linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Barry Song <21cnbao@gmail.com>
To: ohad@wizery.com, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: workgroup.linux@csr.com, Wei Chen <wei.chen@csr.com>,
	Suman Anna <s-anna@ti.com>, Bjorn Andersson <bjorn@kryo.se>,
	Barry Song <Baohua.Song@csr.com>
Subject: [PATCH 1/3 v3] drivers: hwspinlock: add CSR atlas7 implementation
Date: Tue, 19 May 2015 06:41:36 +0000	[thread overview]
Message-ID: <1432017698-23725-1-git-send-email-21cnbao@gmail.com> (raw)

From: Wei Chen <wei.chen@csr.com>

Add hwspinlock support for the CSR atlas7 SoC.

The Hardware Spinlock device on atlas7 provides hardware assistance
for synchronization between the multiple processors in the system
(dual Cortex-A7, CAN bus Cortex-M3 and audio DSP).

Cc: Suman Anna <s-anna@ti.com>
Cc: Bjorn Andersson <bjorn@kryo.se>
Signed-off-by: Wei Chen <wei.chen@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
---
 -v3:
 use #hwlock-cells and general hwspinlock dt-binding;
 drop relax();
 drop num-spinlocks in dts;
 re-order Kconfig and Makefile;
 other codingstyle issues.
 Thanks Suman, Bjorn and Ohad

 drivers/hwspinlock/Kconfig           |  12 ++++
 drivers/hwspinlock/Makefile          |   1 +
 drivers/hwspinlock/sirf_hwspinlock.c | 135 +++++++++++++++++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 drivers/hwspinlock/sirf_hwspinlock.c

diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index b5b4f52..73a4016 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -30,6 +30,18 @@ config HWSPINLOCK_QCOM
 
 	  If unsure, say N.
 
