[PATCH v2 00/48] usb: gadget: rework ep matching and claiming mechanism

[PATCH v2 00/48] usb: gadget: rework ep matching and claiming mechanism

[Robert Baldyga]

Hello,

This patch series reworks endpoint matching and claiming mechanism in
epautoconf. From v2 there are 11 additional patches adding 'ep_match'
to usb_gadget_ops and removing chip-specific quirk handling from generic
code of autoconfig.

I'm not sure if this patch set isn't too long, as it has 48 patches,
but I decided to send it as single series to avoid problems with patch
applying order.

The aim of whole patchset is to rework epautoconf code to get rid of
things like name-based endpoint matching and UDC name-based quirks in
generic code. These needed to do some modifications in framework like
adding 'endpoint capabilities flags' feature or adding 'match_ep'.

Following paragraphs contain brief description of what modifications are
done by particular parts of this patch set:

The patch (1) introduces new safer endpoint claiming method, basing on
new 'claimed' flag. It was discussed here [1]. I proposed this solution
over year ago and it was accepted, but apparently I forgot to send the
final version of patch.

Patches (2-3) add the 'capabilities flags' structure and helper macros.
This solution is inspired by the 'feature flags' originally proposed
by Felipe Balbi in 2013 [2], but unfortunately implementation of this
feature has never been completed.

Patches (4-36) add' capabilites flags' support to all UDC drivers present
in the kernel tree. It's needed to be done before replacing old endpoint
matching mechanism, otherwise UDC drivers which doesn't set 'capabilities
flags' won't work with new autoconfig.

Patch (37) finally replaces old endpoint matching method with the new
one basing on capabilities flags.

These changes aims to get rid of code, which guesses endpoint capabilities
basing on it's name, and introduce new better replacement. In result
we have better way to describe types and directions supported by each
endpoint.

For example the old name-based method didn't allow to have endpoint
supporing two types of transfers - there were only ability to support
one or all endpoint types. The 'capabilities flags' feature supply
precise, flexible and extendible mechanism of description of endpoint
hardware limitations, which is desired for proper endpoint matching.

Patch (38) removes chip-specific quirk from ep_matches() function.

Patches (39-40) remove code modifying endpoint and descriptor structures
from ep_matches() function and cleans it up to make it simpler and more
readable.

Patches (41-42) add 'match_ep' callback to usb_gadget_ops and make use
of it in epautoconf. This callback allows UDC drivers to supply
non-standard endpoint matching algorithms.

Patches (43-44) add usb_gadget_ep_match_desc() function which makes the
same thing as ep_matches(), but is located in udc-core where it's
available for UDC drivers, which can use it as helper function in
'match_ep' callback to avoid writing lots of repetitive code. Patch (44)
replaces all calls of ep_matches() with usb_gadget_ep_match_desc() and
removes the ep_matches() as a dead code.

Patches (45-47) move chip-specific enpoint matching algorithms from
generic code of usb_ep_autoconfig_ss() function to UDC controller drivers
using 'match_ep' callback.

Patch (48) makes final cleanup after whole operation.

[1] https://lkml.org/lkml/2014/6/16/94
[2] http://www.spinics.net/lists/linux-usb/msg99662.html

Best regards,
Robert Baldyga

Changelog:

v2:
- remove PXA quirk from ep_matches() function without behaviour change
  using ep capabilities flags
- separate ep and desc configuration code from ep_match() function
- add 'ep_match' to usb_gadget_ops and move chip-specific endpoint
  matching algorithms from generic code to UDC controller drivers

v1: https://lkml.org/lkml/2015/7/8/436

Robert Baldyga (48):
  usb: gadget: encapsulate endpoint claiming mechanism
  usb: gadget: add endpoint capabilities flags
  usb: gadget: add endpoint capabilities helper macros
  staging: emxx_udc: add ep capabilities support
  usb: chipidea: udc: add ep capabilities support
  usb: dwc2: gadget: add ep capabilities support
  usb: dwc3: gadget: add ep capabilities support
  usb: gadget: amd5536udc: add ep capabilities support
  usb: gadget: at91_udc: add ep capabilities support
  usb: gadget: bcm63xx_udc: add ep capabilities support
  usb: gadget: bdc: add ep capabilities support
  usb: gadget: dummy-hcd: add ep capabilities support
  usb: gadget: fotg210-udc: add ep capabilities support
  usb: gadget: fsl_qe_udc: add ep capabilities support
  usb: gadget: fsl_udc_core: add ep capabilities support
  usb: gadget: fusb300_udc: add ep capabilities support
  usb: gadget: goku_udc: add ep capabilities support
  usb: gadget: gr_udc: add ep capabilities support
  usb: gadget: lpc32xx_udc: add ep capabilities support
  usb: gadget: m66592-udc: add ep capabilities support
  usb: gadget: mv_u3d_core: add ep capabilities support
  usb: gadget: mv_udc_core: add ep capabilities support
  usb: gadget: net2272: add ep capabilities support
  usb: gadget: net2280: add ep capabilities support
  usb: gadget: omap_udc: add ep capabilities support
  usb: gadget: pch_ud: add ep capabilities support
  usb: gadget: pxa25x_udc: add ep capabilities support
  usb: gadget: pxa27x_udc: add ep capabilities support
  usb: gadget: r8a66597-udc: add ep capabilities support
  usb: gadget: s3c-hsudc: add ep capabilities support
  usb: gadget: s3c2410_udc: add ep capabilities support
  usb: gadget: udc-xilinx: add ep capabilities support
  usb: isp1760: udc: add ep capabilities support
  usb: musb: gadget: add ep capabilities support
  usb: renesas: gadget: add ep capabilities support
  usb: gadget: atmel_usba_udc: add ep capabilities support
  usb: gadget: epautoconf: add endpoint capabilities flags verification
  usb: gadget: epautoconf: remove pxa quirk from ep_matches()
  usb: gadget: epautoconf: remove ep and desc configuration from
    ep_matches()
  usb: gadget: epautoconf: rework ep_matches() function
  usb: gadget: add 'ep_match' callback to usb_gadget_ops
  usb: gadget: epautoconf: use 'ep_match' gadget callback
  usb: gadget: udc: add usb_gadget_ep_match_desc() function
  usb: gadget: epautoconf: remove ep_matches() function
  usb: gadget: net2280: add net2280_match_ep() function
  usb: gadget: goku_udc: add goku_match_ep() function
  usb: musb: gadget: add musb_match_ep() function
  usb: gadget: epautoconf: cleanup dead code

 drivers/staging/emxx_udc/emxx_udc.c     |  60 ++++---
 drivers/usb/chipidea/udc.c              |  14 ++
 drivers/usb/dwc2/gadget.c               |  13 ++
 drivers/usb/dwc3/gadget.c               |  13 ++
 drivers/usb/gadget/epautoconf.c         | 282 +++++---------------------------
 drivers/usb/gadget/udc/amd5536udc.c     |  57 +++++--
 drivers/usb/gadget/udc/at91_udc.c       |  33 +++-
 drivers/usb/gadget/udc/atmel_usba_udc.c |  11 ++
 drivers/usb/gadget/udc/bcm63xx_udc.c    |  25 ++-
 drivers/usb/gadget/udc/bdc/bdc_ep.c     |   9 +
 drivers/usb/gadget/udc/dummy_hcd.c      |  65 ++++++--
 drivers/usb/gadget/udc/fotg210-udc.c    |  11 ++
 drivers/usb/gadget/udc/fsl_qe_udc.c     |  11 ++
 drivers/usb/gadget/udc/fsl_udc_core.c   |  13 ++
 drivers/usb/gadget/udc/fusb300_udc.c    |  11 ++
 drivers/usb/gadget/udc/goku_udc.c       |  33 ++++
 drivers/usb/gadget/udc/gr_udc.c         |  11 ++
 drivers/usb/gadget/udc/lpc32xx_udc.c    |  32 ++++
 drivers/usb/gadget/udc/m66592-udc.c     |  11 ++
 drivers/usb/gadget/udc/mv_u3d_core.c    |   9 +
 drivers/usb/gadget/udc/mv_udc_core.c    |   9 +
 drivers/usb/gadget/udc/net2272.c        |  11 ++
 drivers/usb/gadget/udc/net2280.c        |  94 +++++++++--
 drivers/usb/gadget/udc/omap_udc.c       |  22 +++
 drivers/usb/gadget/udc/pch_udc.c        |  14 +-
 drivers/usb/gadget/udc/pxa25x_udc.c     |  29 ++++
 drivers/usb/gadget/udc/pxa27x_udc.h     |  33 ++--
 drivers/usb/gadget/udc/r8a66597-udc.c   |  10 ++
 drivers/usb/gadget/udc/s3c-hsudc.c      |  15 ++
 drivers/usb/gadget/udc/s3c2410_udc.c    |  10 ++
 drivers/usb/gadget/udc/udc-core.c       |  69 ++++++++
 drivers/usb/gadget/udc/udc-xilinx.c     |   9 +
 drivers/usb/isp1760/isp1760-udc.c       |  11 ++
 drivers/usb/musb/musb_gadget.c          |  56 +++++++
 drivers/usb/renesas_usbhs/mod_gadget.c  |   6 +
 include/linux/usb/gadget.h              |  53 ++++++
 36 files changed, 838 insertions(+), 337 deletions(-)

-- 
1.9.1

[PATCH v2 01/48] usb: gadget: encapsulate endpoint claiming mechanism

[Robert Baldyga]

So far it was necessary for usb functions to set ep->driver_data in
endpoint obtained from autoconfig to non-null value, to indicate that
endpoint is claimed by function (in autoconfig it was checked if endpoint
has set this field to non-null value, and if it has, it was assumed that
it is claimed). It could cause bugs becouse if some function doesn't
set this field autoconfig could return the same endpoint more than one
time.

To help to avoid such bugs this patch adds claimed flag to struct usb_ep,
and  encapsulates endpoint claiming mechanism inside usb_ep_autoconfig_ss()
and usb_ep_autoconfig_reset(), so now usb functions doesn't need to perform
any additional actions to mark endpoint obtained from autoconfig as claimed.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 11 ++++++-----
 include/linux/usb/gadget.h      |  1 +
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 919cdfd..8e00ca7 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -53,7 +53,7 @@ ep_matches (
 	int		num_req_streams = 0;
 
 	/* endpoint already claimed? */
-	if (NULL != ep->driver_data)
+	if (ep->claimed)
 		return 0;
 
 	/* only support ep0 for portable CONTROL traffic */
@@ -240,7 +240,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
  * updated with the assigned number of streams if it is
  * different from the original value. To prevent the endpoint
  * from being returned by a later autoconfig call, claim it by
- * assigning ep->driver_data to some non-null value.
+ * assigning ep->claimed to true.
  *
  * On failure, this returns a null endpoint descriptor.
  */
@@ -323,6 +323,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
 found_ep:
 	ep->desc = NULL;
 	ep->comp_desc = NULL;
+	ep->claimed = true;
 	return ep;
 }
 EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
@@ -354,7 +355,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
  * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
  * is initialized as if the endpoint were used at full speed.  To prevent
  * the endpoint from being returned by a later autoconfig call, claim it
- * by assigning ep->driver_data to some non-null value.
+ * by assigning ep->claimed to true.
  *
  * On failure, this returns a null endpoint descriptor.
  */
@@ -373,7 +374,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
  *
  * Use this for devices where one configuration may need to assign
  * endpoint resources very differently from the next one.  It clears
- * state such as ep->driver_data and the record of assigned endpoints
+ * state such as ep->claimed and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
 void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
@@ -381,7 +382,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 	struct usb_ep	*ep;
 
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		ep->driver_data = NULL;
+		ep->claimed = false;
 	}
 	gadget->in_epnum = 0;
 	gadget->out_epnum = 0;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 4f3dfb7..fcb0a4e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -173,6 +173,7 @@ struct usb_ep {
 	const char		*name;
 	const struct usb_ep_ops	*ops;
 	struct list_head	ep_list;
+	bool			claimed;
 	unsigned		maxpacket:16;
 	unsigned		maxpacket_limit:16;
 	unsigned		max_streams:16;
-- 
1.9.1

