From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v11 19/19] h8300: devicetree source
Date: Sat, 9 May 2015 00:04:39 +0900 [thread overview]
Message-ID: <1431097479-21101-20-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1431097479-21101-1-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
Documentation/devicetree/bindings/h8300/cpu.txt | 17 ++++
.../interrupt-controller/renesas,h8300h-intc.txt | 20 ++++
.../interrupt-controller/renesas,h8s-intc.txt | 20 ++++
arch/h8300/boot/dts/Makefile | 11 +++
arch/h8300/boot/dts/edosk2674.dts | 109 +++++++++++++++++++++
arch/h8300/boot/dts/h8300h_sim.dts | 95 ++++++++++++++++++
arch/h8300/boot/dts/h8s_sim.dts | 101 +++++++++++++++++++
7 files changed, 373 insertions(+)
create mode 100644 Documentation/devicetree/bindings/h8300/cpu.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
create mode 100644 arch/h8300/boot/dts/Makefile
create mode 100644 arch/h8300/boot/dts/edosk2674.dts
create mode 100644 arch/h8300/boot/dts/h8300h_sim.dts
create mode 100644 arch/h8300/boot/dts/h8s_sim.dts
diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt
new file mode 100644
index 0000000..f1287e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/h8300/cpu.txt
@@ -0,0 +1,17 @@
+* H8/300 CPU bindings
+
+Required properties:
+
+- compatible: Compatible property value should be "renesas,h8300".
+- reg: Contains CPU index.
+- clock-frequency: Contains the clock frequency for CPU, in Hz.
+- renesas,bus-width: Contain the memory bus width.
+
+Example:
+
+ cpu@0 {
+ compatible = "renesas,h8300";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ renesas,bus-width = <16>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
new file mode 100644
index 0000000..79053dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
@@ -0,0 +1,20 @@
+* H8/300H Interrupt controller
+
+Required properties:
+
+- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
+- #interrupt-cells: has to be <1>: an interrupt index and flags, as defined in
+ interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+ properties
+
+Example:
+
+ h8intc: intc@0 {
+ compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
new file mode 100644
index 0000000..1206191
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
@@ -0,0 +1,20 @@
+* H8S Interrupt controller
+
+Required properties:
+
+- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
+- #interrupt-cells: has to be <1>: an interrupt index and flags, as defined in
+ interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+ properties
+
+Example:
+
+ h8intc: intc@0 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
diff --git a/arch/h8300/boot/dts/Makefile b/arch/h8300/boot/dts/Makefile
new file mode 100644
index 0000000..bb123fa
--- /dev/null
+++ b/arch/h8300/boot/dts/Makefile
@@ -0,0 +1,11 @@
+ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_H8300_BUILTIN_DTB)).dtb.o
+endif
+
+obj-y += $(BUILTIN_DTB)
+
+dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
+dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
+dtb-$(CONFIG_EDOSK2674) := edosk2674.dtb
+
+clean-files := *.dtb.S
diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts
new file mode 100644
index 0000000..60e73b9
--- /dev/null
+++ b/arch/h8300/boot/dts/edosk2674.dts
@@ -0,0 +1,109 @@
+#include <dt-bindings/clock/renesas,8bit-timer.h>
+
+/dts-v1/;
+/ {
+ compatible = "renesas,edosk2674";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "console=ttySC2,38400";
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ serial2 = &sci2;
+ };
+
+ clocks {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "xtal";
+ };
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
+ cclk: cclk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&pllclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>;
+ renesas,width = <3>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cclk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x400000 0x800000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ reg = <0>;
+ renesas,bus-width = <16>;
+ clock-frequency = <33333333>;
+ bus-width = <16>;
+ };
+ };
+
+ h8intc: interrupt-controller@0 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ tpu: timer@ffffe0 {
+ compatible = "renesas,tpu";
+ reg = <0xffffe0 16>, <0xfffff0 12>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer8: timer@ffffb0 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffff80 10>;
+ interrupts = <72 75>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffff78 {
+ compatible = "renesas,sci";
+ reg = <0xffff78 8>;
+ interrupts = <88 89 90 91>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffff80 {
+ compatible = "renesas,sci";
+ reg = <0xffff80 8>;
+ interrupts = <92 93 94 95>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci2: serial@ffff88 {
+ compatible = "renesas,sci";
+ reg = <0xffff88 8>;
+ interrupts = <96 97 98 99>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
new file mode 100644
index 0000000..08c3e35
--- /dev/null
+++ b/arch/h8300/boot/dts/h8300h_sim.dts
