LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Douglas Anderson <dianders@chromium.org>
To: John Youn <John.Youn@synopsys.com>, balbi@ti.com
Cc: "Yunzhi Li" <lyz@rock-chips.com>,
	"Heiko Stübner" <heiko@sntech.de>,
	linux-rockchip@lists.infradead.org,
	"Julius Werner" <jwerner@chromium.org>,
	gregory.herrero@intel.com, yousaf.kaukab@intel.com,
	dinguyen@opensource.altera.com,
	"Doug Anderson" <dianders@chromium.org>,
	johnyoun@synopsys.com, gregkh@linuxfoundation.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3] usb: dwc2: host: Fix use after free w/ simultaneous irqs
Date: Fri, 16 Oct 2015 14:59:25 -0700
Message-ID: <1445032765-17342-1-git-send-email-dianders@chromium.org> (raw)

From: Doug Anderson <dianders@chromium.org>

While plugging / unplugging on a DWC2 host port with "slub_debug=FZPUA"
enabled, I found a crash that was quite obviously a use after free.

It appears that in some cases when we handle the various sub-cases of
HCINT we may end up freeing the QTD.  If there is more than one bit set
in HCINT we may then end up continuing to use the QTD, which is bad.
Let's be paranoid and check for this after each sub-case.  This should
be safe since we officially have the "hsotg->lock" (it was grabbed in
dwc2_handle_hcd_intr).

The specific crash I found was:
 Unable to handle kernel paging request at virtual address 6b6b6b9f

At the time of the crash, the kernel reported:
 (dwc2_hc_nak_intr+0x5c/0x198)
 (dwc2_handle_hcd_intr+0xa84/0xbf8)
 (_dwc2_hcd_irq+0x1c/0x20)
 (usb_hcd_irq+0x34/0x48)

Popping into kgdb found that "*qtd" was filled with "0x6b", AKA qtd had
been freed and filled with slub_debug poison.

kgdb gave a little better stack crawl:
 0 dwc2_hc_nak_intr (hsotg=hsotg@entry=0xec42e058,
     chan=chan@entry=0xec546dc0, chnum=chnum@entry=4,
     qtd=qtd@entry=0xec679600) at drivers/usb/dwc2/hcd_intr.c:1237
 1 dwc2_hc_n_intr (chnum=4, hsotg=0xec42e058) at
     drivers/usb/dwc2/hcd_intr.c:2041
 2 dwc2_hc_intr (hsotg=0xec42e058) at drivers/usb/dwc2/hcd_intr.c:2078
 3 dwc2_handle_hcd_intr (hsotg=0xec42e058) at
     drivers/usb/dwc2/hcd_intr.c:2128
 4 _dwc2_hcd_irq (hcd=<optimized out>) at drivers/usb/dwc2/hcd.c:2837
 5 usb_hcd_irq (irq=<optimized out>, __hcd=<optimized out>) at
     drivers/usb/core/hcd.c:2353

Popping up to frame #1 (dwc2_hc_n_intr) found:
 (gdb) print /x hcint
 $12 = 0x12

AKA:
 #define HCINTMSK_CHHLTD  (1 << 1)
 #define HCINTMSK_NAK     (1 << 4)

