From: Feng Wu <feng.wu@intel.com>
To: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org,
mtosatti@redhat.com
Cc: eric.auger@linaro.org, kvm@vger.kernel.org,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
Feng Wu <feng.wu@intel.com>
Subject: [PATCH v8 06/13] vfio: Register/unregister irq_bypass_producer
Date: Wed, 16 Sep 2015 16:50:02 +0800 [thread overview]
Message-ID: <1442393409-2623-7-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1442393409-2623-1-git-send-email-feng.wu@intel.com>
This patch adds the registration/unregistration of an
irq_bypass_producer for MSI/MSIx on vfio pci devices.
Signed-off-by: Feng Wu <feng.wu@intel.com>
---
v8:
- Merge "[PATCH v7 08/17] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices"
into this patch.
v6:
- Make the add_consumer and del_consumer callbacks static
- Remove pointless INIT_LIST_HEAD to 'vdev->ctx[vector].producer.node)'
- Use dev_info instead of WARN_ON() when irq_bypass_register_producer fails
- Remove optional dummy callbacks for irq producer
drivers/vfio/pci/Kconfig | 1 +
drivers/vfio/pci/vfio_pci_intrs.c | 9 +++++++++
drivers/vfio/pci/vfio_pci_private.h | 2 ++
3 files changed, 12 insertions(+)
diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
index 579d83b..02912f1 100644
--- a/drivers/vfio/pci/Kconfig
+++ b/drivers/vfio/pci/Kconfig
@@ -2,6 +2,7 @@ config VFIO_PCI
tristate "VFIO support for PCI devices"
depends on VFIO && PCI && EVENTFD
select VFIO_VIRQFD
+ select IRQ_BYPASS_MANAGER
help
Support for the PCI VFIO bus driver. This is required to make
use of PCI drivers using the VFIO framework.
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 1f577b4..c65299d 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -319,6 +319,7 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
if (vdev->ctx[vector].trigger) {
free_irq(irq, vdev->ctx[vector].trigger);
+ irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
kfree(vdev->ctx[vector].name);
eventfd_ctx_put(vdev->ctx[vector].trigger);
vdev->ctx[vector].trigger = NULL;
@@ -360,6 +361,14 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
return ret;
}
+ vdev->ctx[vector].producer.token = trigger;
+ vdev->ctx[vector].producer.irq = irq;
+ ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
+ if (unlikely(ret))
+ dev_info(&pdev->dev,
+ "irq bypass producer (token %p) registeration fails: %d\n",
+ vdev->ctx[vector].producer.token, ret);
+
vdev->ctx[vector].trigger = trigger;
return 0;
diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
index ae0e1b4..0e7394f 100644
--- a/drivers/vfio/pci/vfio_pci_private.h
+++ b/drivers/vfio/pci/vfio_pci_private.h
@@ -13,6 +13,7 @@
#include <linux/mutex.h>
#include <linux/pci.h>
+#include <linux/irqbypass.h>
#ifndef VFIO_PCI_PRIVATE_H
#define VFIO_PCI_PRIVATE_H
@@ -29,6 +30,7 @@ struct vfio_pci_irq_ctx {
struct virqfd *mask;
char *name;
bool masked;
+ struct irq_bypass_producer producer;
};
struct vfio_pci_device {
--
2.1.0
next prev parent reply other threads:[~2015-09-16 9:04 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-16 8:49 [PATCH v8 00/13] Add VT-d Posted-Interrupts support Feng Wu
2015-09-16 8:49 ` [PATCH v8 01/13] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-09-16 8:49 ` [PATCH v8 02/13] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-09-16 8:49 ` [PATCH v8 03/13] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-09-16 9:23 ` Paolo Bonzini
2015-09-17 3:17 ` Wu, Feng
2015-09-17 9:42 ` Paolo Bonzini
2015-09-17 13:36 ` Wu, Feng
2015-09-17 14:24 ` Paolo Bonzini
2015-09-17 15:58 ` Radim Krčmář
2015-09-17 16:00 ` Paolo Bonzini
2015-09-17 23:18 ` Wu, Feng
2015-09-18 16:16 ` Radim Krčmář
2015-09-18 16:17 ` Paolo Bonzini
2015-09-17 23:15 ` Wu, Feng
2015-09-16 8:50 ` [PATCH v8 04/13] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-09-16 8:50 ` [PATCH v8 05/13] KVM: make kvm_set_msi_irq() public Feng Wu
2015-09-16 8:50 ` Feng Wu [this message]
2015-09-16 8:50 ` [PATCH v8 07/13] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-09-16 8:50 ` [PATCH v8 08/13] KVM: Implement IRQ bypass consumer callbacks for x86 Feng Wu
2015-09-16 8:50 ` [PATCH v8 09/13] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-09-16 9:27 ` Paolo Bonzini
2015-09-17 1:51 ` Wu, Feng
2015-09-17 9:38 ` Paolo Bonzini
2015-09-16 8:50 ` [PATCH v8 10/13] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-09-16 9:29 ` Paolo Bonzini
2015-09-16 8:50 ` [PATCH v8 11/13] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-09-16 9:32 ` Paolo Bonzini
2015-09-16 8:50 ` [PATCH v8 12/13] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-09-16 9:32 ` Paolo Bonzini
2015-09-16 8:50 ` [PATCH v8 13/13] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
2015-09-16 9:34 ` [PATCH v8 00/13] Add VT-d Posted-Interrupts support Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442393409-2623-7-git-send-email-feng.wu@intel.com \
--to=feng.wu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).