@@ -0,0 +1,95 @@
+#include <dt-bindings/clock/renesas,8bit-timer.h>
+
+/dts-v1/;
+/ {
+ compatible = "gnu,gdbsim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "console=ttySC0";
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ clocks {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ clock-output-names = "xtal";
+ };
+ cclk: cclk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee01b 2>;
+ renesas,width = <2>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cclk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x400000 0x400000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ renesas,bus-width = <16>;
+ };
+ };
+
+ h8intc: interrupt-controller@0 {
+ compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ timer8: timer@ffff80 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffff80 10>;
+ interrupts = <36>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+ timer16: timer@ffff68 {
+ compatible = "renesas,16bit-timer";
+ reg = <0xffff68 8>, <0xffff60 8>;
+ interrupts = <24>;
+ renesas,channel = <0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffffb0 {
+ compatible = "renesas,sci";
+ reg = <0xffffb0 8>;
+ interrupts = <52 53 54 55>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffffb8 {
+ compatible = "renesas,sci";
+ reg = <0xffffb8 8>;
+ interrupts = <56 57 58 59>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
new file mode 100644
index 0000000..4f93eb6
--- /dev/null
+++ b/arch/h8300/boot/dts/h8s_sim.dts
@@ -0,0 +1,101 @@
+#include <dt-bindings/clock/renesas,8bit-timer.h>
+
+/dts-v1/;
+/ {
+ compatible = "gnu,gdbsim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "earlyprintk=h8300-sim console=ttySC0";
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ clocks {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "xtal";
+ };
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
+ cclk: cclk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&pllclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>;
+ renesas,width = <3>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cclk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x400000 0x800000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ reg = <0>;
+ renesas,bus-width = <16>;
+ clock-frequency = <33333333>;
+ bus-width = <16>;
+ };
+ };
+
+ h8intc: interrupt_controler@0 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ tpu: timer@ffffe0 {
+ compatible = "renesas,tpu";
+ reg = <0xffffe0 16>, <0xfffff0 12>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer8: timer@ffffb0 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffff80 10>;
+ interrupts = <72 75>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffff78 {
+ compatible = "renesas,sci";
+ reg = <0xffff78 8>;
+ interrupts = <88 89 90 91>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffff80 {
+ compatible = "renesas,sci";
+ reg = <0xffff80 8>;
+ interrupts = <92 93 94 95>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
--
2.1.4
next prev parent reply other threads:[~2015-05-08 15:05 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 15:04 [PATCH v11 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 01/19] MAINTAINERS: Add H8/300 entry Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 02/19] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 03/19] Add ELF machine Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 04/19] sh-sci: Add h8300 SCI Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 05/19] asm-generic: Add common asm-offsets.h Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-10 10:46 ` Richard Weinberger
2015-05-11 3:30 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 07/19] h8300: UAPI headers Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 08/19] h8300: Exception and Interrupt handling Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 09/19] h8300: kernel booting Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 10/19] h8300: Process and signal Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 12/19] h8300: miscellaneous functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 13/19] h8300: Memory management Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 14/19] h8300: library functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 15/19] h8300: Build scripts Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 16/19] h8300: configs Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 17/19] h8300: clock driver Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 18/19] h8300: clocksource Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato [this message]
2015-05-08 16:50 ` [PATCH v11 19/19] h8300: devicetree source Mark Rutland
2015-05-09 11:19 ` Yoshinori Sato
2015-05-08 18:54 ` [PATCH v11 00/19] Re-introduce h8300 architecture Guenter Roeck
2015-05-09 11:20 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431097479-21101-20-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=devicetree@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).