+config HWSPINLOCK_SIRF
+	tristate "SIRF Hardware Spinlock device"
+	depends on ARCH_SIRF
+	select HWSPINLOCK
+	help
+	  Say y here to support the SIRF Hardware Spinlock device, which
+	  provides a synchronisation mechanism for the various processors
+	  on the SoC.
+
+	  It's safe to say n here if you're not interested in SIRF hardware
+	  spinlock or just want a bare minimum kernel.
+
 config HSEM_U8500
 	tristate "STE Hardware Semaphore functionality"
 	depends on ARCH_U8500
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index 68f95d9..6b59cb5a 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -5,4 +5,5 @@
 obj-$(CONFIG_HWSPINLOCK)		+= hwspinlock_core.o
 obj-$(CONFIG_HWSPINLOCK_OMAP)		+= omap_hwspinlock.o
 obj-$(CONFIG_HWSPINLOCK_QCOM)		+= qcom_hwspinlock.o
+obj-$(CONFIG_HWSPINLOCK_SIRF)		+= sirf_hwspinlock.o
 obj-$(CONFIG_HSEM_U8500)		+= u8500_hsem.o
diff --git a/drivers/hwspinlock/sirf_hwspinlock.c b/drivers/hwspinlock/sirf_hwspinlock.c
new file mode 100644
index 0000000..e7e5ba6
--- /dev/null
+++ b/drivers/hwspinlock/sirf_hwspinlock.c
@@ -0,0 +1,135 @@
+/*
+ * SIRF hardware spinlock driver
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "hwspinlock_internal.h"
+
+struct sirf_hwspinlock {
+	void __iomem *io_base;
+	struct hwspinlock_device bank;
+};
+
+/* Number of Hardware Spinlocks*/
+#define	HW_SPINLOCK_NUMBER	30
+
+/* Hardware spinlock register offsets */
+#define HW_SPINLOCK_BASE	0x404
+#define HW_SPINLOCK_OFFSET(x)	(HW_SPINLOCK_BASE + 0x4 * (x))
+
+static int sirf_hwspinlock_trylock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* attempt to acquire the lock by reading value == 1 from it */
+	return !!readl(lock_addr);
+}
+
+static void sirf_hwspinlock_unlock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* release the lock by writing 0 to it */
+	writel(0, lock_addr);
+}
+
+static const struct hwspinlock_ops sirf_hwspinlock_ops = {
+	.trylock = sirf_hwspinlock_trylock,
+	.unlock = sirf_hwspinlock_unlock,
+};
+
+static int sirf_hwspinlock_probe(struct platform_device *pdev)
+{
+	struct sirf_hwspinlock *hwspin;
+	struct hwspinlock *hwlock;
+	int idx, ret;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	hwspin = devm_kzalloc(&pdev->dev, sizeof(*hwspin) +
+			sizeof(*hwlock) * HW_SPINLOCK_NUMBER, GFP_KERNEL);
+	if (!hwspin)
+		return -ENOMEM;
+
+	/* retrieve io base */
+	hwspin->io_base = of_iomap(pdev->dev.of_node, 0);
+	if (!hwspin->io_base)
+		ret = -ENOMEM;
+
+	for (idx = 0; idx < HW_SPINLOCK_NUMBER; idx++) {
+		hwlock = &hwspin->bank.lock[idx];
+		hwlock->priv = hwspin->io_base + HW_SPINLOCK_OFFSET(idx);
+	}
+
+	platform_set_drvdata(pdev, hwspin);
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = hwspin_lock_register(&hwspin->bank, &pdev->dev,
+				&sirf_hwspinlock_ops, 0, HW_SPINLOCK_NUMBER);
+	if (ret)
+		goto reg_failed;
+
+	return 0;
+
+reg_failed:
+	pm_runtime_disable(&pdev->dev);
+	iounmap(hwspin->io_base);
+
+	return ret;
+}
+
+static int sirf_hwspinlock_remove(struct platform_device *pdev)
+{
+	struct sirf_hwspinlock *hwspin = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = hwspin_lock_unregister(&hwspin->bank);
+	if (ret) {
+		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	pm_runtime_disable(&pdev->dev);
+
+	iounmap(hwspin->io_base);
+
+	return 0;
+}
+
+static const struct of_device_id sirf_hwpinlock_ids[] = {
+	{ .compatible = "sirf,hwspinlock", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sirf_hwpinlock_ids);
+
+static struct platform_driver sirf_hwspinlock_driver = {
+	.probe = sirf_hwspinlock_probe,
+	.remove = sirf_hwspinlock_remove,
+	.driver = {
+		.name = "atlas7_hwspinlock",
+		.of_match_table = of_match_ptr(sirf_hwpinlock_ids),
+	},
+};
+
+module_platform_driver(sirf_hwspinlock_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SIRF Hardware spinlock driver");
+MODULE_AUTHOR("Wei Chen <wei.chen@csr.com>");
-- 
2.3.5


             reply	other threads:[~2015-05-19  6:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-19  6:41 Barry Song [this message]
2015-05-19  6:41 ` [PATCH 2/3 v3] Documentation: dt: add the CSR atlas7 hwspinlock bindings document Barry Song
2015-05-22 22:44   ` Suman Anna
2015-05-25  5:33     ` Barry Song
2015-05-26 17:02       ` Suman Anna
2015-05-19  6:41 ` [PATCH 3/3 v3] ARM: dts: atlas7: use general dt-binding for hwspinlock Barry Song
2015-05-22 22:51 ` [PATCH 1/3 v3] drivers: hwspinlock: add CSR atlas7 implementation Suman Anna
2015-05-25  5:37   ` Barry Song
2015-05-26 17:03     ` Suman Anna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432017698-23725-1-git-send-email-21cnbao@gmail.com \
    --to=21cnbao@gmail.com \
    --cc=Baohua.Song@csr.com \
    --cc=bjorn@kryo.se \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=s-anna@ti.com \
    --cc=wei.chen@csr.com \
    --cc=workgroup.linux@csr.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).