From: Chao Xie <chao.xie@marvell.com>
To: <mark.rutland@arm.com>, <daniel.lezcano@linaro.org>,
<tglx@linutronix.de>, <chao.xie@marvell.com>,
<haojian.zhuang@linaro.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Subject: [PATCH 3/4] arm: mmp: make SOCes with DT use new timer driver
Date: Mon, 2 Feb 2015 16:31:38 +0800 [thread overview]
Message-ID: <1422865899-8152-4-git-send-email-chao.xie@marvell.com> (raw)
In-Reply-To: <1422865899-8152-1-git-send-email-chao.xie@marvell.com>
From: Chao Xie <chao.xie@marvell.com>
Change the dtsi and DT support for mmp SOCes to make them
use the new timer driver.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
arch/arm/boot/dts/mmp2.dtsi | 19 ++++++++++++++++---
arch/arm/boot/dts/pxa168.dtsi | 20 +++++++++++++++++---
arch/arm/boot/dts/pxa910.dtsi | 26 ++++++++++++++++----------
arch/arm/mach-mmp/Kconfig | 2 ++
arch/arm/mach-mmp/mmp-dt.c | 4 +++-
arch/arm/mach-mmp/mmp2-dt.c | 4 +++-
6 files changed, 57 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8..e63e3a3 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -127,9 +127,22 @@
ranges;
timer0: timer@d4014000 {
- compatible = "mrvl,mmp-timer";
- reg = <0xd4014000 0x100>;
- interrupts = <13>;
+ compatible = "marvell,mmp-timer";
+ reg = <0xd4014000 0xc8>;
+ clocks = <&soc_clocks MMP2_CLK_VCTCXO>, <&soc_clocks MMP2_CLK_TIMER>;
+ status = "okay";
+
+ counter0 {
+ compatible = "marvell,timer-counter-clkevt";
+ interrupts = <13>;
+ marvell,timer-counter-id = <0>;
+ marvell,timer-counter-cpu = <0>;
+ };
+
+ counter1 {
+ compatible = "marvell,timer-counter-clksrc";
+ marvell,timer-counter-id = <1>;
+ };
};
uart1: uart@d4030000 {
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index b899e25..5a2f385 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -51,9 +51,23 @@
ranges;
timer0: timer@d4014000 {
- compatible = "mrvl,mmp-timer";
- reg = <0xd4014000 0x100>;
- interrupts = <13>;
+ compatible = "marvell,mmp-timer";
+ reg = <0xd4014000 0xc8>;
+ clocks = <&soc_clocks PXA168_CLK_PLL1_24>, <&soc_clocks PXA168_CLK_TIMER>;
+ status = "okay";
+
+ counter0 {
+ compatible = "marvell,timer-counter-clkevt";
+ interrupts = <13>;
+ marvell,timer-counter-id = <0>;
+ marvell,timer-counter-cpu = <0>;
+ };
+
+ counter1 {
+ compatible = "marvell,timer-counter-clksrc";
+ marvell,timer-counter-id = <1>;
+ };
+
};
uart1: uart@d4017000 {
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 0868f67..beb25fc 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -56,16 +56,22 @@
ranges;
timer0: timer@d4014000 {
- compatible = "mrvl,mmp-timer";
- reg = <0xd4014000 0x100>;
- interrupts = <13>;
- };
-
- timer1: timer@d4016000 {
- compatible = "mrvl,mmp-timer";
- reg = <0xd4016000 0x100>;
- interrupts = <29>;
- status = "disabled";
+ compatible = "marvell,mmp-timer";
+ reg = <0xd4014000 0xc8>;
+ clocks = <&soc_clocks PXA910_CLK_PLL1_24>, <&soc_clocks PXA910_CLK_TIMER0>;
+ status = "okay";
+
+ counter0 {
+ compatible = "marvell,timer-counter-clkevt";
+ interrupts = <13>;
+ marvell,timer-counter-id = <0>;
+ marvell,timer-counter-cpu = <0>;
+ };
+
+ counter1 {
+ compatible = "marvell,timer-counter-clksrc";
+ marvell,timer-counter-id = <1>;
+ };
};
uart1: uart@d4017000 {
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index fdbfadf..4bbe202 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -87,6 +87,7 @@ config MACH_GPLUGD
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
select USE_OF
+ select CLKSRC_OF
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
@@ -101,6 +102,7 @@ config MACH_MMP2_DT
bool "Support MMP2 (ARMv7) platforms from device tree"
depends on !CPU_MOHAWK
select USE_OF
+ select CLKSRC_OF
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index b2296c9..2e91871 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -12,6 +12,7 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-tauros2.h>
@@ -35,8 +36,9 @@ static void __init mmp_init_time(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- mmp_dt_init_timer();
of_clk_init(NULL);
+ /* Initialize timers. */
+ clocksource_of_init();
}
DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 998c0f5..a42d32e 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -13,6 +13,7 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-tauros2.h>
@@ -26,8 +27,9 @@ static void __init mmp_init_time(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- mmp_dt_init_timer();
of_clk_init(NULL);
+ /* Initialize timers. */
+ clocksource_of_init();
}
static const char *mmp2_dt_board_compat[] __initdata = {
--
1.8.3.2
next prev parent reply other threads:[~2015-02-02 8:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-02 8:31 [PATCH 0/4] drivers: clocksource: add mmp timer driver Chao Xie
2015-02-02 8:31 ` [PATCH 1/4] clocksource: mmp: " Chao Xie
2015-02-02 10:34 ` Mark Rutland
2015-02-02 8:31 ` [PATCH 2/4] arm: mmp: make SOCes without DT use new " Chao Xie
2015-02-02 8:31 ` Chao Xie [this message]
2015-02-02 8:31 ` [PATCH 4/4] arm: mmp: remove the old " Chao Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422865899-8152-4-git-send-email-chao.xie@marvell.com \
--to=chao.xie@marvell.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=haojian.zhuang@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).