From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: "Sudeep Holla" <sudeep.holla@arm.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
linux-omap@vger.kernel.org
Subject: [PATCH 15/19] ARM: dts: omap: replace legacy *,wakeup property with wakeup-source
Date: Wed, 21 Oct 2015 11:10:12 +0100 [thread overview]
Message-ID: <1445422216-29375-16-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1445422216-29375-1-git-send-email-sudeep.holla@arm.com>
Though the keyboard and other driver will continue to support the legacy
"gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup
source, "wakeup-source" is the new standard binding.
This patch replaces all the legacy wakeup properties with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 8 ++---
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap3-ldp.dts | 18 ++++++------
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 10 +++----
arch/arm/boot/dts/omap3-overo-alto35-common.dtsi | 2 +-
.../boot/dts/omap3-overo-chestnut43-common.dtsi | 4 +--
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi | 4 +--
arch/arm/boot/dts/omap3-overo-palo35-common.dtsi | 4 +--
arch/arm/boot/dts/omap3-overo-palo43-common.dtsi | 4 +--
arch/arm/boot/dts/omap3-pandora-common.dtsi | 34 +++++++++++-----------
.../boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 2 +-
arch/arm/boot/dts/omap4-duovero-parlor.dts | 2 +-
arch/arm/boot/dts/omap4-var-om44customboard.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
22 files changed, 57 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 91146c318798..caeb3b076042 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -23,28 +23,28 @@
label = "sysboot2";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
linux,code = <BTN_0>;
- gpio-key,wakeup;
+ wakeup-source;
};
sysboot5 {
label = "sysboot5";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
linux,code = <BTN_1>;
- gpio-key,wakeup;
+ wakeup-source;
};
gpio1 {
label = "gpio1";
gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
linux,code = <BTN_2>;
- gpio-key,wakeup;
+ wakeup-source;
};
gpio2 {
label = "gpio2";
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
linux,code = <BTN_3>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 7c4dca122a91..f0e2cf3c9e89 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -69,7 +69,7 @@
label = "user";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
linux,code = <0x114>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 67659a0ed13e..de5138e61ddc 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -80,7 +80,7 @@
label = "user";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,code = <0x114>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 4d091ca43e25..5ec6491d7933 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -238,7 +238,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 9ca2865a83d6..86850bb311eb 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -64,7 +64,7 @@
label = "user";
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_EXTRA>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index e84184de2a4a..2476d3accee0 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -68,6 +68,6 @@
ti,keep-vref-on = <1>;
ti,settle-delay-usec = /bits/ 16 <150>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7166d8876ea8..d780ea16a0a3 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -37,7 +37,7 @@
label = "aux";
linux,code = <169>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index bd6e6769c7ce..3198dafffb7a 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -35,63 +35,63 @@
label = "enter";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
linux,code = <KEY_ENTER>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f1 {
label = "f1";
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
linux,code = <KEY_F1>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f2 {
label = "f2";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
linux,code = <KEY_F2>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f3 {
label = "f3";
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
linux,code = <KEY_F3>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f4 {
label = "f4";
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
linux,code = <KEY_F4>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_left {
