From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751976AbbEGSRS (ORCPT ); Thu, 7 May 2015 14:17:18 -0400 Received: from mail-wi0-f180.google.com ([209.85.212.180]:36439 "EHLO mail-wi0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751460AbbEGSRQ (ORCPT ); Thu, 7 May 2015 14:17:16 -0400 From: Peter Griffin To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, balbi@ti.com Cc: peter.griffin@linaro.org, lee.jones@linaro.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v3 3/6] usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example. Date: Thu, 7 May 2015 19:16:53 +0100 Message-Id: <1431022613-26018-1-git-send-email-peter.griffin@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org There is a subtle typo phys-names should be phy-names. Using the current example means you don't have working usb (as you fail to obtain the phys). Also update the example to use the generic phy type constants which are now used for miphy28. Additionally also remove the unnecessary new line in the example. Signed-off-by: Peter Griffin Acked-by: Rob Herring Acked-by: Maxime Coquelin --- Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index f9d7025..01c71b1 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -49,8 +49,7 @@ st_dwc3: dwc3@8f94000 { st,syscfg = <&syscfg_core>; resets = <&powerdown STIH407_USB3_POWERDOWN>, <&softreset STIH407_MIPHY2_SOFTRESET>; - reset-names = "powerdown", - "softreset"; + reset-names = "powerdown", "softreset"; #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; @@ -62,7 +61,7 @@ st_dwc3: dwc3@8f94000 { reg = <0x09900000 0x100000>; interrupts = ; dr_mode = "host"; - phys-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>; }; }; -- 1.9.1