[PATCH v2 02/48] usb: gadget: add endpoint capabilities flags

[Robert Baldyga]

Introduce struct usb_ep_caps which contains information about capabilities
of usb endpoints - supported transfer types and directions. This structure
should be filled by UDC driver for each of its endpoints, and will be
used in epautoconf in new ep matching mechanism which will replace ugly
guessing of endpoint capabilities basing on its name.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 include/linux/usb/gadget.h | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index fcb0a4e..6f3e0fb 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -141,10 +141,29 @@ struct usb_ep_ops {
 };
 
 /**
+ * struct usb_ep_caps - endpoint capabilities description
+ * @type_control:Endpoint supports control type (reserved for ep0).
+ * @type_iso:Endpoint supports isochronous transfers.
+ * @type_bulk:Endpoint supports bulk transfers.
+ * @type_int:Endpoint supports interrupt transfers.
+ * @dir_in:Endpoint supports IN direction.
+ * @dir_out:Endpoint supports OUT direction.
+ */
+struct usb_ep_caps {
+	unsigned type_control:1;
+	unsigned type_iso:1;
+	unsigned type_bulk:1;
+	unsigned type_int:1;
+	unsigned dir_in:1;
+	unsigned dir_out:1;
+};
+
+/**
  * struct usb_ep - device side representation of USB endpoint
  * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
  * @ops: Function pointers used to access hardware-specific operations.
  * @ep_list:the gadget's ep_list holds all of its endpoints
+ * @caps:The structure describing types and directions supported by endoint.
  * @maxpacket:The maximum packet size used on this endpoint.  The initial
  *	value can sometimes be reduced (hardware allowing), according to
  *      the endpoint descriptor used to configure the endpoint.
@@ -167,12 +186,14 @@ struct usb_ep_ops {
  * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
  * and is accessed only in response to a driver setup() callback.
  */
+
 struct usb_ep {
 	void			*driver_data;
 
 	const char		*name;
 	const struct usb_ep_ops	*ops;
 	struct list_head	ep_list;
+	struct usb_ep_caps	caps;
 	bool			claimed;
 	unsigned		maxpacket:16;
 	unsigned		maxpacket_limit:16;
-- 
1.9.1

[PATCH v2 03/48] usb: gadget: add endpoint capabilities helper macros

[Robert Baldyga]

Add macros useful while initializing array of endpoint capabilities
structures. These macros makes structure initialization more compact
to decrease number of code lines and increase readability of code.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 include/linux/usb/gadget.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 6f3e0fb..e6cbc25 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -158,6 +158,26 @@ struct usb_ep_caps {
 	unsigned dir_out:1;
 };
 
+#define USB_EP_CAPS_TYPE_CONTROL     0x01
+#define USB_EP_CAPS_TYPE_ISO         0x02
+#define USB_EP_CAPS_TYPE_BULK        0x04
+#define USB_EP_CAPS_TYPE_INT         0x08
+#define USB_EP_CAPS_TYPE_ALL \
+	(USB_EP_CAPS_TYPE_ISO | USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
+#define USB_EP_CAPS_DIR_IN           0x01
+#define USB_EP_CAPS_DIR_OUT          0x02
+#define USB_EP_CAPS_DIR_ALL  (USB_EP_CAPS_DIR_IN | USB_EP_CAPS_DIR_OUT)
+
+#define USB_EP_CAPS(_type, _dir) \
+	{ \
+		.type_control = !!(_type & USB_EP_CAPS_TYPE_CONTROL), \
+		.type_iso = !!(_type & USB_EP_CAPS_TYPE_ISO), \
+		.type_bulk = !!(_type & USB_EP_CAPS_TYPE_BULK), \
+		.type_int = !!(_type & USB_EP_CAPS_TYPE_INT), \
+		.dir_in = !!(_dir & USB_EP_CAPS_DIR_IN), \
+		.dir_out = !!(_dir & USB_EP_CAPS_DIR_OUT), \
+	}
+
 /**
  * struct usb_ep - device side representation of USB endpoint
  * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
-- 
1.9.1

[PATCH v2 04/48] staging: emxx_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Fixed typo in "epc-nulk" to "epc-bulk".

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/staging/emxx_udc/emxx_udc.c | 60 ++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 31 deletions(-)

diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index 3b7aa36..0d64bee 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -3153,36 +3153,33 @@ static const struct usb_gadget_ops nbu2ss_gadget_ops = {
 	.ioctl			= nbu2ss_gad_ioctl,
 };
 
-static const char g_ep0_name[] = "ep0";
-static const char g_ep1_name[] = "ep1-bulk";
-static const char g_ep2_name[] = "ep2-bulk";
-static const char g_ep3_name[] = "ep3in-int";
-static const char g_ep4_name[] = "ep4-iso";
-static const char g_ep5_name[] = "ep5-iso";
-static const char g_ep6_name[] = "ep6-bulk";
-static const char g_ep7_name[] = "ep7-bulk";
-static const char g_ep8_name[] = "ep8in-int";
-static const char g_ep9_name[] = "ep9-iso";
-static const char g_epa_name[] = "epa-iso";
-static const char g_epb_name[] = "epb-bulk";
-static const char g_epc_name[] = "epc-nulk";
-static const char g_epd_name[] = "epdin-int";
-
-static const char *gp_ep_name[NUM_ENDPOINTS] = {
-	g_ep0_name,
-	g_ep1_name,
-	g_ep2_name,
-	g_ep3_name,
-	g_ep4_name,
-	g_ep5_name,
-	g_ep6_name,
-	g_ep7_name,
-	g_ep8_name,
-	g_ep9_name,
-	g_epa_name,
-	g_epb_name,
-	g_epc_name,
-	g_epd_name,
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[NUM_ENDPOINTS] = {
+#define EP_INFO(_name, _type, _dir) \
+	{ \
+		.name = _name, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+				USB_EP_CAPS_DIR_ ## _dir), \
+	}
+
+	EP_INFO("ep0",		CONTROL, ALL),
+	EP_INFO("ep1-bulk",	BULK,	ALL),
+	EP_INFO("ep2-bulk",	BULK,	ALL),
+	EP_INFO("ep3in-int",	INT,	IN),
+	EP_INFO("ep4-iso",	INT,	ALL),
+	EP_INFO("ep5-iso",	ISO,	ALL),
+	EP_INFO("ep6-bulk",	ISO,	ALL),
+	EP_INFO("ep7-bulk",	BULK,	ALL),
+	EP_INFO("ep8in-int",	INT,	IN),
+	EP_INFO("ep9-iso",	ISO,	ALL),
+	EP_INFO("epa-iso",	ISO,	ALL),
+	EP_INFO("epb-bulk",	BULK,	ALL),
+	EP_INFO("epc-bulk",	BULK,	ALL),
+	EP_INFO("epdin-int",	INT,	IN),
+
+#undef EP_INFO
 };
 
 /*-------------------------------------------------------------------------*/
@@ -3200,7 +3197,8 @@ static void __init nbu2ss_drv_ep_init(struct nbu2ss_udc *udc)
 		ep->desc = NULL;
 
 		ep->ep.driver_data = NULL;
-		ep->ep.name = gp_ep_name[i];
+		ep->ep.name = ep_info[i].name;
+		ep->ep.caps = ep_info[i].caps;
 		ep->ep.ops = &nbu2ss_ep_ops;
 
 		usb_ep_set_maxpacket_limit(&ep->ep,
-- 
1.9.1

[PATCH v2 05/48] usb: chipidea: udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/chipidea/udc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 764f668..eff7cfb 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1624,6 +1624,20 @@ static int init_eps(struct ci_hdrc *ci)
 
 			hwep->ep.name      = hwep->name;
 			hwep->ep.ops       = &usb_ep_ops;
+
+			if (i == 0) {
+				hwep->ep.caps.type_control = true;
+			} else {
+				hwep->ep.caps.type_iso = true;
+				hwep->ep.caps.type_bulk = true;
+				hwep->ep.caps.type_int = true;
+			}
+
+			if (j == TX)
+				hwep->ep.caps.dir_in = true;
+			else
+				hwep->ep.caps.dir_out = true;
+
 			/*
 			 * for ep0: maxP defined in desc, for other
 			 * eps, maxP is set by epautoconfig() called
-- 
1.9.1

[PATCH v2 06/48] usb: dwc2: gadget: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/dwc2/gadget.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4d47b7c..8771b66 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3289,6 +3289,19 @@ static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg,
 	usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
+	if (epnum == 0) {
+		hs_ep->ep.caps.type_control = true;
+	} else {
+		hs_ep->ep.caps.type_iso = true;
+		hs_ep->ep.caps.type_bulk = true;
+		hs_ep->ep.caps.type_int = true;
+	}
+
+	if (dir_in)
+		hs_ep->ep.caps.dir_in = true;
+	else
+		hs_ep->ep.caps.dir_out = true;
+
 	/*
 	 * if we're using dma, we need to set the next-endpoint pointer
 	 * to be something valid.
-- 
1.9.1

[PATCH v2 07/48] usb: dwc3: gadget: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/dwc3/gadget.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 333a7c0..8d1f768 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1713,6 +1713,19 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 				return ret;
 		}
 
+		if (epnum == 0) {
+			dep->endpoint.caps.type_control = true;
+		} else {
+			dep->endpoint.caps.type_iso = true;
+			dep->endpoint.caps.type_bulk = true;
+			dep->endpoint.caps.type_int = true;
+		}
+
+		if (epnum & 1)
+			dep->endpoint.caps.dir_in = true;
+		else
+			dep->endpoint.caps.dir_out = true;
+
 		INIT_LIST_HEAD(&dep->request_list);
 		INIT_LIST_HEAD(&dep->req_queued);
 	}
-- 
1.9.1

[PATCH v2 08/48] usb: gadget: amd5536udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/amd5536udc.c | 57 ++++++++++++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index de7e5e2..1a1d91c 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -138,15 +138,51 @@ static DECLARE_TASKLET(disconnect_tasklet, udc_tasklet_disconnect,
 
 /* endpoint names used for print */
 static const char ep0_string[] = "ep0in";
-static const char *const ep_string[] = {
-	ep0_string,
-	"ep1in-int", "ep2in-bulk", "ep3in-bulk", "ep4in-bulk", "ep5in-bulk",
-	"ep6in-bulk", "ep7in-bulk", "ep8in-bulk", "ep9in-bulk", "ep10in-bulk",
-	"ep11in-bulk", "ep12in-bulk", "ep13in-bulk", "ep14in-bulk",
-	"ep15in-bulk", "ep0out", "ep1out-bulk", "ep2out-bulk", "ep3out-bulk",
-	"ep4out-bulk", "ep5out-bulk", "ep6out-bulk", "ep7out-bulk",
-	"ep8out-bulk", "ep9out-bulk", "ep10out-bulk", "ep11out-bulk",
-	"ep12out-bulk", "ep13out-bulk", "ep14out-bulk", "ep15out-bulk"
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+	{ \
+		.name = _name, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+				USB_EP_CAPS_DIR_ ## _dir), \
+	}
+
+	EP_INFO(ep0_string,	CONTROL, IN),
+	EP_INFO("ep1in-int",	BULK,	IN),
+	EP_INFO("ep2in-bulk",	BULK,	IN),
+	EP_INFO("ep3in-bulk",	BULK,	IN),
+	EP_INFO("ep4in-bulk",	BULK,	IN),
+	EP_INFO("ep5in-bulk",	BULK,	IN),
+	EP_INFO("ep6in-bulk",	BULK,	IN),
+	EP_INFO("ep7in-bulk",	BULK,	IN),
+	EP_INFO("ep8in-bulk",	BULK,	IN),
+	EP_INFO("ep9in-bulk",	BULK,	IN),
+	EP_INFO("ep10in-bulk",	BULK,	IN),
+	EP_INFO("ep11in-bulk",	BULK,	IN),
+	EP_INFO("ep12in-bulk",	BULK,	IN),
+	EP_INFO("ep13in-bulk",	BULK,	IN),
+	EP_INFO("ep14in-bulk",	BULK,	IN),
+	EP_INFO("ep15in-bulk",	BULK,	IN),
+	EP_INFO("ep0out",	CONTROL, OUT),
+	EP_INFO("ep1out-bulk",	BULK,	OUT),
+	EP_INFO("ep2out-bulk",	BULK,	OUT),
+	EP_INFO("ep3out-bulk",	BULK,	OUT),
+	EP_INFO("ep4out-bulk",	BULK,	OUT),
+	EP_INFO("ep5out-bulk",	BULK,	OUT),
+	EP_INFO("ep6out-bulk",	BULK,	OUT),
+	EP_INFO("ep7out-bulk",	BULK,	OUT),
+	EP_INFO("ep8out-bulk",	BULK,	OUT),
+	EP_INFO("ep9out-bulk",	BULK,	OUT),
+	EP_INFO("ep10out-bulk",	BULK,	OUT),
+	EP_INFO("ep11out-bulk",	BULK,	OUT),
+	EP_INFO("ep12out-bulk",	BULK,	OUT),
+	EP_INFO("ep13out-bulk",	BULK,	OUT),
+	EP_INFO("ep14out-bulk",	BULK,	OUT),
+	EP_INFO("ep15out-bulk",	BULK,	OUT),
+
+#undef EP_INFO
 };
 
