linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Lee Jones <lee.jones@linaro.org>,
	Mike Turquette <mturquette@linaro.org>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/5] ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
Date: Fri,  1 May 2015 00:10:05 +0800	[thread overview]
Message-ID: <1430410206-4410-5-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1430410206-4410-1-git-send-email-wens@csie.org>

This adds the PRCM clocks and reset controls to the A80 dtsi.

The list of apbs clock gates is incomplete. Tests show that bits 0~20
are mutable. We will need documents from Allwinner to complete the
support.

Also update clock and reset phandles for r_uart.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 64 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 63 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index d3dece2eea72..f0869ff8006f 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -169,6 +169,14 @@
 					     "usb_phy2", "usb_hsic_12M";
 		};
 
+		pll3: clk@06000008 {
+			/* placeholder until implemented */
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-rate = <0>;
+			clock-output-names = "pll3";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -751,13 +759,67 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		prcm@08001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+
+			cpus_clk: cpus_clk {
+				compatible = "allwinner,sun9i-a80-cpus-clk";
+				#clock-cells = <0>;
+				clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+				clock-output-names = "cpus";
+			};
+
+			ahbs: ahbs_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&cpus_clk>;
+				clock-output-names = "ahbs";
+			};
+
+			apbs: apbs_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahbs>;
+				clock-output-names = "apbs";
+			};
+
+			apbs_gates: apbs_gates_clk {
+				compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apbs>;
+				clock-output-names = "apbs_pio", "apbs_ir",
+						"apbs_timer", "apbs_rsb",
+						"apbs_uart", "apbs_1wire",
+						"apbs_i2c0", "apbs_i2c1",
+						"apbs_ps2_0", "apbs_ps2_1",
+						"apbs_dma", "apbs_i2s0",
+						"apbs_i2s1", "apbs_twd";
+			};
+
+			r_ir_clk: r_ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&osc32k>, <&osc24M>;
+				clock-output-names = "r_ir";
+			};
+
+			apbs_rst: apbs_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		r_uart: serial@08002800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x08002800 0x400>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
 			status = "disabled";
 		};
 	};
-- 
2.1.4


  parent reply	other threads:[~2015-04-30 16:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-30 16:10 [PATCH v2 0/5] ARM: sun9i: Add support for PRCM on Allwinner A80 SoC Chen-Yu Tsai
2015-04-30 16:10 ` [PATCH v2 1/5] clk: sunxi: sun6i-apb0: Add support for sun9i A80 apbs gates Chen-Yu Tsai
2015-04-30 16:10 ` [PATCH v2 2/5] clk: sunxi: support the cpus (cpu special) clock on the Allwinner A80 Chen-Yu Tsai
2015-05-04 12:51   ` Maxime Ripard
2015-05-04 15:22     ` Chen-Yu Tsai
2015-05-05  8:25       ` Maxime Ripard
2015-05-05 10:01         ` Chen-Yu Tsai
2015-05-05 12:02           ` Maxime Ripard
2015-04-30 16:10 ` [PATCH v2 3/5] mfd: sun6i-prcm: Add support for PRCM found on Allwinner A80 SoC Chen-Yu Tsai
2015-05-04 12:53   ` Maxime Ripard
2015-05-04 15:15     ` Chen-Yu Tsai
2015-04-30 16:10 ` Chen-Yu Tsai [this message]
2015-05-04 13:05   ` [PATCH v2 4/5] ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes Maxime Ripard
2015-05-04 15:25     ` Chen-Yu Tsai
2015-05-05  8:03       ` Maxime Ripard
2015-04-30 16:10 ` [PATCH v2 5/5] ARM: dts: sun9i: Add TODO comments for the main and low power clocks Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430410206-4410-5-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@linaro.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).