Further debugging found that by simulating receiving those two
interrupts at the same time it was trivial to replicate the
use-after-free.  See <http://crosreview.com/305712> for a patch and
instructions.  This lead to getting the following stack crawl of the
actual free:
 0  arch_kgdb_breakpoint () at arch/arm/include/asm/outercache.h:103
 1  kgdb_breakpoint () at kernel/debug/debug_core.c:1054
 2  dwc2_hcd_qtd_unlink_and_free (hsotg=<optimized out>, qh=<optimized
      out>, qtd=0xe4479a00) at drivers/usb/dwc2/hcd.h:488
 3  dwc2_deactivate_qh (free_qtd=<optimized out>, qh=0xe5efa280,
      hsotg=0xed424618) at drivers/usb/dwc2/hcd_intr.c:671
 4  dwc2_release_channel (hsotg=hsotg@entry=0xed424618,
      chan=chan@entry=0xed5be000, qtd=<optimized out>,
      halt_status=<optimized out>) at drivers/usb/dwc2/hcd_intr.c:742
 5  dwc2_halt_channel (hsotg=0xed424618, chan=0xed5be000, qtd=<optimized
      out>, halt_status=<optimized out>) at
      drivers/usb/dwc2/hcd_intr.c:804
 6  dwc2_complete_non_periodic_xfer (chnum=<optimized out>,
      halt_status=<optimized out>, qtd=<optimized out>, chan=<optimized
      out>, hsotg=<optimized out>) at drivers/usb/dwc2/hcd_intr.c:889
 7  dwc2_hc_xfercomp_intr (hsotg=hsotg@entry=0xed424618,
      chan=chan@entry=0xed5be000, chnum=chnum@entry=6,
      qtd=qtd@entry=0xe4479a00) at drivers/usb/dwc2/hcd_intr.c:1065
 8  dwc2_hc_chhltd_intr_dma (qtd=0xe4479a00, chnum=6, chan=0xed5be000,
      hsotg=0xed424618) at drivers/usb/dwc2/hcd_intr.c:1823
 9  dwc2_hc_chhltd_intr (qtd=0xe4479a00, chnum=6, chan=0xed5be000,
      hsotg=0xed424618) at drivers/usb/dwc2/hcd_intr.c:1944
 10 dwc2_hc_n_intr (chnum=6, hsotg=0xed424618) at
      drivers/usb/dwc2/hcd_intr.c:2052
 11 dwc2_hc_intr (hsotg=0xed424618) at drivers/usb/dwc2/hcd_intr.c:2097
 12 dwc2_handle_hcd_intr (hsotg=0xed424618) at
      drivers/usb/dwc2/hcd_intr.c:2147
 13 _dwc2_hcd_irq (hcd=<optimized out>) at drivers/usb/dwc2/hcd.c:2837
 14 usb_hcd_irq (irq=<optimized out>, __hcd=<optimized out>) at
      drivers/usb/core/hcd.c:2353

Though we could add specific code to handle this case, adding the
general purpose code to check for all cases where qtd might be freed
seemed safer.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v3:
- Don't pass NULL if qtd freed, just return (John Youn)
- Don't keep track of interrupts left: list_first_entry() is fast.

Changes in v2:
- Add static as correctly pointed by kbuild test robot

 drivers/usb/dwc2/hcd_intr.c | 67 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 57 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index f70c970..6d0cd368 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -1949,6 +1949,21 @@ static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg,
 	}
 }
 
+/*
+ * Check if the given qtd is still the top of the list (and thus valid).
+ *
+ * If dwc2_hcd_qtd_unlink_and_free() has been called since we grabbed
+ * the qtd from the top of the list, this will return false (otherwise true).
+ */
+static bool dwc2_check_qtd_still_ok(struct dwc2_qtd *qtd,
+				    struct list_head *qtd_list)
+{
+	struct dwc2_qtd *cur_head;
+
+	cur_head = list_first_entry(qtd_list, struct dwc2_qtd, qtd_list_entry);
+	return (cur_head == qtd);
+}
+
 /* Handles interrupt for a specific Host Channel */
 static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum)
 {
@@ -2031,27 +2046,59 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum)
 		 */
 		hcint &= ~HCINTMSK_NYET;
 	}
-	if (hcint & HCINTMSK_CHHLTD)
+
+	if (hcint & HCINTMSK_CHHLTD) {
 		dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_AHBERR)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_AHBERR) {
 		dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_STALL)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_STALL) {
 		dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_NAK)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_NAK) {
 		dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_ACK)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_ACK) {
 		dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_NYET)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_NYET) {
 		dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_XACTERR)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_XACTERR) {
 		dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_BBLERR)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_BBLERR) {
 		dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_FRMOVRUN)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_FRMOVRUN) {
 		dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
-	if (hcint & HCINTMSK_DATATGLERR)
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
+	if (hcint & HCINTMSK_DATATGLERR) {
 		dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd);
+		if (!dwc2_check_qtd_still_ok(qtd, &chan->qh->qtd_list))
+			goto exit;
+	}
 
+exit:
 	chan->hcint = 0;
 }
 
-- 
2.6.0.rc2.230.g3dd15c0


             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-16 21:59 Douglas Anderson [this message]
2015-10-16 22:57 ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445032765-17342-1-git-send-email-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=John.Youn@synopsys.com \
    --cc=balbi@ti.com \
    --cc=dinguyen@opensource.altera.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gregory.herrero@intel.com \
    --cc=heiko@sntech.de \
    --cc=johnyoun@synopsys.com \
    --cc=jwerner@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lyz@rock-chips.com \
    --cc=yousaf.kaukab@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git