From: Howard Chen <howard.chen@linaro.org>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Howard Chen <howard.chen@linaro.org>,
Eddie Huang <eddie.huang@mediatek.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
srv_heupstream@mediatek.com, Sascha Hauer <kernel@pengutronix.de>
Subject: [PATCH] ARM: dts: mt8173: support arm64 cpuidle-dt
Date: Tue, 31 Mar 2015 11:24:37 +0800 [thread overview]
Message-ID: <1427772277-2414-1-git-send-email-howard.chen@linaro.org> (raw)
add an idle-states node to describe the mt8173 cpu idle
add a reference to the idle-states node in each CPU node
Signed-off-by: Howard Chen <howard.chen@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 30 ++++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 8554ec3..96dff1e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -48,6 +48,8 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
};
cpu1: cpu@1 {
@@ -55,6 +57,7 @@
compatible = "arm,cortex-a53";
reg = <0x001>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
};
cpu2: cpu@100 {
@@ -62,6 +65,7 @@
compatible = "arm,cortex-a57";
reg = <0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
};
cpu3: cpu@101 {
@@ -69,15 +73,33 @@
compatible = "arm,cortex-a57";
reg = <0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
};
+
+ idle-states {
+ entry-method = "arm,psci-0.2";
+
+ CPU_SLEEP_0_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <600>;
+ exit-latency-us = <600>;
+ min-residency-us = <1200>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <800>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2000>;
+ wakeup-latency-us = <1000>;
+ };
};
psci {
- compatible = "arm,psci";
+ compatible = "arm,psci-0.2";
method = "smc";
- cpu_suspend = <0x84000001>;
- cpu_off = <0x84000002>;
- cpu_on = <0x84000003>;
};
uart_clk: dummy26m {
--
1.9.1
next reply other threads:[~2015-03-31 3:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 3:24 Howard Chen [this message]
2015-03-31 15:33 ` [PATCH] ARM: dts: mt8173: support arm64 cpuidle-dt Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427772277-2414-1-git-send-email-howard.chen@linaro.org \
--to=howard.chen@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).