 /* DMA usage flag */
@@ -1517,7 +1553,8 @@ static void udc_setup_endpoints(struct udc *dev)
 	for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
 		ep = &dev->ep[tmp];
 		ep->dev = dev;
-		ep->ep.name = ep_string[tmp];
+		ep->ep.name = ep_info[tmp].name;
+		ep->ep.caps = ep_info[tmp].caps;
 		ep->num = tmp;
 		/* txfifo size is calculated at enable time */
 		ep->txfifo = dev->txfifo;
-- 
1.9.1

[PATCH v2 09/48] usb: gadget: at91_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/at91_udc.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index fc42264..a04b073 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -59,15 +59,29 @@
 #define	DRIVER_VERSION	"3 May 2006"
 
 static const char driver_name [] = "at91_udc";
-static const char * const ep_names[] = {
-	"ep0",
-	"ep1",
-	"ep2",
-	"ep3-int",
-	"ep4",
-	"ep5",
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+	{ \
+		.name = _name, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+				USB_EP_CAPS_DIR_ ## _dir), \
+	}
+
+	EP_INFO("ep0",		CONTROL, ALL),
+	EP_INFO("ep1",		ALL,	ALL),
+	EP_INFO("ep2",		ALL,	ALL),
+	EP_INFO("ep3-int",	INT,	ALL),
+	EP_INFO("ep4",		ALL,	ALL),
+	EP_INFO("ep5",		ALL,	ALL),
+
+#undef EP_INFO
 };
-#define ep0name		ep_names[0]
+
+#define ep0name		ep_info[0].name
 
 #define VBUS_POLL_TIMEOUT	msecs_to_jiffies(1000)
 
@@ -1830,7 +1844,8 @@ static int at91udc_probe(struct platform_device *pdev)
 
 	for (i = 0; i < NUM_ENDPOINTS; i++) {
 		ep = &udc->ep[i];
-		ep->ep.name = ep_names[i];
+		ep->ep.name = ep_info[i].name;
+		ep->ep.caps = ep_info[i].caps;
 		ep->ep.ops = &at91_ep_ops;
 		ep->udc = udc;
 		ep->int_mask = BIT(i);
-- 
1.9.1

[PATCH v2 10/48] usb: gadget: bcm63xx_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/bcm63xx_udc.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index 9db968b..c5e0894 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -44,9 +44,25 @@
 #define DRV_MODULE_NAME		"bcm63xx_udc"
 
 static const char bcm63xx_ep0name[] = "ep0";
-static const char *const bcm63xx_ep_name[] = {
-	bcm63xx_ep0name,
-	"ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int",
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} bcm63xx_ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+	{ \
+		.name = _name, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+				USB_EP_CAPS_DIR_ ## _dir), \
+	}
+
+	EP_INFO(bcm63xx_ep0name, CONTROL, ALL),
+	EP_INFO("ep1in-bulk",	BULK,	IN),
+	EP_INFO("ep2out-bulk",	BULK,	OUT),
+	EP_INFO("ep3in-int",	INT,	IN),
+	EP_INFO("ep4out-int",	INT,	OUT),
+
+#undef EP_INFO
 };
 
 static bool use_fullspeed;
@@ -943,7 +959,8 @@ static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
 	for (i = 0; i < BCM63XX_NUM_EP; i++) {
 		struct bcm63xx_ep *bep = &udc->bep[i];
 
-		bep->ep.name = bcm63xx_ep_name[i];
+		bep->ep.name = bcm63xx_ep_info[i].name;
+		bep->ep.caps = bcm63xx_ep_info[i].caps;
 		bep->ep_num = i;
 		bep->ep.ops = &bcm63xx_udc_ep_ops;
 		list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
-- 
1.9.1

[PATCH v2 11/48] usb: gadget: bdc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/bdc/bdc_ep.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index b04980c..f9a8f57 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -1952,12 +1952,18 @@ static int init_ep(struct bdc *bdc, u32 epnum, u32 dir)
 	ep->bdc = bdc;
 	ep->dir = dir;
 
+	if (dir)
+		ep->usb_ep.caps.dir_in = true;
+	else
+		ep->usb_ep.caps.dir_out = true;
+
 	/* ep->ep_num is the index inside bdc_ep */
 	if (epnum == 1) {
 		ep->ep_num = 1;
 		bdc->bdc_ep_array[ep->ep_num] = ep;
 		snprintf(ep->name, sizeof(ep->name), "ep%d", epnum - 1);
 		usb_ep_set_maxpacket_limit(&ep->usb_ep, EP0_MAX_PKT_SIZE);
+		ep->usb_ep.caps.type_control = true;
 		ep->comp_desc = NULL;
 		bdc->gadget.ep0 = &ep->usb_ep;
 	} else {
@@ -1971,6 +1977,9 @@ static int init_ep(struct bdc *bdc, u32 epnum, u32 dir)
 			 dir & 1 ? "in" : "out");
 
 		usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024);
+		ep->usb_ep.caps.type_iso = true;
+		ep->usb_ep.caps.type_bulk = true;
+		ep->usb_ep.caps.type_int = true;
 		ep->usb_ep.max_streams = 0;
 		list_add_tail(&ep->usb_ep.ep_list, &bdc->gadget.ep_list);
 	}
-- 
1.9.1

[PATCH v2 12/48] usb: gadget: dummy-hcd: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/dummy_hcd.c | 65 +++++++++++++++++++++++++++++---------
 1 file changed, 50 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 181112c..69fd29a 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -127,23 +127,57 @@ static inline struct dummy_request *usb_request_to_dummy_request
 
 static const char ep0name[] = "ep0";
 
-static const char *const ep_name[] = {
-	ep0name,				/* everyone has ep0 */
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+	{ \
+		.name = _name, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+				USB_EP_CAPS_DIR_ ## _dir), \
+	}
 
+	/* everyone has ep0 */
+	EP_INFO(ep0name,	CONTROL, ALL),
 	/* act like a pxa250: fifteen fixed function endpoints */
-	"ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
-	"ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
-	"ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
-		"ep15in-int",
-
+	EP_INFO("ep1in-bulk",	BULK,	IN),
+	EP_INFO("ep2out-bulk",	BULK,	OUT),
+	EP_INFO("ep3in-iso",	ISO,	IN),
+	EP_INFO("ep4out-iso",	ISO,	OUT),
+	EP_INFO("ep5in-int",	INT,	IN),
+	EP_INFO("ep6in-bulk",	BULK,	IN),
+	EP_INFO("ep7out-bulk",	BULK,	OUT),
+	EP_INFO("ep8in-iso",	ISO,	IN),
+	EP_INFO("ep9out-iso",	ISO,	OUT),
+	EP_INFO("ep10in-int",	INT,	IN),
+	EP_INFO("ep11in-bulk",	BULK,	IN),
+	EP_INFO("ep12out-bulk",	BULK,	OUT),
+	EP_INFO("ep13in-iso",	ISO,	IN),
+	EP_INFO("ep14out-iso",	ISO,	OUT),
+	EP_INFO("ep15in-int",	INT,	IN),
 	/* or like sa1100: two fixed function endpoints */
-	"ep1out-bulk", "ep2in-bulk",
-
+	EP_INFO("ep1out-bulk",	BULK,	OUT),
+	EP_INFO("ep2in-bulk",	BULK,	IN),
 	/* and now some generic EPs so we have enough in multi config */
-	"ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
-	"ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
+	EP_INFO("ep3out",	ALL,	OUT),
+	EP_INFO("ep4in",	ALL,	IN),
+	EP_INFO("ep5out",	ALL,	OUT),
+	EP_INFO("ep6out",	ALL,	OUT),
+	EP_INFO("ep7in",	ALL,	IN),
+	EP_INFO("ep8out",	ALL,	OUT),
+	EP_INFO("ep9in",	ALL,	IN),
+	EP_INFO("ep10out",	ALL,	OUT),
+	EP_INFO("ep11out",	ALL,	OUT),
+	EP_INFO("ep12in",	ALL,	IN),
+	EP_INFO("ep13out",	ALL,	OUT),
+	EP_INFO("ep14in",	ALL,	IN),
+	EP_INFO("ep15out",	ALL,	OUT),
+
+#undef EP_INFO
 };
-#define DUMMY_ENDPOINTS	ARRAY_SIZE(ep_name)
+
+#define DUMMY_ENDPOINTS	ARRAY_SIZE(ep_info)
 
 /*-------------------------------------------------------------------------*/
 
@@ -938,9 +972,10 @@ static void init_dummy_udc_hw(struct dummy *dum)
 	for (i = 0; i < DUMMY_ENDPOINTS; i++) {
 		struct dummy_ep	*ep = &dum->ep[i];
 
-		if (!ep_name[i])
+		if (!ep_info[i].name)
 			break;
-		ep->ep.name = ep_name[i];
+		ep->ep.name = ep_info[i].name;
+		ep->ep.caps = ep_info[i].caps;
 		ep->ep.ops = &dummy_ep_ops;
 		list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
 		ep->halted = ep->wedged = ep->already_seen =
@@ -1684,7 +1719,7 @@ static void dummy_timer(unsigned long _dum_hcd)
 	}
 
 	for (i = 0; i < DUMMY_ENDPOINTS; i++) {
-		if (!ep_name[i])
+		if (!ep_info[i].name)
 			break;
 		dum->ep[i].already_seen = 0;
 	}
-- 
1.9.1

[PATCH v2 13/48] usb: gadget: fotg210-udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/fotg210-udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index e547ea7..960c70c 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -1153,6 +1153,17 @@ static int fotg210_udc_probe(struct platform_device *pdev)
 		ep->ep.name = fotg210_ep_name[i];
 		ep->ep.ops = &fotg210_ep_ops;
 		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
 	}
 	usb_ep_set_maxpacket_limit(&fotg210->ep[0]->ep, 0x40);
 	fotg210->gadget.ep0 = &fotg210->ep[0]->ep;
-- 
1.9.1

[PATCH v2 14/48] usb: gadget: fsl_qe_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/fsl_qe_udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index e0822f1..5fb6f8b 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -2417,6 +2417,17 @@ static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
 	strcpy(ep->name, ep_name[pipe_num]);
 	ep->ep.name = ep_name[pipe_num];
 
+	if (pipe_num == 0) {
+		ep->ep.caps.type_control = true;
+	} else {
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+	}
+
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
+
 	ep->ep.ops = &qe_ep_ops;
 	ep->stopped = 1;
 	usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
-- 
1.9.1

[PATCH v2 15/48] usb: gadget: fsl_udc_core: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/fsl_udc_core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index c60022b..aab5221 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2313,6 +2313,19 @@ static int struct_ep_setup(struct fsl_udc *udc, unsigned char index,
 	ep->ep.ops = &fsl_ep_ops;
 	ep->stopped = 0;
 
+	if (index == 0) {
+		ep->ep.caps.type_control = true;
+	} else {
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+	}
+
+	if (index & 1)
+		ep->ep.caps.dir_in = true;
+	else
+		ep->ep.caps.dir_out = true;
+
 	/* for ep0: maxP defined in desc
 	 * for other eps, maxP is set by epautoconfig() called by gadget layer
 	 */
-- 
1.9.1

[PATCH v2 16/48] usb: gadget: fusb300_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/fusb300_udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 3970f45..948845c 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1450,6 +1450,17 @@ static int fusb300_probe(struct platform_device *pdev)
 		ep->ep.name = fusb300_ep_name[i];
 		ep->ep.ops = &fusb300_ep_ops;
 		usb_ep_set_maxpacket_limit(&ep->ep, HS_BULK_MAX_PACKET_SIZE);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
 	}
 	usb_ep_set_maxpacket_limit(&fusb300->ep[0]->ep, HS_CTL_MAX_PACKET_SIZE);
 	fusb300->ep[0]->epnum = 0;
-- 
1.9.1

[PATCH v2 17/48] usb: gadget: goku_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/goku_udc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 9e8d842..46b8d14 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1257,6 +1257,14 @@ static void udc_reinit (struct goku_udc *dev)
 		INIT_LIST_HEAD (&ep->queue);
 
 		ep_reset(NULL, ep);
+
+		if (i == 0)
+			ep->ep.caps.type_control = true;
+		else
+			ep->ep.caps.type_bulk = true;
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
 	}
 
 	dev->ep[0].reg_mode = NULL;
-- 
1.9.1

[PATCH v2 18/48] usb: gadget: gr_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/gr_udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index c886887..8aa2593 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2018,12 +2018,23 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
 
 		usb_ep_set_maxpacket_limit(&ep->ep, MAX_CTRL_PL_SIZE);
 		ep->bytes_per_buffer = MAX_CTRL_PL_SIZE;
+
+		ep->ep.caps.type_control = true;
 	} else {
 		usb_ep_set_maxpacket_limit(&ep->ep, (u16)maxplimit);
 		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
 	}
 	list_add_tail(&ep->ep_list, &dev->ep_list);
 
+	if (is_in)
+		ep->ep.caps.dir_in = true;
+	else
+		ep->ep.caps.dir_out = true;
+
 	ep->tailbuf = dma_alloc_coherent(dev->dev, ep->ep.maxpacket_limit,
 					 &ep->tailbuf_paddr, GFP_ATOMIC);
 	if (!ep->tailbuf)
-- 
1.9.1

[PATCH v2 19/48] usb: gadget: lpc32xx_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 3b6a785..00b5006 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -2575,6 +2575,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep0",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 0,
@@ -2586,6 +2588,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep1-int",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 2,
@@ -2597,6 +2601,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep2-bulk",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 4,
@@ -2608,6 +2614,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep3-iso",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 1023,
 		.hwep_num_base	= 6,
@@ -2619,6 +2627,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep4-int",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 8,
@@ -2630,6 +2640,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep5-bulk",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 10,
@@ -2641,6 +2653,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep6-iso",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 1023,
 		.hwep_num_base	= 12,
@@ -2652,6 +2666,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep7-int",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 14,
@@ -2663,6 +2679,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep8-bulk",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 16,
@@ -2674,6 +2692,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep9-iso",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 1023,
 		.hwep_num_base	= 18,
@@ -2685,6 +2705,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep10-int",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 20,
@@ -2696,6 +2718,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep11-bulk",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 22,
@@ -2707,6 +2731,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep12-iso",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 1023,
 		.hwep_num_base	= 24,
@@ -2718,6 +2744,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep13-int",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 26,
@@ -2729,6 +2757,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep14-bulk",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 64,
 		.hwep_num_base	= 28,
@@ -2740,6 +2770,8 @@ static const struct lpc32xx_udc controller_template = {
 		.ep = {
 			.name	= "ep15-bulk",
 			.ops	= &lpc32xx_ep_ops,
+			.caps	= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+					USB_EP_CAPS_DIR_ALL),
 		},
 		.maxpacket	= 1023,
 		.hwep_num_base	= 30,
-- 
1.9.1

[PATCH v2 20/48] usb: gadget: m66592-udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/m66592-udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index 309706f..e404553 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -1644,6 +1644,17 @@ static int m66592_probe(struct platform_device *pdev)
 		ep->ep.name = m66592_ep_name[i];
 		ep->ep.ops = &m66592_ep_ops;
 		usb_ep_set_maxpacket_limit(&ep->ep, 512);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
 	}
 	usb_ep_set_maxpacket_limit(&m66592->ep[0].ep, 64);
 	m66592->ep[0].pipenum = 0;
-- 
1.9.1

[PATCH v2 21/48] usb: gadget: mv_u3d_core: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/mv_u3d_core.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index ea35a24..4c48969 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1324,6 +1324,9 @@ static int mv_u3d_eps_init(struct mv_u3d *u3d)
 	ep->ep.ops = &mv_u3d_ep_ops;
 	ep->wedge = 0;
 	usb_ep_set_maxpacket_limit(&ep->ep, MV_U3D_EP0_MAX_PKT_SIZE);
+	ep->ep.caps.type_control = true;
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
 	ep->ep_num = 0;
 	ep->ep.desc = &mv_u3d_ep0_desc;
 	INIT_LIST_HEAD(&ep->queue);
@@ -1339,14 +1342,20 @@ static int mv_u3d_eps_init(struct mv_u3d *u3d)
 		if (i & 1) {
 			snprintf(name, sizeof(name), "ep%din", i >> 1);
 			ep->direction = MV_U3D_EP_DIR_IN;
+			ep->ep.caps.dir_in = true;
 		} else {
 			snprintf(name, sizeof(name), "ep%dout", i >> 1);
 			ep->direction = MV_U3D_EP_DIR_OUT;
+			ep->ep.caps.dir_out = true;
 		}
 		ep->u3d = u3d;
 		strncpy(ep->name, name, sizeof(ep->name));
 		ep->ep.name = ep->name;
 
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+
 		ep->ep.ops = &mv_u3d_ep_ops;
 		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
 		ep->ep_num = i / 2;
-- 
1.9.1

[PATCH v2 22/48] usb: gadget: mv_udc_core: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/mv_udc_core.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index d32160d..306a7ff 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -1257,6 +1257,9 @@ static int eps_init(struct mv_udc *udc)
 	ep->wedge = 0;
 	ep->stopped = 0;
 	usb_ep_set_maxpacket_limit(&ep->ep, EP0_MAX_PKT_SIZE);
+	ep->ep.caps.type_control = true;
+	ep->ep.caps.dir_in = true;
+	ep->ep.caps.dir_out = true;
 	ep->ep_num = 0;
 	ep->ep.desc = &mv_ep0_desc;
 	INIT_LIST_HEAD(&ep->queue);
@@ -1269,14 +1272,20 @@ static int eps_init(struct mv_udc *udc)
 		if (i % 2) {
 			snprintf(name, sizeof(name), "ep%din", i / 2);
 			ep->direction = EP_DIR_IN;
+			ep->ep.caps.dir_in = true;
 		} else {
 			snprintf(name, sizeof(name), "ep%dout", i / 2);
 			ep->direction = EP_DIR_OUT;
+			ep->ep.caps.dir_out = true;
 		}
 		ep->udc = udc;
 		strncpy(ep->name, name, sizeof(ep->name));
 		ep->ep.name = ep->name;
 
+		ep->ep.caps.type_iso = true;
+		ep->ep.caps.type_bulk = true;
+		ep->ep.caps.type_int = true;
+
 		ep->ep.ops = &mv_ep_ops;
 		ep->stopped = 0;
 		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
-- 
1.9.1

[PATCH v2 23/48] usb: gadget: net2272: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/net2272.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 195baf3..34ec1ec 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -1404,6 +1404,17 @@ net2272_usb_reinit(struct net2272 *dev)
 		else
 			ep->fifo_size = 64;
 		net2272_ep_reset(ep);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
 	}
 	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64);
 
-- 
1.9.1

[PATCH v2 24/48] usb: gadget: net2280: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/net2280.c | 50 ++++++++++++++++++++++++++++++----------
 1 file changed, 38 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 2bee912..0295cf7 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -74,19 +74,41 @@ static const char driver_desc[] = DRIVER_DESC;
 
 static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 };
 static const char ep0name[] = "ep0";
-static const char *const ep_name[] = {
-	ep0name,
-	"ep-a", "ep-b", "ep-c", "ep-d",
-	"ep-e", "ep-f", "ep-g", "ep-h",
-};
 
-/* Endpoint names for usb3380 advance mode */
-static const char *const ep_name_adv[] = {
-	ep0name,
-	"ep1in", "ep2out", "ep3in", "ep4out",
-	"ep1out", "ep2in", "ep3out", "ep4in",
+#define EP_INFO(_name, _type, _dir) \
+	{ \
+		.name = _name, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+				USB_EP_CAPS_DIR_ ## _dir), \
+	}
+
+static const struct {
+	const char *name;
+	const struct usb_ep_caps caps;
+} ep_info_dft[] = { /* Default endpoint configuration */
+	EP_INFO(ep0name, CONTROL, ALL),
+	EP_INFO("ep-a",		ALL,	ALL),
+	EP_INFO("ep-b",		ALL,	ALL),
+	EP_INFO("ep-c",		ALL,	ALL),
+	EP_INFO("ep-d",		ALL,	ALL),
+	EP_INFO("ep-e",		ALL,	ALL),
+	EP_INFO("ep-f",		ALL,	ALL),
+	EP_INFO("ep-g",		ALL,	ALL),
+	EP_INFO("ep-h",		ALL,	ALL),
+}, ep_info_adv[] = { /* Endpoints for usb3380 advance mode */
+	EP_INFO(ep0name, CONTROL, ALL),
+	EP_INFO("ep1in",	ALL,	IN),
+	EP_INFO("ep2out",	ALL,	OUT),
+	EP_INFO("ep3in",	ALL,	IN),
+	EP_INFO("ep4out",	ALL,	OUT),
+	EP_INFO("ep1out",	ALL,	OUT),
+	EP_INFO("ep2in",	ALL,	IN),
+	EP_INFO("ep3out",	ALL,	OUT),
+	EP_INFO("ep4in",	ALL,	IN),
 };
 
+#undef EP_INFO
+
 /* mode 0 == ep-{a,b,c,d} 1K fifo each
  * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
  * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable
@@ -2055,7 +2077,8 @@ static void usb_reinit_228x(struct net2280 *dev)
 	for (tmp = 0; tmp < 7; tmp++) {
 		struct net2280_ep	*ep = &dev->ep[tmp];
 
-		ep->ep.name = ep_name[tmp];
+		ep->ep.name = ep_info_dft[tmp].name;
+		ep->ep.caps = ep_info_dft[tmp].caps;
 		ep->dev = dev;
 		ep->num = tmp;
 
@@ -2095,7 +2118,10 @@ static void usb_reinit_338x(struct net2280 *dev)
 	for (i = 0; i < dev->n_ep; i++) {
 		struct net2280_ep *ep = &dev->ep[i];
 
-		ep->ep.name = dev->enhanced_mode ? ep_name_adv[i] : ep_name[i];
+		ep->ep.name = dev->enhanced_mode ? ep_info_adv[i].name :
+						   ep_info_dft[i].name;
+		ep->ep.caps = dev->enhanced_mode ? ep_info_adv[i].caps :
+						   ep_info_dft[i].caps;
 		ep->dev = dev;
 		ep->num = i;
 
