From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752921AbbJEQmv (ORCPT ); Mon, 5 Oct 2015 12:42:51 -0400 Received: from smtp.csie.ntu.edu.tw ([140.112.30.61]:44608 "EHLO smtp.csie.ntu.edu.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752705AbbJEQmt (ORCPT ); Mon, 5 Oct 2015 12:42:49 -0400 From: Chen-Yu Tsai To: Thomas Gleixner , Jason Cooper , Marc Zyngier , Maxime Ripard Cc: Chen-Yu Tsai , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/2] irqchip: sunxi-nmi: misc. / aesthetic improvements Date: Tue, 6 Oct 2015 00:42:12 +0800 Message-Id: <1444063334-19832-1-git-send-email-wens@csie.org> X-Mailer: git-send-email 2.5.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone, This is v2 of my sunxi-nmi aesthetic improvement series. sunxi-nmi uses its DT node name, which is normally "interrupt-controller", as its irqchip name. This only serves to confuse the user when one sees "interrupt-controller" in /sys/kernel/debug/irq_domain_mapping or /proc/interrupts. We want it to show something more specific, like "sunxi-nmi". Also do this for the printk calls. While at it, also switch to the new of_io_request_and_map() call, so the IO resource is properly held, and also shows up in /proc/iomem. Changes since v1: - Use the "pr_fmt" macro in patch 1, and also remove __func__ from the error message in the interrupt type setter, sunxi_sc_nmi_set_type(). - Update the commit message of patch 1 to reflect the change above. - Add a proper commit message for patch 2. Regards ChenYu Chen-Yu Tsai (2): irqchip: sunxi-nmi: Use driver name instead of DT node name for identification irqchip: sunxi-nmi: switch to of_io_request_and_map() from of_iomap() drivers/irqchip/irq-sunxi-nmi.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) -- 2.5.3