From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756533AbbIUJiQ (ORCPT ); Mon, 21 Sep 2015 05:38:16 -0400 Received: from down.free-electrons.com ([37.187.137.238]:54198 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755990AbbIUJeG (ORCPT ); Mon, 21 Sep 2015 05:34:06 -0400 From: Boris Brezillon To: Thierry Reding , linux-pwm@vger.kernel.org, Mark Brown , Liam Girdwood , Jingoo Han , Lee Jones , linux-fbdev@vger.kernel.org, Bryan Wu , Richard Purdie , Jacek Anaszewski , linux-leds@vger.kernel.org, Maxime Ripard , linux-sunxi@googlegroups.com, Heiko Stuebner , linux-rockchip@lists.infradead.org, Jean-Christophe Plagniol-Villard , Tomi Valkeinen , Daniel Mack , Haojian Zhuang , Robert Jarzmik Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Doug Anderson , =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= , Boris Brezillon Subject: [PATCH v3 04/12] backlight: pwm_bl: remove useless call to pwm_set_period Date: Mon, 21 Sep 2015 11:33:21 +0200 Message-Id: <1442828009-6241-5-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1442828009-6241-1-git-send-email-boris.brezillon@free-electrons.com> References: <1442828009-6241-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The PWM period will be set when calling pwm_config. Remove this useless call to pwm_set_period, which might mess up with the initial PWM state once we have added proper support for PWM init state retrieval. Signed-off-by: Boris Brezillon --- drivers/video/backlight/pwm_bl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index ae498c1..71944f8 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -293,12 +293,14 @@ static int pwm_backlight_probe(struct platform_device *pdev) * period, parsed from the DT, in the PWM device. For the non-DT case, * set the period from platform data if it has not already been set * via the PWM lookup table. + * FIXME: This assignment should be dropped as soon as all the boards + * have moved to the PWM lookup table approach. The same goes for the + * pb->period field which should be replaced by + * pwm_get_default_period() calls. */ pb->period = pwm_get_default_period(pb->pwm); - if (!pb->period && (data->pwm_period_ns > 0)) { + if (!pb->period && (data->pwm_period_ns > 0)) pb->period = data->pwm_period_ns; - pwm_set_period(pb->pwm, data->pwm_period_ns); - } pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale); -- 1.9.1