-- 
1.9.1

[PATCH v2 25/48] usb: gadget: omap_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/omap_udc.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index e2fcdb8..9b7d394 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2579,6 +2579,28 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	ep->double_buf = dbuf;
 	ep->udc = udc;
 
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ep->ep.caps.type_control = true;
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ep->ep.caps.type_iso = true;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ep->ep.caps.type_bulk = true;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ep->ep.caps.type_int = true;
+		break;
+	};
+
+	if (addr & USB_DIR_IN)
+		ep->ep.caps.dir_in = true;
+	else
+		ep->ep.caps.dir_out = true;
+
 	ep->ep.name = ep->name;
 	ep->ep.ops = &omap_ep_ops;
 	ep->maxpacket = maxp;
-- 
1.9.1

[PATCH v2 26/48] usb: gadget: pch_ud: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/pch_udc.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 613547f..cc8fb3c 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -2895,11 +2895,21 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
 		ep->in = ~i & 1;
 		ep->ep.name = ep_string[i];
 		ep->ep.ops = &pch_udc_ep_ops;
-		if (ep->in)
+		if (ep->in) {
 			ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
-		else
+			ep->ep.caps.dir_in = true;
+		} else {
 			ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
 					  UDC_EP_REG_SHIFT;
+			ep->ep.caps.dir_out = true;
+		}
+		if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
 		/* need to set ep->ep.maxpacket and set Default Configuration?*/
 		usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
 		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-- 
1.9.1

[PATCH v2 27/48] usb: gadget: pxa25x_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/pxa25x_udc.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index f6cbe66..1301e29 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -1821,6 +1821,8 @@ static struct pxa25x_udc memory = {
 			.name		= ep0name,
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= EP0_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
 		.reg_udccs	= &UDCCS0,
@@ -1833,6 +1835,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep1in-bulk",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= BULK_FIFO_SIZE,
@@ -1846,6 +1850,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep2out-bulk",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_OUT),
 		},
 		.dev		= &memory,
 		.fifo_size	= BULK_FIFO_SIZE,
@@ -1861,6 +1867,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep3in-iso",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= ISO_FIFO_SIZE,
@@ -1874,6 +1882,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep4out-iso",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_OUT),
 		},
 		.dev		= &memory,
 		.fifo_size	= ISO_FIFO_SIZE,
@@ -1888,6 +1898,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep5in-int",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= INT_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= INT_FIFO_SIZE,
@@ -1903,6 +1915,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep6in-bulk",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= BULK_FIFO_SIZE,
@@ -1916,6 +1930,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep7out-bulk",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_OUT),
 		},
 		.dev		= &memory,
 		.fifo_size	= BULK_FIFO_SIZE,
@@ -1930,6 +1946,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep8in-iso",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= ISO_FIFO_SIZE,
@@ -1943,6 +1961,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep9out-iso",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_OUT),
 		},
 		.dev		= &memory,
 		.fifo_size	= ISO_FIFO_SIZE,
@@ -1957,6 +1977,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep10in-int",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= INT_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= INT_FIFO_SIZE,
@@ -1972,6 +1994,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep11in-bulk",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= BULK_FIFO_SIZE,
@@ -1985,6 +2009,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep12out-bulk",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= BULK_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_OUT),
 		},
 		.dev		= &memory,
 		.fifo_size	= BULK_FIFO_SIZE,
@@ -1999,6 +2025,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep13in-iso",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= ISO_FIFO_SIZE,
@@ -2012,6 +2040,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep14out-iso",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= ISO_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+						USB_EP_CAPS_DIR_OUT),
 		},
 		.dev		= &memory,
 		.fifo_size	= ISO_FIFO_SIZE,
@@ -2026,6 +2056,8 @@ static struct pxa25x_udc memory = {
 			.name		= "ep15in-int",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= INT_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+						USB_EP_CAPS_DIR_IN),
 		},
 		.dev		= &memory,
 		.fifo_size	= INT_FIFO_SIZE,
-- 
1.9.1

[PATCH v2 28/48] usb: gadget: pxa27x_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.h | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h
index 11e1423..ded058c 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.h
+++ b/drivers/usb/gadget/udc/pxa27x_udc.h
@@ -234,25 +234,28 @@
 /*
  * Endpoint definition helpers
  */
-#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \
-{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \
+#define USB_EP_DEF(addr, bname, dir, type, maxpkt, ctype, cdir) \
+{ .usb_ep = {	.name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, \
+		.caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## ctype, \
+				    USB_EP_CAPS_DIR_ ## cdir), }, \
   .desc = {	.bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
-		.bmAttributes = type, \
+		.bmAttributes = USB_ENDPOINT_XFER_ ## type, \
 		.wMaxPacketSize = maxpkt, }, \
   .dev = &memory \
 }
-#define USB_EP_BULK(addr, bname, dir) \
-  USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE)
-#define USB_EP_ISO(addr, bname, dir) \
-  USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE)
-#define USB_EP_INT(addr, bname, dir) \
-  USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE)
-#define USB_EP_IN_BULK(n)	USB_EP_BULK(n, "ep" #n "in-bulk", 1)
-#define USB_EP_OUT_BULK(n)	USB_EP_BULK(n, "ep" #n "out-bulk", 0)
-#define USB_EP_IN_ISO(n)	USB_EP_ISO(n,  "ep" #n "in-iso", 1)
-#define USB_EP_OUT_ISO(n)	USB_EP_ISO(n,  "ep" #n "out-iso", 0)
-#define USB_EP_IN_INT(n)	USB_EP_INT(n,  "ep" #n "in-int", 1)
-#define USB_EP_CTRL		USB_EP_DEF(0,  "ep0", 0, 0, EP0_FIFO_SIZE)
+#define USB_EP_BULK(addr, bname, dir, cdir) \
+	USB_EP_DEF(addr, bname, dir, BULK, BULK_FIFO_SIZE, BULK, cdir)
+#define USB_EP_ISO(addr, bname, dir, cdir) \
+	USB_EP_DEF(addr, bname, dir, ISOC, ISO_FIFO_SIZE, ISO, cdir)
+#define USB_EP_INT(addr, bname, dir, cdir) \
+	USB_EP_DEF(addr, bname, dir, INT, INT_FIFO_SIZE, INT, cdir)
+#define USB_EP_IN_BULK(n)	USB_EP_BULK(n, "ep" #n "in-bulk", 1, IN)
+#define USB_EP_OUT_BULK(n)	USB_EP_BULK(n, "ep" #n "out-bulk", 0, OUT)
+#define USB_EP_IN_ISO(n)	USB_EP_ISO(n,  "ep" #n "in-iso", 1, IN)
+#define USB_EP_OUT_ISO(n)	USB_EP_ISO(n,  "ep" #n "out-iso", 0, OUT)
+#define USB_EP_IN_INT(n)	USB_EP_INT(n,  "ep" #n "in-int", 1, IN)
+#define USB_EP_CTRL		USB_EP_DEF(0,  "ep0", 0, CONTROL, \
+					   EP0_FIFO_SIZE, CONTROL, ALL)
 
 #define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
 { \
-- 
1.9.1

[PATCH v2 29/48] usb: gadget: r8a66597-udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/r8a66597-udc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 0293f71..baa0609 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1935,6 +1935,16 @@ static int r8a66597_probe(struct platform_device *pdev)
 		ep->ep.name = r8a66597_ep_name[i];
 		ep->ep.ops = &r8a66597_ep_ops;
 		usb_ep_set_maxpacket_limit(&ep->ep, 512);
+
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
 	}
 	usb_ep_set_maxpacket_limit(&r8a66597->ep[0].ep, 64);
 	r8a66597->ep[0].pipenum = 0;
-- 
1.9.1

[PATCH v2 30/48] usb: gadget: s3c-hsudc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/s3c-hsudc.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 85a712a..e9def42 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -1005,6 +1005,21 @@ static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
 	hsep->stopped = 0;
 	hsep->wedge = 0;
 
+	if (epnum == 0) {
+		hsep->ep.caps.type_control = true;
+		hsep->ep.caps.dir_in = true;
+		hsep->ep.caps.dir_out = true;
+	} else {
+		hsep->ep.caps.type_iso = true;
+		hsep->ep.caps.type_bulk = true;
+		hsep->ep.caps.type_int = true;
+	}
+
+	if (epnum & 1)
+		hsep->ep.caps.dir_in = true;
+	else
+		hsep->ep.caps.dir_out = true;
+
 	set_index(hsudc, epnum);
 	writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR);
 }
-- 
1.9.1

[PATCH v2 31/48] usb: gadget: s3c2410_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/s3c2410_udc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index 5d9aa81..eb3571e 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -1691,6 +1691,8 @@ static struct s3c2410_udc memory = {
 			.name		= ep0name,
 			.ops		= &s3c2410_ep_ops,
 			.maxpacket	= EP0_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
 	},
@@ -1702,6 +1704,8 @@ static struct s3c2410_udc memory = {
 			.name		= "ep1-bulk",
 			.ops		= &s3c2410_ep_ops,
 			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
 		.fifo_size	= EP_FIFO_SIZE,
@@ -1714,6 +1718,8 @@ static struct s3c2410_udc memory = {
 			.name		= "ep2-bulk",
 			.ops		= &s3c2410_ep_ops,
 			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
 		.fifo_size	= EP_FIFO_SIZE,
@@ -1726,6 +1732,8 @@ static struct s3c2410_udc memory = {
 			.name		= "ep3-bulk",
 			.ops		= &s3c2410_ep_ops,
 			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
 		.fifo_size	= EP_FIFO_SIZE,
@@ -1738,6 +1746,8 @@ static struct s3c2410_udc memory = {
 			.name		= "ep4-bulk",
 			.ops		= &s3c2410_ep_ops,
 			.maxpacket	= EP_FIFO_SIZE,
+			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+						USB_EP_CAPS_DIR_ALL),
 		},
 		.dev		= &memory,
 		.fifo_size	= EP_FIFO_SIZE,
-- 
1.9.1

[PATCH v2 32/48] usb: gadget: udc-xilinx: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/udc-xilinx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index 1f24274..1cbb0ac 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -1317,12 +1317,21 @@ static void xudc_eps_init(struct xusb_udc *udc)
 			snprintf(ep->name, EPNAME_SIZE, "ep%d", ep_number);
 			ep->ep_usb.name = ep->name;
 			ep->ep_usb.ops = &xusb_ep_ops;
+
+			ep->ep_usb.caps.type_iso = true;
+			ep->ep_usb.caps.type_bulk = true;
+			ep->ep_usb.caps.type_int = true;
 		} else {
 			ep->ep_usb.name = ep0name;
 			usb_ep_set_maxpacket_limit(&ep->ep_usb, EP0_MAX_PACKET);
 			ep->ep_usb.ops = &xusb_ep0_ops;
+
+			ep->ep_usb.caps.type_control = true;
 		}
 
+		ep->ep_usb.caps.dir_in = true;
+		ep->ep_usb.caps.dir_out = true;
+
 		ep->udc = udc;
 		ep->epnumber = ep_number;
 		ep->desc = NULL;
-- 
1.9.1

[PATCH v2 33/48] usb: isp1760: udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/isp1760/isp1760-udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 3699962..1c3d0fd 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1383,13 +1383,24 @@ static void isp1760_udc_init_eps(struct isp1760_udc *udc)
 		 */
 		if (ep_num == 0) {
 			usb_ep_set_maxpacket_limit(&ep->ep, 64);
+			ep->ep.caps.type_control = true;
+			ep->ep.caps.dir_in = true;
+			ep->ep.caps.dir_out = true;
 			ep->maxpacket = 64;
 			udc->gadget.ep0 = &ep->ep;
 		} else {
 			usb_ep_set_maxpacket_limit(&ep->ep, 512);
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
 			ep->maxpacket = 0;
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 		}
+
+		if (is_in)
+			ep->ep.caps.dir_in = true;
+		else
+			ep->ep.caps.dir_out = true;
 	}
 }
 
