From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754877AbbDNNz6 (ORCPT ); Tue, 14 Apr 2015 09:55:58 -0400 Received: from mailgw02.mediatek.com ([218.249.47.111]:46565 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1753376AbbDNNzu (ORCPT ); Tue, 14 Apr 2015 09:55:50 -0400 X-Listener-Flag: 11101 Message-ID: <1429019742.16400.1.camel@mhfsdcap03> Subject: Re: [PATCH 3/5] dt-bindings: mediatek: Add smi dts binding From: Yong Wu To: Mark Rutland CC: "devicetree@vger.kernel.org" , "srv_heupstream@mediatek.com" , "Catalin Marinas" , Joerg Roedel , "Will Deacon" , "linux-kernel@vger.kernel.org" , Tomasz Figa , "iommu@lists.linux-foundation.org" , "Rob Herring" , Daniel Kurtz , "Sasha Hauer" , Matthias Brugger , "linux-mediatek@lists.infradead.org" , Robin Murphy , "linux-arm-kernel@lists.infradead.org" , Lucas Stach Date: Tue, 14 Apr 2015 21:55:42 +0800 In-Reply-To: <1429019389.16264.5.camel@mhfsdcap03> References: <1425638900-24989-1-git-send-email-yong.wu@mediatek.com> <1425638900-24989-4-git-send-email-yong.wu@mediatek.com> <20150306111338.GD8700@leverpostej> <1429002474.14855.7.camel@mhfsdcap03> <20150414100657.GB28709@leverpostej> <1429019389.16264.5.camel@mhfsdcap03> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.2.3-0ubuntu6 Content-Transfer-Encoding: 8bit MIME-Version: 1.0 X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, 2015-04-14 at 21:49 +0800, Yong Wu wrote: > Hi Mark, > > On Tue, 2015-04-14 at 11:06 +0100, Mark Rutland wrote: > > On Tue, Apr 14, 2015 at 10:07:54AM +0100, Yong Wu wrote: > > > Hi Mark, > > > Thanks very much for review. > > > About the clock name should be the PoV of _this_ device. Could you > > > help check below? > > > > > > On Fri, 2015-03-06 at 11:13 +0000, Mark Rutland wrote: > > > > On Fri, Mar 06, 2015 at 10:48:18AM +0000, yong.wu@mediatek.com wrote: > > > > > From: Yong Wu > > > > > > > > > > This patch add smi binding document. > > > > > > > > Please move binding documents to the start of the series. It makes > > > > things far easier to review. > > > > > > > > What does "larb" mean? It would be nice for the intorductory paragraph > > > > in this file to explain. > > > > > > > > > +- reg : the register of each local arbiter > > > > > +- clocks : the clocks of each local arbiter > > > > > +- clock-name: larb_sub*(3 clockes at most) > > > > > > > > The names required _must_ be specified here, or clock-names is > > > > pointless. > > > > > > > > The clock names should be from the PoV of _this_ device (i.e. they > > > > should be the names of the inputs) not from the PoV of the provider > > > > (i.e. they should not be the names of the outputs from the provider). > > > > > > > > Mark. > > > > > > > After we check with our SMI Designer. Every SMI local arbiter need > > > two clocks, which is called APB clocks and SMI clock. > > > APB clock : Advanced Peripheral Bus Clock. It is the clock for > > > setting the register of local arbiter. > > > SMI clock : Smart Multimedia Interface Clock, It is the clock for > > > transfering the data and command. > > > > > > And all the local arbiters need the smi common clock, so we > > > separate it. > > > > > > Then I prepare to design the smi the dtsi like this: > > > > > > smi_common:smi@14022000 { > > > compatible = “mediate, mt8173-smi”; > > > reg = <0 0x14022000 0 0x1000>; > > > clocks = <&mmsys MM_SMI_COMMON>; > > > clocks-names = “smi_common”; > > > }; > > > > > > larb0: larb@14021000 { > > > compatible = “mediate, mt8173-smi-larb”; > > > reg = <0 0x14021000 0 0x1000>; > > > smi = <&smi_common>; > > > clocks = <&mmsys MM_SMI_LARB0>, > > > <&mmsys MM_SMI_LARB0>; > > > clocks-names = “apb_clk”, “smi_clk”; > > > }; > > > > > > larb1: larb@16010000 { > > > compatible = “mediate, mt8173-smi-larb”; > > > reg = <0 0x16010000 0 0x1000>; > > > smi = <&smi_common>; > > > clocks = <&vdecsys VDEC_CKEN>, > > > <&mmsys VDEC_LARB_CKEN>; > > > clocks-names = “apb_clk”, “smi_clk”; > > > }; > > > … > > > In some local arbiter, the source clock of the APB clock and the > > > SMI clock may be the same, like larb0. so the two clocks are the same. > > > And they may be different in other local arbiteres, like larb1. > > > > > > If it is designed like this, is it ok? > > > > That looks pretty good; the clocks and names on the larb nodes seem > > sensible. > > > > The naming of the "smi_common" clock on the smi_common node looks a bit > > odd though. Is that really what the clock input is called? > > > > Mark. > After check with DE, the smi_common clock also have its APB clock > and the smi clock(they have the same clock source). > And I prepare to delete "_clk" in all the clock-names. > So it may be like this: > smi_common:smi@14022000 { > compatible = “mediate, mt8173-smi”; > reg = <0 0x14022000 0 0x1000>; > clocks = <&mmsys MM_SMI_COMMON>, > <&mmsys MM_SMI_COMMON>; > clocks-names = “apk”,"smi"; > }; > How about this? Sorry, I wrote wrong, it should be clock-names = “apb”,"smi"; > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek