From: Feng Wu <feng.wu@intel.com>
To: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org,
mtosatti@redhat.com
Cc: eric.auger@linaro.org, kvm@vger.kernel.org,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
Feng Wu <feng.wu@intel.com>
Subject: [PATCH v9 14/18] KVM: Implement IRQ bypass consumer callbacks for x86
Date: Fri, 18 Sep 2015 22:29:52 +0800 [thread overview]
Message-ID: <1442586596-5920-15-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1442586596-5920-1-git-send-email-feng.wu@intel.com>
Implement the following callbacks for x86:
- kvm_arch_irq_bypass_add_producer
- kvm_arch_irq_bypass_del_producer
- kvm_arch_irq_bypass_stop: dummy callback
- kvm_arch_irq_bypass_resume: dummy callback
and set CONFIG_HAVE_KVM_IRQ_BYPASS for x86.
Signed-off-by: Feng Wu <feng.wu@intel.com>
---
v8:
- Move the weak irq bypas stop and irq bypass start to this patch.
- Call kvm_x86_ops->update_pi_irte() instead of kvm_arch_update_pi_irte().
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/Kconfig | 1 +
arch/x86/kvm/x86.c | 44 +++++++++++++++++++++++++++++++++++++++++
virt/kvm/eventfd.c | 12 +++++++++++
4 files changed, 58 insertions(+)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 8c44286..0ddd353 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -24,6 +24,7 @@
#include <linux/perf_event.h>
#include <linux/pvclock_gtod.h>
#include <linux/clocksource.h>
+#include <linux/irqbypass.h>
#include <asm/pvclock-abi.h>
#include <asm/desc.h>
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index c951d44..b90776f 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -30,6 +30,7 @@ config KVM
select HAVE_KVM_IRQCHIP
select HAVE_KVM_IRQFD
select IRQ_BYPASS_MANAGER
+ select HAVE_KVM_IRQ_BYPASS
select HAVE_KVM_IRQ_ROUTING
select HAVE_KVM_EVENTFD
select KVM_APIC_ARCHITECTURE
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 9dcd501..79dac02 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -50,6 +50,8 @@
#include <linux/pci.h>
#include <linux/timekeeper_internal.h>
#include <linux/pvclock_gtod.h>
+#include <linux/kvm_irqfd.h>
+#include <linux/irqbypass.h>
#include <trace/events/kvm.h>
#define CREATE_TRACE_POINTS
@@ -8249,6 +8251,48 @@ bool kvm_arch_has_noncoherent_dma(struct kvm *kvm)
}
EXPORT_SYMBOL_GPL(kvm_arch_has_noncoherent_dma);
+int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
+ struct irq_bypass_producer *prod)
+{
+ struct kvm_kernel_irqfd *irqfd =
+ container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+ if (kvm_x86_ops->update_pi_irte) {
+ irqfd->producer = prod;
+ return kvm_x86_ops->update_pi_irte(irqfd->kvm,
+ prod->irq, irqfd->gsi, 1);
+ }
+
+ return -EINVAL;
+}
+
+void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
+ struct irq_bypass_producer *prod)
+{
+ int ret;
+ struct kvm_kernel_irqfd *irqfd =
+ container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+ if (!kvm_x86_ops->update_pi_irte) {
+ WARN_ON(irqfd->producer != NULL);
+ return;
+ }
+
+ WARN_ON(irqfd->producer != prod);
+ irqfd->producer = NULL;
+
+ /*
+ * When producer of consumer is unregistered, we change back to
+ * remapped mode, so we can re-use the current implementation
+ * when the irq is masked/disabed or the consumer side (KVM
+ * int this case doesn't want to receive the interrupts.
+ */
+ ret = kvm_x86_ops->update_pi_irte(irqfd->kvm, prod->irq, irqfd->gsi, 0);
+ if (ret)
+ printk(KERN_INFO "irq bypass consumer (token %p) unregistration"
+ " fails: %d\n", irqfd->consumer.token, ret);
+}
+
EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index d7a230f..c0a56a1 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -256,6 +256,18 @@ static void irqfd_update(struct kvm *kvm, struct kvm_kernel_irqfd *irqfd)
write_seqcount_end(&irqfd->irq_entry_sc);
}
+#ifdef CONFIG_HAVE_KVM_IRQ_BYPASS
+void __attribute__((weak)) kvm_arch_irq_bypass_stop(
+ struct irq_bypass_consumer *cons)
+{
+}
+
+void __attribute__((weak)) kvm_arch_irq_bypass_start(
+ struct irq_bypass_consumer *cons)
+{
+}
+#endif
+
static int
kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
{
--
2.1.0
next prev parent reply other threads:[~2015-09-18 14:47 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 14:29 [PATCH v9 00/18] Add VT-d Posted-Interrupts support - including prerequisite series Feng Wu
2015-09-18 14:29 ` [PATCH v9 01/18] virt: IRQ bypass manager Feng Wu
2015-09-18 15:34 ` Wu, Feng
2015-09-18 14:29 ` [PATCH v9 02/18] KVM: x86: select IRQ_BYPASS_MANAGER Feng Wu
2015-09-18 14:29 ` [PATCH v9 03/18] KVM: arm/arm64: " Feng Wu
2015-09-21 19:32 ` Eric Auger
2015-09-18 14:29 ` [PATCH v9 04/18] KVM: create kvm_irqfd.h Feng Wu
2015-09-18 15:35 ` Wu, Feng
2015-09-18 14:29 ` [PATCH v9 05/18] KVM: introduce kvm_arch functions for IRQ bypass Feng Wu
2015-09-18 14:29 ` [PATCH v9 06/18] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-09-18 14:29 ` [PATCH v9 07/18] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-09-18 14:29 ` [PATCH v9 08/18] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-09-18 14:29 ` [PATCH v9 09/18] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-09-18 14:29 ` [PATCH v9 10/18] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-09-18 14:29 ` [PATCH v9 11/18] KVM: make kvm_set_msi_irq() public Feng Wu
2015-09-18 14:29 ` [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-09-18 17:19 ` Alex Williamson
2015-09-21 8:56 ` Wu, Feng
2015-09-21 9:32 ` Paolo Bonzini
2015-09-21 11:35 ` Wu, Feng
2015-09-21 12:06 ` Paolo Bonzini
2015-09-21 12:08 ` Wu, Feng
2015-09-21 12:53 ` Wu, Feng
2015-09-21 13:02 ` Paolo Bonzini
2015-09-21 19:46 ` Eric Auger
2016-04-26 20:08 ` Alex Williamson
2016-04-27 1:32 ` Wu, Feng
2016-04-28 16:40 ` Alex Williamson
2016-04-28 15:35 ` Eric Auger
2015-09-18 14:29 ` [PATCH v9 13/18] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-09-18 14:29 ` Feng Wu [this message]
2015-09-18 14:29 ` [PATCH v9 15/18] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-09-18 14:29 ` [PATCH v9 16/18] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-09-18 14:29 ` [PATCH v9 17/18] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-09-18 16:06 ` Paolo Bonzini
2015-09-19 7:11 ` Wu, Feng
2015-09-21 2:16 ` Wu, Feng
2015-09-21 5:32 ` Paolo Bonzini
2015-09-21 5:45 ` Wu, Feng
2015-10-14 23:41 ` David Matlack
2015-10-15 1:33 ` Wu, Feng
2015-10-15 17:39 ` David Matlack
2015-10-15 18:13 ` Paolo Bonzini
2015-10-16 1:45 ` Wu, Feng
2015-09-18 14:29 ` [PATCH v9 18/18] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
2015-09-21 13:46 ` Joerg Roedel
2015-09-18 14:58 ` [PATCH v9 00/18] Add VT-d Posted-Interrupts support - including prerequisite series Paolo Bonzini
2015-09-18 15:08 ` Wu, Feng
2015-09-18 15:21 ` Paolo Bonzini
2015-09-18 15:38 ` Wu, Feng
2015-09-18 17:57 ` Alex Williamson
2015-09-25 1:49 ` Wu, Feng
2015-09-25 11:14 ` Paolo Bonzini
2015-09-28 10:14 ` Wu, Feng
2015-09-28 10:18 ` Paolo Bonzini
2015-09-28 10:22 ` Wu, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442586596-5920-15-git-send-email-feng.wu@intel.com \
--to=feng.wu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).