-- 
1.9.1

[PATCH v2 34/48] usb: musb: gadget: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/musb/musb_gadget.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 625d482f..043248a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1729,6 +1729,7 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 	INIT_LIST_HEAD(&ep->end_point.ep_list);
 	if (!epnum) {
 		usb_ep_set_maxpacket_limit(&ep->end_point, 64);
+		ep->end_point.caps.type_control = true;
 		ep->end_point.ops = &musb_g_ep0_ops;
 		musb->g.ep0 = &ep->end_point;
 	} else {
@@ -1736,9 +1737,20 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 			usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx);
 		else
 			usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx);
+		ep->end_point.caps.type_iso = true;
+		ep->end_point.caps.type_bulk = true;
+		ep->end_point.caps.type_int = true;
 		ep->end_point.ops = &musb_ep_ops;
 		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
 	}
+
+	if (!epnum || hw_ep->is_shared_fifo) {
+		ep->end_point.caps.dir_in = true;
+		ep->end_point.caps.dir_out = true;
+	} else if (is_in)
+		ep->end_point.caps.dir_in = true;
+	else
+		ep->end_point.caps.dir_out = true;
 }
 
 /*
-- 
1.9.1

[PATCH v2 35/48] usb: renesas: gadget: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/renesas_usbhs/mod_gadget.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index dc2aa32..ed8d890 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1041,12 +1041,18 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 		if (usbhsg_is_dcp(uep)) {
 			gpriv->gadget.ep0 = &uep->ep;
 			usb_ep_set_maxpacket_limit(&uep->ep, 64);
+			uep->ep.caps.type_control = true;
 		}
 		/* init normal pipe */
 		else {
 			usb_ep_set_maxpacket_limit(&uep->ep, 512);
+			uep->ep.caps.type_iso = true;
+			uep->ep.caps.type_bulk = true;
+			uep->ep.caps.type_int = true;
 			list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list);
 		}
+		uep->ep.caps.dir_in = true;
+		uep->ep.caps.dir_out = true;
 	}
 
 	ret = usb_add_gadget_udc(dev, &gpriv->gadget);
-- 
1.9.1

[PATCH v2 36/48] usb: gadget: atmel_usba_udc: add ep capabilities support

[Robert Baldyga]

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 37d414e..267d84f 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2067,6 +2067,17 @@ static struct usba_ep * usba_udc_pdata(struct platform_device *pdev,
 		ep->can_dma = pdata->ep[i].can_dma;
 		ep->can_isoc = pdata->ep[i].can_isoc;
 
+		if (i == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = ep->can_isoc;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
 		if (i)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 	}
-- 
1.9.1

[PATCH v2 37/48] usb: gadget: epautoconf: add endpoint capabilities flags verification

[Robert Baldyga]

Introduce endpoint matching mechanism basing on endpoint capabilities
flags. We check if endpoint supports transfer type and direction requested
in ep descriptor. Since we have this new endpoint matching mechanism
there is no need to have old code guessing endpoint capabilities basing
on its name, so we are getting rid of it. Remove also the obsolete comment.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 96 +++++++++++++----------------------------
 1 file changed, 30 insertions(+), 66 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 8e00ca7..af4b10a 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,22 +22,6 @@
 
 #include "gadget_chips.h"
 
-/*
- * This should work with endpoints from controller drivers sharing the
- * same endpoint naming convention.  By example:
- *
- *	- ep1, ep2, ... address is fixed, not direction or type
- *	- ep1in, ep2out, ... address and direction are fixed, not type
- *	- ep1-bulk, ep2-bulk, ... address and type are fixed, not direction
- *	- ep1in-bulk, ep2out-iso, ... all three are fixed
- *	- ep-* ... no functionality restrictions
- *
- * Type suffixes are "-bulk", "-iso", or "-int".  Numbers are decimal.
- * Less common restrictions are implied by gadget_is_*().
- *
- * NOTE:  each endpoint is unidirectional, as specified by its USB
- * descriptor; and isn't specific to a configuration or altsetting.
- */
 static int
 ep_matches (
 	struct usb_gadget		*gadget,
@@ -47,7 +31,6 @@ ep_matches (
 )
 {
 	u8		type;
-	const char	*tmp;
 	u16		max;
 
 	int		num_req_streams = 0;
@@ -56,58 +39,39 @@ ep_matches (
 	if (ep->claimed)
 		return 0;
 
-	/* only support ep0 for portable CONTROL traffic */
 	type = usb_endpoint_type(desc);
-	if (USB_ENDPOINT_XFER_CONTROL == type)
-		return 0;
-
-	/* some other naming convention */
-	if ('e' != ep->name[0])
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* only support ep0 for portable CONTROL traffic */
 		return 0;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->caps.type_iso)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (!ep->caps.type_bulk)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		/* bulk endpoints handle interrupt transfers,
+		 * except the toggle-quirky iso-synch kind
+		 */
+		if (!ep->caps.type_int && !ep->caps.type_bulk)
+			return 0;
+		/* for now, avoid PXA "interrupt-in";
+		 * it's documented as never using DATA1.
+		 */
+		if (gadget_is_pxa(gadget) && ep->caps.type_int)
+			return 0;
+		break;
+	}
 
-	/* type-restriction:  "-iso", "-bulk", or "-int".
-	 * direction-restriction:  "in", "out".
-	 */
-	if ('-' != ep->name[2]) {
-		tmp = strrchr (ep->name, '-');
-		if (tmp) {
-			switch (type) {
-			case USB_ENDPOINT_XFER_INT:
-				/* bulk endpoints handle interrupt transfers,
-				 * except the toggle-quirky iso-synch kind
-				 */
-				if ('s' == tmp[2])	// == "-iso"
-					return 0;
-				/* for now, avoid PXA "interrupt-in";
-				 * it's documented as never using DATA1.
-				 */
-				if (gadget_is_pxa (gadget)
-						&& 'i' == tmp [1])
-					return 0;
-				break;
-			case USB_ENDPOINT_XFER_BULK:
-				if ('b' != tmp[1])	// != "-bulk"
-					return 0;
-				break;
-			case USB_ENDPOINT_XFER_ISOC:
-				if ('s' != tmp[2])	// != "-iso"
-					return 0;
-			}
-		} else {
-			tmp = ep->name + strlen (ep->name);
-		}
-
-		/* direction-restriction:  "..in-..", "out-.." */
-		tmp--;
-		if (!isdigit (*tmp)) {
-			if (desc->bEndpointAddress & USB_DIR_IN) {
-				if ('n' != *tmp)
-					return 0;
-			} else {
-				if ('t' != *tmp)
-					return 0;
-			}
-		}
+	if (usb_endpoint_dir_in(desc)) {
+		if (!ep->caps.dir_in)
+			return 0;
+	} else {
+		if (!ep->caps.dir_out)
+			return 0;
 	}
 
 	/*
-- 
1.9.1

[PATCH v2 38/48] usb: gadget: epautoconf: remove pxa quirk from ep_matches()

[Robert Baldyga]

The same effect can be achieved by using capabilities flags, so now we can
get rid of handing of hardware specific limitations in generic code.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c     | 5 -----
 drivers/usb/gadget/udc/pxa25x_udc.c | 9 +++------
 2 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index af4b10a..4f66e9d73 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -58,11 +58,6 @@ ep_matches (
 		 */
 		if (!ep->caps.type_int && !ep->caps.type_bulk)
 			return 0;
-		/* for now, avoid PXA "interrupt-in";
-		 * it's documented as never using DATA1.
-		 */
-		if (gadget_is_pxa(gadget) && ep->caps.type_int)
-			return 0;
 		break;
 	}
 
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index 1301e29..f53e526 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -1898,8 +1898,7 @@ static struct pxa25x_udc memory = {
 			.name		= "ep5in-int",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= INT_FIFO_SIZE,
-			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
-						USB_EP_CAPS_DIR_IN),
+			.caps		= USB_EP_CAPS(0, 0),
 		},
 		.dev		= &memory,
 		.fifo_size	= INT_FIFO_SIZE,
@@ -1977,8 +1976,7 @@ static struct pxa25x_udc memory = {
 			.name		= "ep10in-int",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= INT_FIFO_SIZE,
-			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
-						USB_EP_CAPS_DIR_IN),
+			.caps		= USB_EP_CAPS(0, 0),
 		},
 		.dev		= &memory,
 		.fifo_size	= INT_FIFO_SIZE,
@@ -2056,8 +2054,7 @@ static struct pxa25x_udc memory = {
 			.name		= "ep15in-int",
 			.ops		= &pxa25x_ep_ops,
 			.maxpacket	= INT_FIFO_SIZE,
-			.caps		= USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
-						USB_EP_CAPS_DIR_IN),
+			.caps		= USB_EP_CAPS(0, 0),
 		},
 		.dev		= &memory,
 		.fifo_size	= INT_FIFO_SIZE,
-- 
1.9.1

[PATCH v2 39/48] usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()

[Robert Baldyga]

As function ep_matches() is used to match endpoint with usb descriptor it's
highly unintuitive that it modifies endpoint and descriptor structures fields.
This patch moves code configuring ep and desc from ep_matches() to
usb_ep_autoconfig_ss(), so now function ep_matches() does nothing more than
its name is suggesting.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 66 +++++++++++++++++++++--------------------
 1 file changed, 34 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 4f66e9d73..d00b443 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -82,13 +82,6 @@ ep_matches (
 
 	}
 
-	/*
-	 * If the protocol driver hasn't yet decided on wMaxPacketSize
-	 * and wants to know the maximum possible, provide the info.
-	 */
-	if (desc->wMaxPacketSize == 0)
-		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
-
 	/* endpoint maxpacket size is an input parameter, except for bulk
 	 * where it's an output parameter representing the full speed limit.
 	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
@@ -119,31 +112,6 @@ ep_matches (
 
 	/* MATCH!! */
 
-	/* report address */
-	desc->bEndpointAddress &= USB_DIR_IN;
-	if (isdigit (ep->name [2])) {
-		u8	num = simple_strtoul (&ep->name [2], NULL, 10);
-		desc->bEndpointAddress |= num;
-	} else if (desc->bEndpointAddress & USB_DIR_IN) {
-		if (++gadget->in_epnum > 15)
-			return 0;
-		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
-	} else {
-		if (++gadget->out_epnum > 15)
-			return 0;
-		desc->bEndpointAddress |= gadget->out_epnum;
-	}
-
-	/* report (variable) full speed bulk maxpacket */
-	if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
-		int size = ep->maxpacket_limit;
-
-		/* min() doesn't work on bitfields with gcc-3.5 */
-		if (size > 64)
-			size = 64;
-		desc->wMaxPacketSize = cpu_to_le16(size);
-	}
-	ep->address = desc->bEndpointAddress;
 	return 1;
 }
 
@@ -280,6 +248,40 @@ struct usb_ep *usb_ep_autoconfig_ss(
 	/* Fail */
 	return NULL;
 found_ep:
+
+	/*
+	 * If the protocol driver hasn't yet decided on wMaxPacketSize
+	 * and wants to know the maximum possible, provide the info.
+	 */
+	if (desc->wMaxPacketSize == 0)
+		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
+
+	/* report address */
+	desc->bEndpointAddress &= USB_DIR_IN;
+	if (isdigit(ep->name[2])) {
+		u8 num = simple_strtoul(&ep->name[2], NULL, 10);
+		desc->bEndpointAddress |= num;
+	} else if (desc->bEndpointAddress & USB_DIR_IN) {
+		if (++gadget->in_epnum > 15)
+			return 0;
+		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
+	} else {
+		if (++gadget->out_epnum > 15)
+			return 0;
+		desc->bEndpointAddress |= gadget->out_epnum;
+	}
+
+	/* report (variable) full speed bulk maxpacket */
+	if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
+		int size = ep->maxpacket_limit;
+
+		/* min() doesn't work on bitfields with gcc-3.5 */
+		if (size > 64)
+			size = 64;
+		desc->wMaxPacketSize = cpu_to_le16(size);
+	}
+
+	ep->address = desc->bEndpointAddress;
 	ep->desc = NULL;
 	ep->comp_desc = NULL;
 	ep->claimed = true;
-- 
1.9.1

