LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Jiang Liu <jiang.liu@linux.intel.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Joerg Roedel <joro@8bytes.org>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	Yinghai Lu <yinghai@kernel.org>, Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
	Tony Luck <tony.luck@intel.com>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org
Subject: [Patch v2 16/16] iommu/irq_remapping: Normailize the way to detect whether IR is enabled
Date: Wed,  7 Jan 2015 15:31:43 +0800
Message-ID: <1420615903-28253-17-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1420615903-28253-1-git-send-email-jiang.liu@linux.intel.com>

Refine code by normailizing the way to detect whether IR is enabled.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
 drivers/iommu/irq_remapping.c |   38 ++++++++++++++------------------------
 1 file changed, 14 insertions(+), 24 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 5585c4e17e39..390079ee1350 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -218,7 +218,7 @@ int __init irq_remapping_enable(void)
 {
 	int ret;
 
-	if (!remap_ops || !remap_ops->enable)
+	if (!remap_ops->enable)
 		return -ENODEV;
 
 	ret = remap_ops->enable();
@@ -231,22 +231,16 @@ int __init irq_remapping_enable(void)
 
 void irq_remapping_disable(void)
 {
-	if (!irq_remapping_enabled ||
-	    !remap_ops ||
-	    !remap_ops->disable)
-		return;
-
-	remap_ops->disable();
+	if (irq_remapping_enabled && remap_ops->disable)
+		remap_ops->disable();
 }
 
 int irq_remapping_reenable(int mode)
 {
-	if (!irq_remapping_enabled ||
-	    !remap_ops ||
-	    !remap_ops->reenable)
-		return 0;
+	if (irq_remapping_enabled && remap_ops->reenable)
+		return remap_ops->reenable(mode);
 
-	return remap_ops->reenable(mode);
+	return 0;
 }
 
 int __init irq_remap_enable_fault_handling(void)
@@ -254,7 +248,7 @@ int __init irq_remap_enable_fault_handling(void)
 	if (!irq_remapping_enabled)
 		return 0;
 
-	if (!remap_ops || !remap_ops->enable_faulting)
+	if (!remap_ops->enable_faulting)
 		return -ENODEV;
 
 	return remap_ops->enable_faulting();
@@ -265,7 +259,7 @@ int setup_ioapic_remapped_entry(int irq,
 				unsigned int destination, int vector,
 				struct io_apic_irq_attr *attr)
 {
-	if (!remap_ops || !remap_ops->setup_ioapic_entry)
+	if (!remap_ops->setup_ioapic_entry)
 		return -ENODEV;
 
 	return remap_ops->setup_ioapic_entry(irq, entry, destination,
@@ -275,8 +269,7 @@ int setup_ioapic_remapped_entry(int irq,
 static int set_remapped_irq_affinity(struct irq_data *data,
 				     const struct cpumask *mask, bool force)
 {
-	if (!config_enabled(CONFIG_SMP) || !remap_ops ||
-	    !remap_ops->set_affinity)
+	if (!config_enabled(CONFIG_SMP) || !remap_ops->set_affinity)
 		return 0;
 
 	return remap_ops->set_affinity(data, mask, force);
@@ -286,10 +279,7 @@ void free_remapped_irq(int irq)
 {
 	struct irq_cfg *cfg = irq_cfg(irq);
 
-	if (!remap_ops || !remap_ops->free_irq)
-		return;
-
-	if (irq_remapped(cfg))
+	if (irq_remapped(cfg) && remap_ops->free_irq)
 		remap_ops->free_irq(irq);
 }
 
@@ -301,13 +291,13 @@ void compose_remapped_msi_msg(struct pci_dev *pdev,
 
 	if (!irq_remapped(cfg))
 		native_compose_msi_msg(pdev, irq, dest, msg, hpet_id);
-	else if (remap_ops && remap_ops->compose_msi_msg)
+	else if (remap_ops->compose_msi_msg)
 		remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
 }
 
 static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
 {
-	if (!remap_ops || !remap_ops->msi_alloc_irq)
+	if (!remap_ops->msi_alloc_irq)
 		return -ENODEV;
 
 	return remap_ops->msi_alloc_irq(pdev, irq, nvec);
@@ -316,7 +306,7 @@ static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
 static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
 				  int index, int sub_handle)
 {
-	if (!remap_ops || !remap_ops->msi_setup_irq)
+	if (!remap_ops->msi_setup_irq)
 		return -ENODEV;
 
 	return remap_ops->msi_setup_irq(pdev, irq, index, sub_handle);
@@ -326,7 +316,7 @@ int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
 {
 	int ret;
 
