linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bo Shen <voice.shen@atmel.com>
To: Mark Brown <broonie@kernel.org>,
	Manuel Lauss <manuel.lauss@googlemail.com>,
	Liam Girdwood <lrg@slimlogic.co.uk>,
	Richard Purdie <richard@openedhand.com>,
	<patches@opensource.wolfsonmicro.com>
Cc: <linux-sound@vger.kernel.org>, <alsa-devel@alsa-project.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, Bo Shen <voice.shen@atmel.com>
Subject: [PATCH] ASoC: wm8731: let codec to manage clock by itself
Date: Thu, 5 Feb 2015 15:35:13 +0800	[thread overview]
Message-ID: <1423121713-19434-1-git-send-email-voice.shen@atmel.com> (raw)

Let the wm8731 codec to manage clock by itself.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/codecs/wm8731.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index b115ed8..ecd8424 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -13,6 +13,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
@@ -45,6 +46,7 @@ static const char *wm8731_supply_names[WM8731_NUM_SUPPLIES] = {
 /* codec private data */
 struct wm8731_priv {
 	struct regmap *regmap;
+	struct clk *mclk;
 	struct regulator_bulk_data supplies[WM8731_NUM_SUPPLIES];
 	const struct snd_pcm_hw_constraint_list *constraints;
 	unsigned int sysclk;
@@ -389,6 +391,9 @@ static int wm8731_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	switch (clk_id) {
 	case WM8731_SYSCLK_XTAL:
 	case WM8731_SYSCLK_MCLK:
+		if (IS_ENABLED(CONFIG_COMMON_CLK))
+			if (clk_set_rate(wm8731->mclk, freq))
+				return -EINVAL;
 		wm8731->sysclk_type = clk_id;
 		break;
 	default:
@@ -490,6 +495,9 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec,
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
+		if (IS_ENABLED(CONFIG_COMMON_CLK))
+			if (clk_prepare_enable(wm8731->mclk))
+				return -EINVAL;
 		break;
 	case SND_SOC_BIAS_PREPARE:
 		break;
@@ -508,6 +516,8 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec,
 		snd_soc_write(codec, WM8731_PWR, reg | 0x0040);
 		break;
 	case SND_SOC_BIAS_OFF:
+		if (IS_ENABLED(CONFIG_COMMON_CLK))
+			clk_disable_unprepare(wm8731->mclk);
 		snd_soc_write(codec, WM8731_PWR, 0xffff);
 		regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies),
 				       wm8731->supplies);
@@ -666,6 +676,15 @@ static int wm8731_spi_probe(struct spi_device *spi)
 	if (wm8731 == NULL)
 		return -ENOMEM;
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		wm8731->mclk = devm_clk_get(&spi->dev, "mclk");
+		if (IS_ERR(wm8731->mclk)) {
+			ret = PTR_ERR(wm8731->mclk);
+			dev_err(&spi->dev, "Failed to get MCLK\n");
+			return ret;
+		}
+	}
+
 	mutex_init(&wm8731->lock);
 
 	wm8731->regmap = devm_regmap_init_spi(spi, &wm8731_regmap);
@@ -717,6 +736,15 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 	if (wm8731 == NULL)
 		return -ENOMEM;
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		wm8731->mclk = devm_clk_get(&i2c->dev, "mclk");
+		if (IS_ERR(wm8731->mclk)) {
+			ret = PTR_ERR(wm8731->mclk);
+			dev_err(&i2c->dev, "Failed to get MCLK\n");
+			return ret;
+		}
+	}
+
 	mutex_init(&wm8731->lock);
 
 	wm8731->regmap = devm_regmap_init_i2c(i2c, &wm8731_regmap);
-- 
2.3.0.rc0


             reply	other threads:[~2015-02-05  7:35 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-05  7:35 Bo Shen [this message]
2015-02-12  8:23 ` [PATCH] ASoC: wm8731: let codec to manage clock by itself Bo Shen
2015-02-16 10:31   ` [alsa-devel] " Charles Keepax
2015-02-16 12:58     ` Manuel Lauss
2015-03-02  2:00       ` Bo Shen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1423121713-19434-1-git-send-email-voice.shen@atmel.com \
    --to=voice.shen@atmel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=lrg@slimlogic.co.uk \
    --cc=manuel.lauss@googlemail.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=richard@openedhand.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).