[PATCH v2 40/48] usb: gadget: epautoconf: rework ep_matches() function

[Robert Baldyga]

Rework ep_matches() function to make it shorter and better readable.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 87 +++++++++++++++++------------------------
 1 file changed, 35 insertions(+), 52 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index d00b443..ee0d4e6 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -30,16 +30,29 @@ ep_matches (
 	struct usb_ss_ep_comp_descriptor *ep_comp
 )
 {
-	u8		type;
-	u16		max;
-
-	int		num_req_streams = 0;
+	u8              type;
+	u16             max;
+	int             num_req_streams = 0;
 
 	/* endpoint already claimed? */
 	if (ep->claimed)
 		return 0;
 
 	type = usb_endpoint_type(desc);
+	max = 0x7ff & usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	else if (!ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+		return 0;
+
 	switch (type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		/* only support ep0 for portable CONTROL traffic */
@@ -47,66 +60,36 @@ ep_matches (
 	case USB_ENDPOINT_XFER_ISOC:
 		if (!ep->caps.type_iso)
 			return 0;
+		/* ISO:  limit 1023 bytes full speed,
+		 * 1024 high/super speed
+		 */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		if (!ep->caps.type_bulk)
 			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
 		break;
 	case USB_ENDPOINT_XFER_INT:
-		/* bulk endpoints handle interrupt transfers,
+		/* Bulk endpoints handle interrupt transfers,
 		 * except the toggle-quirky iso-synch kind
 		 */
 		if (!ep->caps.type_int && !ep->caps.type_bulk)
 			return 0;
-		break;
-	}
-
-	if (usb_endpoint_dir_in(desc)) {
-		if (!ep->caps.dir_in)
-			return 0;
-	} else {
-		if (!ep->caps.dir_out)
-			return 0;
-	}
-
-	/*
-	 * Get the number of required streams from the EP companion
-	 * descriptor and see if the EP matches it
-	 */
-	if (usb_endpoint_xfer_bulk(desc)) {
-		if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-
-	}
-
-	/* endpoint maxpacket size is an input parameter, except for bulk
-	 * where it's an output parameter representing the full speed limit.
-	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
-	 */
-	max = 0x7ff & usb_endpoint_maxp(desc);
-	switch (type) {
-	case USB_ENDPOINT_XFER_INT:
-		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		/* INT:  limit 64 bytes full speed,
+		 * 1024 high/super speed
+		 */
 		if (!gadget_is_dualspeed(gadget) && max > 64)
 			return 0;
-		/* FALLTHROUGH */
-
-	case USB_ENDPOINT_XFER_ISOC:
-		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
-		if (ep->maxpacket_limit < max)
-			return 0;
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-
-		/* BOTH:  "high bandwidth" works only at high speed */
-		if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
-			if (!gadget_is_dualspeed(gadget))
-				return 0;
-			/* configure your hardware with enough buffering!! */
-		}
 		break;
 	}
 
-- 
1.9.1

[PATCH v2 41/48] usb: gadget: add 'ep_match' callback to usb_gadget_ops

[Robert Baldyga]

This callback will be called by epautoconf to allow UDC driver match best
endpoint for specific descriptor. It's intended to supply mechanism which
allows to get rid of chip-specific endpoint matching code from epautoconf.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 include/linux/usb/gadget.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e6cbc25..0041bb9 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -534,6 +534,9 @@ struct usb_gadget_ops {
 	int	(*udc_start)(struct usb_gadget *,
 			struct usb_gadget_driver *);
 	int	(*udc_stop)(struct usb_gadget *);
+	struct usb_ep *(*match_ep)(struct usb_gadget *,
+			struct usb_endpoint_descriptor *,
+			struct usb_ss_ep_comp_descriptor *);
 };
 
 /**
-- 
1.9.1

[PATCH v2 42/48] usb: gadget: epautoconf: use 'ep_match' gadget callback

[Robert Baldyga]

If gadget has set 'ep_match' callback we prefer to call it first to allow
UDC driver to find the best matching endpoint basing on chip-specific "best
usage" knowledge.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index ee0d4e6..92a1a4c 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -165,6 +165,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
 
 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 
+	if (gadget->ops->match_ep) {
+		ep = gadget->ops->match_ep(gadget, desc, ep_comp);
+		if (ep)
+			goto found_ep;
+	}
+
 	/* First, apply chip-specific "best usage" knowledge.
 	 * This might make a good usb_gadget_ops hook ...
 	 */
-- 
1.9.1

[PATCH v2 43/48] usb: gadget: udc: add usb_gadget_ep_match_desc() function

[Robert Baldyga]

Add function matching endpoint with ep descriptor. This function checks if
hardware endponit can fulfill requirements requested in descriptor. This
function can be used by UDC drivers in match_ep() callback to avoid writing
lots of repetitive code.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/udc/udc-core.c | 69 +++++++++++++++++++++++++++++++++++++++
 include/linux/usb/gadget.h        |  8 +++++
 2 files changed, 77 insertions(+)

diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index d69c355..2dff8df 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -129,6 +129,75 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
 
 /* ------------------------------------------------------------------------- */
 
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	u8              type;
+	u16             max;
+	int             num_req_streams = 0;
+
+	/* endpoint already claimed? */
+	if (ep->claimed)
+		return 0;
+
+	type = usb_endpoint_type(desc);
+	max = 0x7ff & usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	else if (!ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+		return 0;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* only support ep0 for portable CONTROL traffic */
+		return 0;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->caps.type_iso)
+			return 0;
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (!ep->caps.type_bulk)
+			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		/* Bulk endpoints handle interrupt transfers,
+		 * except the toggle-quirky iso-synch kind
+		 */
+		if (!ep->caps.type_int && !ep->caps.type_bulk)
+			return 0;
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 64)
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
 static void usb_gadget_state_work(struct work_struct *work)
 {
 	struct usb_gadget *gadget = work_to_gadget(work);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 0041bb9..77e2c1e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1079,6 +1079,14 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep,
 
 /*-------------------------------------------------------------------------*/
 
+/* utility to check if endpoint caps match descriptor needs */
+
+extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp);
+
+/*-------------------------------------------------------------------------*/
+
 /* utility to update vbus status for udc core, it may be scheduled */
 extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);
 
-- 
1.9.1

[PATCH v2 44/48] usb: gadget: epautoconf: remove ep_matches() function

[Robert Baldyga]

As now we have usb_gadget_ep_match_desc() function which does exactly the same
thing as ep_matches(), we can remove the second one and replace all of its calls
with usb_gadget_ep_match_desc() calls.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 95 +++++------------------------------------
 1 file changed, 11 insertions(+), 84 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 92a1a4c..7c43b7c 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,82 +22,6 @@
 
 #include "gadget_chips.h"
 
-static int
-ep_matches (
-	struct usb_gadget		*gadget,
-	struct usb_ep			*ep,
-	struct usb_endpoint_descriptor	*desc,
-	struct usb_ss_ep_comp_descriptor *ep_comp
-)
-{
-	u8              type;
-	u16             max;
-	int             num_req_streams = 0;
-
-	/* endpoint already claimed? */
-	if (ep->claimed)
-		return 0;
-
-	type = usb_endpoint_type(desc);
-	max = 0x7ff & usb_endpoint_maxp(desc);
-
-	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
-		return 0;
-	else if (!ep->caps.dir_out)
-		return 0;
-
-	if (max > ep->maxpacket_limit)
-		return 0;
-
-	/* "high bandwidth" works only at high speed */
-	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
-		return 0;
-
-	switch (type) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		/* only support ep0 for portable CONTROL traffic */
-		return 0;
-	case USB_ENDPOINT_XFER_ISOC:
-		if (!ep->caps.type_iso)
-			return 0;
-		/* ISO:  limit 1023 bytes full speed,
-		 * 1024 high/super speed
-		 */
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if (!ep->caps.type_bulk)
-			return 0;
-		if (ep_comp && gadget_is_superspeed(gadget)) {
-			/* Get the number of required streams from the
-			 * EP companion descriptor and see if the EP
-			 * matches it
-			 */
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		/* Bulk endpoints handle interrupt transfers,
-		 * except the toggle-quirky iso-synch kind
-		 */
-		if (!ep->caps.type_int && !ep->caps.type_bulk)
-			return 0;
-		/* INT:  limit 64 bytes full speed,
-		 * 1024 high/super speed
-		 */
-		if (!gadget_is_dualspeed(gadget) && max > 64)
-			return 0;
-		break;
-	}
-
-	/* MATCH!! */
-
-	return 1;
-}
-
 static struct usb_ep *
 find_ep (struct usb_gadget *gadget, const char *name)
 {
@@ -180,10 +104,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
 		if (type == USB_ENDPOINT_XFER_INT) {
 			/* ep-e, ep-f are PIO with only 64 byte fifos */
 			ep = find_ep(gadget, "ep-e");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 			ep = find_ep(gadget, "ep-f");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 		}
 
@@ -191,20 +117,21 @@ struct usb_ep *usb_ep_autoconfig_ss(
 		snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
 				usb_endpoint_dir_in(desc) ? "in" : "out");
 		ep = find_ep(gadget, name);
-		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 	} else if (gadget_is_goku (gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
 			ep = find_ep(gadget, "ep3-bulk");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 		} else if (USB_ENDPOINT_XFER_BULK == type
 				&& (USB_DIR_IN & desc->bEndpointAddress)) {
 			/* DMA may be available */
 			ep = find_ep(gadget, "ep2-bulk");
-			if (ep && ep_matches(gadget, ep, desc,
-					      ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 		}
 
@@ -223,14 +150,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
 				ep = find_ep(gadget, "ep2out");
 		} else
 			ep = NULL;
-		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 #endif
 	}
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (ep_matches(gadget, ep, desc, ep_comp))
+		if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 	}
 
-- 
1.9.1

[PATCH v2 45/48] usb: gadget: net2280: add net2280_match_ep() function

[Robert Baldyga]

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c  | 23 +--------------------
 drivers/usb/gadget/udc/net2280.c | 44 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 7c43b7c..3ac92b4 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -98,28 +98,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
 	/* First, apply chip-specific "best usage" knowledge.
 	 * This might make a good usb_gadget_ops hook ...
 	 */
-	if (gadget_is_net2280(gadget)) {
-		char name[8];
-
-		if (type == USB_ENDPOINT_XFER_INT) {
-			/* ep-e, ep-f are PIO with only 64 byte fifos */
-			ep = find_ep(gadget, "ep-e");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-			ep = find_ep(gadget, "ep-f");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-		}
-
-		/* USB3380: use same address for usb and hardware endpoints */
-		snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
-				usb_endpoint_dir_in(desc) ? "in" : "out");
-		ep = find_ep(gadget, name);
-		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
-			goto found_ep;
-	} else if (gadget_is_goku (gadget)) {
+	if (gadget_is_goku (gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
 			ep = find_ep(gadget, "ep3-bulk");
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 0295cf7..4933321 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1533,6 +1533,49 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
+static struct usb_ep *net2280_find_ep(struct usb_gadget *_gadget,
+		const char *name)
+{
+	struct usb_ep *ep;
+
+	list_for_each_entry(ep, &_gadget->ep_list, ep_list) {
+		if (0 == strcmp(ep->name, name))
+			return ep;
+	}
+
+	return NULL;
+}
+
+static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	char name[8];
+	struct usb_ep *ep;
+	u8 type;
+
+	type = usb_endpoint_type(desc);
+
+	if (type == USB_ENDPOINT_XFER_INT) {
+		/* ep-e, ep-f are PIO with only 64 byte fifos */
+		ep = net2280_find_ep(_gadget, "ep-e");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = net2280_find_ep(_gadget, "ep-f");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	}
+
+	/* USB3380: use same address for usb and hardware endpoints */
+	snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
+			usb_endpoint_dir_in(desc) ? "in" : "out");
+	ep = net2280_find_ep(_gadget, name);
+	if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+		return ep;
+
+	return NULL;
+}
+
 static int net2280_start(struct usb_gadget *_gadget,
 		struct usb_gadget_driver *driver);
 static int net2280_stop(struct usb_gadget *_gadget);
@@ -1544,6 +1587,7 @@ static const struct usb_gadget_ops net2280_ops = {
 	.pullup		= net2280_pullup,
 	.udc_start	= net2280_start,
 	.udc_stop	= net2280_stop,
+	.match_ep	= net2280_match_ep,
 };
 
