linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rameshwar Prasad Sahu <rsahu@apm.com>
To: vinod.koul@intel.com, dan.j.williams@intel.com
Cc: dmaengine@vger.kernel.org, arnd@arndb.de,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, ddutile@redhat.com,
	jcm@redhat.com, patches@apm.com,
	Rameshwar Prasad Sahu <rsahu@apm.com>, Loc Ho <lho@apm.com>
Subject: [PATCH v7 3/3] Documentation: dma: Add APM X-Gene SoC DMA engine driver documentation
Date: Thu, 12 Mar 2015 16:45:21 +0530	[thread overview]
Message-ID: <1426158921-8987-4-git-send-email-rsahu@apm.com> (raw)
In-Reply-To: <1426158921-8987-1-git-send-email-rsahu@apm.com>

This patch adds device tree binding for APM X-Gene SoC DMA engine driver.

Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
---
 .../devicetree/bindings/dma/apm-xgene-dma.txt      | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/apm-xgene-dma.txt

diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
new file mode 100644
index 0000000..d305876
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
@@ -0,0 +1,47 @@
+Applied Micro X-Gene SoC DMA nodes
+
+DMA nodes are defined to describe on-chip DMA interfaces in
+APM X-Gene SoC.
+
+Required properties for DMA interfaces:
+- compatible: Should be "apm,xgene-dma".
+- device_type: set to "dma".
+- reg: Address and length of the register set for the device.
+  It contains the information of registers in the following order:
+  1st - DMA control and status register address space.
+  2nd - Descriptor ring control and status register address space.
+  3rd - Descriptor ring command register address space.
+  4th - Soc efuse register address space.
+- interrupts: DMA has 5 interrupts sources. 1st interrupt is
+  DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
+  are completion interrupts for each DMA channels.
+- clocks: Reference to the clock entry.
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+
+Example:
+	dmaclk: dmaclk@1f27c000 {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		reg = <0x0 0x1f27c000 0x0 0x1000>;
+		reg-names = "csr-reg";
+		clock-output-names = "dmaclk";
+	};
+
+	dma: dma@1f270000 {
+			compatible = "apm,xgene-storm-dma";
+			device_type = "dma";
+			reg = <0x0 0x1f270000 0x0 0x10000>,
+			      <0x0 0x1f200000 0x0 0x10000>,
+			      <0x0 0x1b008000 0x0 0x2000>,
+			      <0x0 0x1054a000 0x0 0x100>;
+			interrupts = <0x0 0x82 0x4>,
+				     <0x0 0xb8 0x4>,
+				     <0x0 0xb9 0x4>,
+				     <0x0 0xba 0x4>,
+				     <0x0 0xbb 0x4>;
+			dma-coherent;
+			clocks = <&dmaclk 0>;
+	};
--
1.8.2.1


  parent reply	other threads:[~2015-03-12 11:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-12 11:15 [PATCH v7 0/3] dmaengine: APM X-Gene SoC DMA engine driver support Rameshwar Prasad Sahu
2015-03-12 11:15 ` [PATCH v7 1/3] dmaengine: Add support for APM X-Gene SoC DMA engine driver Rameshwar Prasad Sahu
2015-03-16  9:27   ` Vinod Koul
2015-03-16 10:30     ` Rameshwar Sahu
2015-03-16 11:27       ` Vinod Koul
2015-03-16 11:54         ` Rameshwar Sahu
2015-03-16 16:26           ` Vinod Koul
2015-03-16 17:31             ` Rameshwar Sahu
2015-03-17  9:33               ` Rameshwar Sahu
2015-03-17 10:19                 ` Vinod Koul
2015-03-17 10:38                   ` Rameshwar Sahu
2015-03-16 11:02     ` Rameshwar Sahu
2015-03-12 11:15 ` [PATCH v7 2/3] arm64: dts: Add APM X-Gene DMA device and DMA clock DTS nodes Rameshwar Prasad Sahu
2015-03-12 11:15 ` Rameshwar Prasad Sahu [this message]
2015-03-16  9:29   ` [PATCH v7 3/3] Documentation: dma: Add APM X-Gene SoC DMA engine driver documentation Vinod Koul
2015-03-16 10:31     ` Rameshwar Sahu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426158921-8987-4-git-send-email-rsahu@apm.com \
    --to=rsahu@apm.com \
    --cc=arnd@arndb.de \
    --cc=dan.j.williams@intel.com \
    --cc=ddutile@redhat.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=jcm@redhat.com \
    --cc=lho@apm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@apm.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).