_PM8921_LDO26			102
+#define QCOM_RPM_PM8921_LDO27			103
+#define QCOM_RPM_PM8921_LDO28			104
+#define QCOM_RPM_PM8921_LDO29			105
+#define QCOM_RPM_PM8921_LVS1			106
+#define QCOM_RPM_PM8921_LVS2			107
+#define QCOM_RPM_PM8921_LVS3			108
+#define QCOM_RPM_PM8921_LVS4			109
+#define QCOM_RPM_PM8921_LVS5			110
+#define QCOM_RPM_PM8921_LVS6			111
+#define QCOM_RPM_PM8921_LVS7			112
+#define QCOM_RPM_PM8921_MVS			113
+#define QCOM_RPM_PM8921_NCP			114
+#define QCOM_RPM_PM8921_SMPS1			115
+#define QCOM_RPM_PM8921_SMPS2			116
+#define QCOM_RPM_PM8921_SMPS3			117
+#define QCOM_RPM_PM8921_SMPS4			118
+#define QCOM_RPM_PM8921_SMPS5			119
+#define QCOM_RPM_PM8921_SMPS6			120
+#define QCOM_RPM_PM8921_SMPS7			121
+#define QCOM_RPM_PM8921_SMPS8			122
+#define QCOM_RPM_PXO_CLK			123
+#define QCOM_RPM_QDSS_CLK			124
+#define QCOM_RPM_SFPB_CLK			125
+#define QCOM_RPM_SMI_CLK			126
+#define QCOM_RPM_SYS_FABRIC_ARB			127
+#define QCOM_RPM_SYS_FABRIC_CLK			128
+#define QCOM_RPM_SYS_FABRIC_HALT		129
+#define QCOM_RPM_SYS_FABRIC_IOCTL		130
+#define QCOM_RPM_SYS_FABRIC_MODE		131
+#define QCOM_RPM_USB_OTG_SWITCH			132
+#define QCOM_RPM_VDDMIN_GPIO			133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE		0
+#define QCOM_RPM_FORCE_MODE_LPM			1
+#define QCOM_RPM_FORCE_MODE_HPM			2
+#define QCOM_RPM_FORCE_MODE_AUTO		3
+#define QCOM_RPM_FORCE_MODE_BYPASS		4
+
+#endif
-- 
1.8.2.2