 /*-------------------------------------------------------------------------*/
-- 
1.9.1

[PATCH v2 46/48] usb: gadget: goku_udc: add goku_match_ep() function

[Robert Baldyga]

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c   | 20 ++------------------
 drivers/usb/gadget/udc/goku_udc.c | 25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 3ac92b4..038b21d 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -98,24 +98,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
 	/* First, apply chip-specific "best usage" knowledge.
 	 * This might make a good usb_gadget_ops hook ...
 	 */
-	if (gadget_is_goku (gadget)) {
-		if (USB_ENDPOINT_XFER_INT == type) {
-			/* single buffering is enough */
-			ep = find_ep(gadget, "ep3-bulk");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-		} else if (USB_ENDPOINT_XFER_BULK == type
-				&& (USB_DIR_IN & desc->bEndpointAddress)) {
-			/* DMA may be available */
-			ep = find_ep(gadget, "ep2-bulk");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-		}
-
 #ifdef CONFIG_BLACKFIN
-	} else if (gadget_is_musbhdrc(gadget)) {
+	if (gadget_is_musbhdrc(gadget)) {
 		if ((USB_ENDPOINT_XFER_BULK == type) ||
 		    (USB_ENDPOINT_XFER_ISOC == type)) {
 			if (USB_DIR_IN & desc->bEndpointAddress)
@@ -131,8 +115,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
 			ep = NULL;
 		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
-#endif
 	}
+#endif
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 46b8d14..d25b3a3 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -990,6 +990,30 @@ static int goku_get_frame(struct usb_gadget *_gadget)
 	return -EOPNOTSUPP;
 }
 
+static struct usb_ep *goku_match_ep(struct usb_gadget *g,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	struct goku_udc	*dev = to_goku_udc(g);
+	struct usb_ep *ep;
+	u8 type = usb_endpoint_type(desc);
+
+	if (USB_ENDPOINT_XFER_INT == type) {
+		/* single buffering is enough */
+		ep = &dev->ep[3].ep;
+		if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+			return ep;
+	} else if (USB_ENDPOINT_XFER_BULK == type
+			&& usb_endpoint_dir_in(desc)) {
+		/* DMA may be available */
+		ep = &dev->ep[2].ep;
+		if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+			return ep;
+	}
+
+	return NULL;
+}
+
 static int goku_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 static int goku_udc_stop(struct usb_gadget *g);
@@ -998,6 +1022,7 @@ static const struct usb_gadget_ops goku_ops = {
 	.get_frame	= goku_get_frame,
 	.udc_start	= goku_udc_start,
 	.udc_stop	= goku_udc_stop,
+	.match_ep	= goku_match_ep,
 	// no remote wakeup
 	// not selfpowered
 };
-- 
1.9.1

[PATCH v2 47/48] usb: musb: gadget: add musb_match_ep() function

[Robert Baldyga]

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 23 ---------------------
 drivers/usb/musb/musb_gadget.c  | 44 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 038b21d..e9a8682 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -95,29 +95,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
 			goto found_ep;
 	}
 
-	/* First, apply chip-specific "best usage" knowledge.
-	 * This might make a good usb_gadget_ops hook ...
-	 */
-#ifdef CONFIG_BLACKFIN
-	if (gadget_is_musbhdrc(gadget)) {
-		if ((USB_ENDPOINT_XFER_BULK == type) ||
-		    (USB_ENDPOINT_XFER_ISOC == type)) {
-			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = find_ep (gadget, "ep5in");
-			else
-				ep = find_ep (gadget, "ep6out");
-		} else if (USB_ENDPOINT_XFER_INT == type) {
-			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = find_ep(gadget, "ep1in");
-			else
-				ep = find_ep(gadget, "ep2out");
-		} else
-			ep = NULL;
-		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
-			goto found_ep;
-	}
-#endif
-
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 043248a..5f1eb35 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1684,6 +1684,49 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+#ifdef CONFIG_BLACKFIN
+static struct usb_ep *musb_find_ep(struct usb_gadget *g,
+		const char *name)
+{
+	struct usb_ep *ep;
+
+	list_for_each_entry(ep, &g->ep_list, ep_list) {
+		if (0 == strcmp(ep->name, name))
+			return ep;
+	}
+
+	return NULL;
+}
+
+static struct usb_ep *match_match_ep(struct usb_gadget *g,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	struct usb_ep *ep = NULL;
+	u8 type = usb_endpoint_type(desc);
+
+	if ((USB_ENDPOINT_XFER_BULK == type) ||
+			(USB_ENDPOINT_XFER_ISOC == type)) {
+		if (USB_DIR_IN & desc->bEndpointAddress)
+			ep = musb_find_ep(g, "ep5in");
+		else
+			ep = musb_find_ep(g, "ep6out");
+	} else if (USB_ENDPOINT_XFER_INT == type) {
+		if (USB_DIR_IN & desc->bEndpointAddress)
+			ep = musb_find_ep(g, "ep1in");
+		else
+			ep = musb_find_ep(g, "ep2out");
+	}
+
+	if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+		return ep;
+
+	return NULL;
+}
+#else
+#define musb_match_ep NULL
+#endif
+
 static int musb_gadget_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 static int musb_gadget_stop(struct usb_gadget *g);
@@ -1697,6 +1740,7 @@ static const struct usb_gadget_ops musb_gadget_operations = {
 	.pullup			= musb_gadget_pullup,
 	.udc_start		= musb_gadget_start,
 	.udc_stop		= musb_gadget_stop,
+	.match_ep		= musb_match_ep,
 };
 
 /* ----------------------------------------------------------------------- */
-- 
1.9.1

[PATCH v2 48/48] usb: gadget: epautoconf: cleanup dead code

[Robert Baldyga]

Function find_ep() is no longer needed here, so we can remove it.
We also don't use anything from gadget_chips.h header any longer.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index e9a8682..9a80925 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -20,20 +20,6 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-#include "gadget_chips.h"
-
-static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
-{
-	struct usb_ep	*ep;
-
-	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (0 == strcmp (ep->name, name))
-			return ep;
-	}
-	return NULL;
-}
-
 /**
  * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
  * descriptor and ep companion descriptor
-- 
1.9.1

Re: [PATCH v2 42/48] usb: gadget: epautoconf: use 'ep_match' gadget callback

[Sergei Shtylyov]

Hello.

On 7/14/2015 12:39 PM, Robert Baldyga wrote:

> If gadget has set 'ep_match' callback we prefer to call it first to allow
> UDC driver to find the best matching endpoint basing on chip-specific "best
> usage" knowledge.

> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> ---
>   drivers/usb/gadget/epautoconf.c | 6 ++++++
>   1 file changed, 6 insertions(+)

> diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
> index ee0d4e6..92a1a4c 100644
> --- a/drivers/usb/gadget/epautoconf.c
> +++ b/drivers/usb/gadget/epautoconf.c
> @@ -165,6 +165,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
>
>   	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
>
> +	if (gadget->ops->match_ep) {
> +		ep = gadget->ops->match_ep(gadget, desc, ep_comp);
> +		if (ep)
> +			goto found_ep;
> +	}
> +

    I think this patch should be merged with the previous one.

[...]

WBR, Sergei

Re: [PATCH v2 47/48] usb: musb: gadget: add musb_match_ep() function

[Sergei Shtylyov]

Hello.

On 7/14/2015 12:39 PM, Robert Baldyga wrote:

> Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
> process. Functions does the same that was done by chip-specific code inside
> of epautoconf. Now this code can be removed from there to separate generic code
> from platform specific logic.

> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>

[...]
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 043248a..5f1eb35 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -1684,6 +1684,49 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
>   	return 0;
>   }
>
> +#ifdef CONFIG_BLACKFIN
> +static struct usb_ep *musb_find_ep(struct usb_gadget *g,
> +		const char *name)
> +{
> +	struct usb_ep *ep;
> +
> +	list_for_each_entry(ep, &g->ep_list, ep_list) {
> +		if (0 == strcmp(ep->name, name))

    Please make the immediate value the 2nd operand of ==.

> +			return ep;
> +	}
> +
> +	return NULL;
> +}
> +
> +static struct usb_ep *match_match_ep(struct usb_gadget *g,
> +		struct usb_endpoint_descriptor *desc,
> +		struct usb_ss_ep_comp_descriptor *ep_comp)
> +{
> +	struct usb_ep *ep = NULL;
> +	u8 type = usb_endpoint_type(desc);
> +
> +	if ((USB_ENDPOINT_XFER_BULK == type) ||
> +			(USB_ENDPOINT_XFER_ISOC == type)) {

    Likewise.

> +		if (USB_DIR_IN & desc->bEndpointAddress)

    The same about &.

> +			ep = musb_find_ep(g, "ep5in");
> +		else
> +			ep = musb_find_ep(g, "ep6out");
> +	} else if (USB_ENDPOINT_XFER_INT == type) {

    Likewise.

> +		if (USB_DIR_IN & desc->bEndpointAddress)
> +			ep = musb_find_ep(g, "ep1in");
> +		else
> +			ep = musb_find_ep(g, "ep2out");
> +	}

    This string of *if* statements is asking to be *switch* instead.

[...]

WBR, Sergei

Re: [PATCH v2 45/48] usb: gadget: net2280: add net2280_match_ep() function

[Sergei Shtylyov]

Hello.

On 7/14/2015 12:39 PM, Robert Baldyga wrote:

> Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
> process. Functions does the same that was done by chip-specific code inside
> of epautoconf. Now this code can be removed from there to separate generic code
> from platform specific logic.

> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>

[...]
> diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
> index 0295cf7..4933321 100644
> --- a/drivers/usb/gadget/udc/net2280.c
> +++ b/drivers/usb/gadget/udc/net2280.c
> @@ -1533,6 +1533,49 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
>   	return 0;
>   }
>
> +static struct usb_ep *net2280_find_ep(struct usb_gadget *_gadget,
> +		const char *name)

    Shouldn't this be a generic function as before?

> +{
> +	struct usb_ep *ep;
> +
> +	list_for_each_entry(ep, &_gadget->ep_list, ep_list) {
> +		if (0 == strcmp(ep->name, name))

    Please make 0 the 2nd operand to ==.

> +			return ep;
> +	}
> +
> +	return NULL;
> +}
[...]

WBR, Sergei

Re: [PATCH v2 48/48] usb: gadget: epautoconf: cleanup dead code

[Sergei Shtylyov]

Hello.

On 7/14/2015 12:39 PM, Robert Baldyga wrote:

> Function find_ep() is no longer needed here, so we can remove it.
> We also don't use anything from gadget_chips.h header any longer.

> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> ---
>   drivers/usb/gadget/epautoconf.c | 14 --------------
>   1 file changed, 14 deletions(-)

> diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
> index e9a8682..9a80925 100644
> --- a/drivers/usb/gadget/epautoconf.c
> +++ b/drivers/usb/gadget/epautoconf.c
> @@ -20,20 +20,6 @@
>   #include <linux/usb/ch9.h>
>   #include <linux/usb/gadget.h>
>
> -#include "gadget_chips.h"
> -
> -static struct usb_ep *
> -find_ep (struct usb_gadget *gadget, const char *name)
> -{
> -	struct usb_ep	*ep;
> -
> -	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
> -		if (0 == strcmp (ep->name, name))
> -			return ep;
> -	}
> -	return NULL;
> -}
> -

    I don't think duplicating the function in each driver that needs it is 
better than turniong this function into public.

WBR, Sergei