From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754408AbbCBQLe (ORCPT ); Mon, 2 Mar 2015 11:11:34 -0500 Received: from foss.arm.com ([217.140.101.70]:47646 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752715AbbCBQLb (ORCPT ); Mon, 2 Mar 2015 11:11:31 -0500 Message-ID: <1425312688.3092.10.camel@arm.com> Subject: Re: [PATCH] video: ARM CLCD: Added dt support to set tim2 register From: Pawel Moll To: Arun Ramamurthy Cc: Rob Herring , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Jean-Christophe Plagniol-Villard , Tomi Valkeinen , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-fbdev@vger.kernel.org" , Dmitry Torokhov , Anatol Pomazau , Jonathan Richardson , Scott Branden , Ray Jui , "bcm-kernel-feedback-list@broadcom.com" Date: Mon, 02 Mar 2015 16:11:28 +0000 In-Reply-To: <1424898082-1522-1-git-send-email-arun.ramamurthy@broadcom.com> References: <1424898082-1522-1-git-send-email-arun.ramamurthy@broadcom.com> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.12.10-0ubuntu1~14.10.1 Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, 2015-02-25 at 21:01 +0000, Arun Ramamurthy wrote: > Added code based on linaro tree: > http://git.linaro.org/kernel/linux-linaro-stable.git > with commit id:6846e7822c4cab5a84672baace3b768c2d0db142 > at drivers/video/amba-clcd.c. This lets the driver set > certain tim2 register bits after reading them from > device tree. > > Reviewed-by: Ray Jui > Reviewed-by: Scott Branden > Signed-off-by: Arun Ramamurthy > --- > .../devicetree/bindings/video/arm,pl11x.txt | 17 ++++++++- > drivers/video/fbdev/amba-clcd.c | 41 ++++++++++++++++++++++ > 2 files changed, 57 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt > index 3e3039a..14d6f87 100644 > --- a/Documentation/devicetree/bindings/video/arm,pl11x.txt > +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt > @@ -35,6 +35,21 @@ Optional properties: > cell's memory interface can handle; if not present, the memory > interface is fast enough to handle all possible video modes > > +- tim2: Used to set certain bits in LCDTiming2 register. > + It can be TIM2_CLKSEL or TIM2_IOE or both > + > + TIM2_CLKSEL: This bit drives the CLCDCLKSEL signal. It is the select > + signal for the external LCD clock multiplexor. > + > + TIM2_IOE: Invert output enable: > + 0 = CLAC output pin is active HIGH in TFT mode > + 1 = CLAC output pin is active LOW in TFT mode. > + This bit selects the active polarity of the output enable signal in > + TFT mode. In this mode, the CLAC pin is an enable that indicates to > + the LCD panel when valid display data is available. In active > + display mode, data is driven onto the LCD data lines at the > + programmed edge of CLCP when CLAC is in its active state. > + The existing bindings intentionally avoided quoting internal registers - they are supposed to describe how the hardware is wired up... So how about something like "arm,pl11x,tft-invert-clac"? Then the driver sets the bit or not, depending on the property existance? Pawel