-	if (!remap_ops || !remap_ops->alloc_hpet_msi)
+	if (!remap_ops->alloc_hpet_msi)
 		return -ENODEV;
 
 	ret = remap_ops->alloc_hpet_msi(irq, id);
-- 
1.7.10.4


  parent reply index

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-07  7:31 [Patch v2 00/16] Refine IR initialization flow and fixes bugs related to X2APIC Jiang Liu
2015-01-07  7:31 ` [Patch v2 01/16] iommu, x86: Restructure setup of the irq remapping feature Jiang Liu
2015-01-15 12:58   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-01-07  7:31 ` [Patch v2 02/16] iommu/vt-d: Move iommu preparatory allocations to irq_remap_ops.prepare Jiang Liu
2015-01-15 12:58   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-01-07  7:31 ` [Patch v2 03/16] iommu/vt-d: Convert allocations to GFP_KERNEL Jiang Liu
2015-01-15 12:59   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-01-07  7:31 ` [Patch v2 04/16] x86/apic: Panic if kernel doesn't support x2apic but BIOS has enabled x2apic Jiang Liu
2015-01-15 12:59   ` [tip:x86/apic] x86/apic: Panic if kernel doesn' t " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 05/16] x86/apic: Kill useless variable x2apic_enabled in function enable_IR_x2apic() Jiang Liu
2015-01-15 12:59   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 06/16] x86/apic: Correctly detect X2APIC status in function enable_IR() Jiang Liu
2015-01-15 13:00   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 07/16] x86/apic: Refine enable_IR_x2apic() and related functions Jiang Liu
2015-01-15  9:24   ` Thomas Gleixner
2015-01-15 13:00   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-15 13:00   ` [tip:x86/apic] x86/apic: Handle XAPIC remap mode proper tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 08/16] iommu/vt-d: Prepare for killing function irq_remapping_supported() Jiang Liu
2015-01-15 13:01   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 09/16] iommu/vt-d: Allocate IRQ remapping data structures only for all IOMMUs Jiang Liu
2015-01-15 13:01   ` [tip:x86/apic] " tip-bot for Joerg Roedel
2015-01-07  7:31 ` [Patch v2 10/16] iommu/vt-d: Allow IR works in XAPIC mode though CPU works in X2APIC mode Jiang Liu
2015-01-15 13:01   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 11/16] x86/apic: Only disable CPU x2apic mode when necessary Jiang Liu
2015-01-15 13:02   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 12/16] iommu/amd: Check for irq-remap support amd_iommu_prepare() Jiang Liu
2015-01-15 13:02   ` [tip:x86/apic] " tip-bot for Joerg Roedel
2015-01-07  7:31 ` [Patch v2 13/16] iommu/irq_remapping: Kill function irq_remapping_supported() and related code Jiang Liu
2015-01-15 13:02   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 14/16] iommu/irq_remapping: Refine function irq_remapping_prepare() for maintenance Jiang Liu
2015-01-15 13:03   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 15/16] iommu/irq_remapping: Change variable disable_irq_remap to be static Jiang Liu
2015-01-15 13:03   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` Jiang Liu [this message]
2015-01-15 13:03   ` [tip:x86/apic] iommu/irq_remapping: Normailize the way to detect whether IR is enabled tip-bot for Jiang Liu
2015-01-09 12:03 ` [Patch v2 00/16] Refine IR initialization flow and fixes bugs related to X2APIC Joerg Roedel
  -- strict thread matches above, loose matches on Subject: below --
2014-12-05  8:48 [patch 0/5] x86/iommu: Bootup stage cleanups Thomas Gleixner
2014-12-05  8:48 ` [patch 1/5] x86, smpboot: Remove pointless preempt_disable() in native_smp_prepare_cpus() Thomas Gleixner
2014-12-05 23:25   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-19 14:02   ` tip-bot for Thomas Gleixner
2014-12-05  8:48 ` [patch 2/5] iommu, x86: Restructure setup of the irq remapping feature Thomas Gleixner
2014-12-05 23:25   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-05  8:48 ` [patch 3/5] iommu/vt-d: Move iommu preparatory allocations to irq_remap_ops.prepare Thomas Gleixner
2014-12-05 23:26   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-11  7:35     ` Yinghai Lu
2014-12-11 14:33       ` Jiang Liu
2014-12-11 17:57         ` Yinghai Lu
2014-12-11 20:30           ` Thomas Gleixner
2014-12-12  2:04             ` Yinghai Lu
2015-04-27 22:46               ` Yinghai Lu
2015-04-29  8:15                 ` Jiang Liu
2014-12-05  8:48 ` [patch 4/5] irqdomain: Revert gfp hackery Thomas Gleixner
2014-12-05 23:26   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-05  8:48 ` [patch 5/5] iommu/vt-d: Convert allocations to GFP_KERNEL Thomas Gleixner
2014-12-05 23:26   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-05 12:22 ` [patch 0/5] x86/iommu: Bootup stage cleanups Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420615903-28253-17-git-send-email-jiang.liu@linux.intel.com \
    --to=jiang.liu@linux.intel.com \
    --cc=benh@kernel.crashing.org \
    --cc=bp@alien8.de \
    --cc=hpa@zytor.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git