From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753565AbbCND5Y (ORCPT ); Fri, 13 Mar 2015 23:57:24 -0400 Received: from smtp.csie.ntu.edu.tw ([140.112.30.61]:48959 "EHLO smtp.csie.ntu.edu.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751169AbbCND5V (ORCPT ); Fri, 13 Mar 2015 23:57:21 -0400 From: Chen-Yu Tsai To: Kishon Vijay Abraham I , Maxime Ripard Cc: Chen-Yu Tsai , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Paul Bolle Subject: [PATCH v5 0/2] ARM: sun9i: Add USB host controller support for A80 Date: Sat, 14 Mar 2015 11:57:15 +0800 Message-Id: <1426305437-15208-1-git-send-email-wens@csie.org> X-Mailer: git-send-email 2.1.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone, This is v5 of my A80 USB support series. v5 addresses some comments on the phy driver, and adds a patch switching the dts from phy driver regulator bindings to phy core bindings. Changes since v4: - Fixed copyright date - Dropped unused header files - Dropped regulator code in the phy driver in favor of phy core power sequencing code - Dropped unneeded dev_set_drvdata() - Fixed MODULE_LICENSE to say GPL, matching header - Dropped unneeded "select USB_PHY" in Kconfig - Mention optional "phy-supply" property in bindings - Added "ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys" Regards ChenYu Chen-Yu Tsai (2): phy: Add driver to support individual USB PHYs on sun9i ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys .../devicetree/bindings/phy/sun9i-usb-phy.txt | 38 ++++ arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 +- drivers/phy/Kconfig | 11 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-sun9i-usb.c | 202 +++++++++++++++++++++ 5 files changed, 254 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt create mode 100644 drivers/phy/phy-sun9i-usb.c -- 2.1.4