linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
To: Viresh Kumar <viresh.kumar@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	linaro-kernel@lists.linaro.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
Date: Thu,  9 Jul 2015 18:27:38 +0800	[thread overview]
Message-ID: <1436437661-17606-2-git-send-email-pi-cheng.chen@linaro.org> (raw)
In-Reply-To: <1436437661-17606-1-git-send-email-pi-cheng.chen@linaro.org>

This patch adds the clock and regulator consumer properties part of
document for CPU DVFS clocks on Mediatek MT8173 SoC.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
---
 .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt  | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt

diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
new file mode 100644
index 0000000..27b3521
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
@@ -0,0 +1,83 @@
+Device Tree Clock bindings for CPU DVFS clock of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+
+Example:
+--------
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
-- 
1.9.1


  reply	other threads:[~2015-07-09 10:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09 10:27 [PATCH v6 0/4] Add Mediatek MT8173 cpufreq driver Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen [this message]
2015-07-09 14:55   ` [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings Michael Turquette
2015-07-09 10:27 ` [PATCH v6 2/4] dt-bindings: mediatek: Add MT8173 cpufreq driver bindings Pi-Cheng Chen
2015-07-09 10:32   ` Viresh Kumar
2015-07-09 10:27 ` [PATCH v6 3/4] cpufreq: mediatek: Add MT8173 cpufreq driver Pi-Cheng Chen
2015-07-09 10:27 ` [PATCH v6 4/4] arm64: dts: mt8173: Add mt8173 cpufreq driver support Pi-Cheng Chen
2015-07-09 10:34 ` [PATCH v6 0/4] Add Mediatek MT8173 cpufreq driver Viresh Kumar
2015-08-02  7:27 ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436437661-17606-2-git-send-email-pi-cheng.chen@linaro.org \
    --to=pi-cheng.chen@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linaro-kernel@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).