label = "left";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
linux,code = <KEY_LEFT>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_right {
label = "right";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
linux,code = <KEY_RIGHT>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_up {
label = "up";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
linux,code = <KEY_UP>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_down {
label = "down";
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index d0dd0365bfda..f0484cedd0bc 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -327,7 +327,7 @@
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3d5b64..c146f42313cb 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -67,28 +67,28 @@
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
- gpio-key,wakeup;
+ wakeup-source;
};
camera_focus {
label = "Camera Focus";
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
- gpio-key,wakeup;
+ wakeup-source;
};
camera_capture {
label = "Camera Capture";
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
linux,code = <0xd4>; /* KEY_CAMERA */
- gpio-key,wakeup;
+ wakeup-source;
};
lock_button {
label = "Lock Button";
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
linux,code = <0x98>; /* KEY_SCREENLOCK */
- gpio-key,wakeup;
+ wakeup-source;
};
keypad_slide {
@@ -96,7 +96,7 @@
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
- gpio-key,wakeup;
+ wakeup-source;
};
proximity_sensor {
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 7aae8fb82c1f..3b3a75997f81 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -48,7 +48,7 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 17b82f82638a..7df27926ead2 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 80d236ac64a5..2bbc2bd30b81 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -161,6 +161,6 @@
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 048fd216970a..d19a2f293c97 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -172,7 +172,7 @@
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 49d2254a99b0..250cc7fe5d5e 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 680d7262399c..8df7ec35d17d 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 087aedf5b902..0ea2c451c809 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index f2084e6d01e7..a5827c7ba1af 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -84,112 +84,112 @@
label = "up";
linux,code = <KEY_UP>;
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
- gpio-key,wakeup;
+ wakeup-source;
};
down-button {
label = "down";
linux,code = <KEY_DOWN>;
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-button {
label = "left";
linux,code = <KEY_LEFT>;
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-button {
label = "right";
linux,code = <KEY_RIGHT>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
- gpio-key,wakeup;
+ wakeup-source;
};
pageup-button {
label = "game 1";
linux,code = <KEY_PAGEUP>;
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
- gpio-key,wakeup;
+ wakeup-source;
};
pagedown-button {
label = "game 3";
linux,code = <KEY_PAGEDOWN>;
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
- gpio-key,wakeup;
+ wakeup-source;
};
home-button {
label = "game 4";
linux,code = <KEY_HOME>;
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
- gpio-key,wakeup;
+ wakeup-source;
};
end-button {
label = "game 2";
linux,code = <KEY_END>;
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-shift {
label = "l";
linux,code = <KEY_RIGHTSHIFT>;
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
- gpio-key,wakeup;
+ wakeup-source;
};
kp-plus {
label = "l2";
linux,code = <KEY_KPPLUS>;
gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-ctrl {
label = "r";
linux,code = <KEY_RIGHTCTRL>;
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
- gpio-key,wakeup;
+ wakeup-source;
};
kp-minus {
label = "r2";
linux,code = <KEY_KPMINUS>;
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-ctrl {
label = "ctrl";
linux,code = <KEY_LEFTCTRL>;
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
- gpio-key,wakeup;
+ wakeup-source;
};
menu {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
- gpio-key,wakeup;
+ wakeup-source;
};
hold {
label = "hold";
linux,code = <KEY_COFFEE>;
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-alt {
label = "alt";
linux,code = <KEY_LEFTALT>;
gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
- gpio-key,wakeup;
+ wakeup-source;
};
lid {
@@ -617,7 +617,7 @@
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
lcd: lcd@1 {
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index f4b1a61853e3..157345bb8e79 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -66,6 +66,6 @@
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1a78f013f37a..ab17b9929250 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -36,7 +36,7 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index f2d2fdb75628..6e278d7716a5 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -41,7 +41,7 @@
label = "user";
gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
linux,code = <BTN_EXTRA>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 61ad2ea34720..95c5523c1230 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -359,7 +359,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
--
1.9.1
next prev parent reply other threads:[~2015-10-21 10:12 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 10:09 [PATCH 00/19] devicetree: standardize/consolidate on "wakeup-source" property Sudeep Holla
2015-10-21 10:09 ` [PATCH 01/19] Documentation: " Sudeep Holla
2015-10-21 22:02 ` Rob Herring
2015-10-21 10:09 ` [PATCH 02/19] Documentation: devicetree: fix reference to legacy wakeup properties Sudeep Holla
2015-10-21 22:04 ` Rob Herring
2015-10-28 18:23 ` Sudeep Holla
2015-10-30 18:29 ` Rob Herring
2015-10-21 10:10 ` [PATCH 03/19] rtc: opal: enable support for the stardard "wakeup-source" property Sudeep Holla
2015-10-27 22:53 ` Alexandre Belloni
2015-10-21 10:10 ` [PATCH 04/19] rtc: isl12057: enable support for the standard " Sudeep Holla
2015-10-27 22:53 ` Alexandre Belloni
2015-10-21 10:10 ` [PATCH 05/19] mmc: core/host: " Sudeep Holla
2015-11-19 11:32 ` Ulf Hansson
2015-10-21 10:10 ` [PATCH 06/19] input: tegra-kbc: " Sudeep Holla
2015-10-23 6:39 ` Dmitry Torokhov
2015-10-23 10:23 ` Sudeep Holla
2015-10-26 8:33 ` Dmitry Torokhov
2015-10-21 10:10 ` [PATCH 07/19] ARM: dts: rockchip: replace gpio-key,wakeup with wakeup-source property Sudeep Holla
2015-10-21 10:10 ` [PATCH 08/19] ARM: dts: spear: " Sudeep Holla
2015-10-21 10:10 ` [PATCH 09/19] ARM: dts: am335x: " Sudeep Holla
2015-12-15 16:33 ` Sudeep Holla
2015-12-17 17:58 ` Tony Lindgren
2015-10-21 10:10 ` [PATCH 10/19] ARM: dts: at91: " Sudeep Holla
2015-10-21 10:21 ` Nicolas Ferre
2015-10-21 10:25 ` Sudeep Holla
2015-10-21 11:01 ` Ulf Hansson
2015-10-21 11:13 ` Sudeep Holla
2015-10-21 12:41 ` Sudeep Holla
2015-10-21 15:27 ` Nicolas Ferre
2015-10-21 10:10 ` [PATCH 11/19] ARM: dts: imx: replace legacy *,wakeup property with wakeup-source Sudeep Holla
2015-11-23 5:37 ` Shawn Guo
2015-11-26 11:33 ` Sudeep Holla
2015-12-02 1:54 ` Shawn Guo
2015-12-02 10:05 ` Sudeep Holla
2015-10-21 10:10 ` [PATCH 12/19] ARM: dts: exynos: " Sudeep Holla
2015-12-15 16:35 ` Sudeep Holla
2015-12-15 23:32 ` Krzysztof Kozlowski
2015-12-16 10:32 ` Sudeep Holla
2015-12-16 23:38 ` Krzysztof Kozlowski
2015-12-16 23:49 ` Krzysztof Kozlowski
2016-01-28 8:11 ` Krzysztof Kozlowski
2016-01-28 15:59 ` [UPDATE] " Sudeep Holla
2016-01-29 0:11 ` Krzysztof Kozlowski
2015-10-21 10:10 ` [PATCH 13/19] ARM: dts: tegra: " Sudeep Holla
2015-12-15 16:35 ` Sudeep Holla
2015-12-23 11:24 ` Sudeep Holla
2015-10-21 10:10 ` [PATCH 14/19] ARM: dts: shmobile/r8a7xxx: replace gpio-key,wakeup with wakeup-source property Sudeep Holla
2015-10-21 10:18 ` Geert Uytterhoeven
2015-10-21 10:23 ` Sudeep Holla
2015-10-22 0:50 ` Simon Horman
2015-10-22 9:37 ` Sudeep Holla
2015-10-23 0:18 ` Simon Horman
2015-10-21 10:10 ` Sudeep Holla [this message]
2015-12-15 16:37 ` [PATCH 15/19] ARM: dts: omap: replace legacy *,wakeup property with wakeup-source Sudeep Holla
2015-12-17 17:58 ` Tony Lindgren
2015-10-21 10:10 ` [PATCH 16/19] ARM: dts: s5pv210: " Sudeep Holla
2015-12-15 16:37 ` Sudeep Holla
2015-12-16 23:52 ` Krzysztof Kozlowski
2015-10-21 10:10 ` [PATCH 17/19] ARM: dts: armada: replace isil,irq2-can-wakeup-machine with wakeup-source property Sudeep Holla
2015-12-15 16:39 ` Sudeep Holla
2015-12-15 16:56 ` Gregory CLEMENT
2015-10-21 10:10 ` [PATCH 18/19] ARM: dts: ste: replace legacy *,wakeup property with wakeup-source Sudeep Holla
2015-10-27 12:34 ` Linus Walleij
2015-10-27 12:46 ` Sudeep Holla
2015-11-05 9:26 ` Linus Walleij
2015-10-21 10:10 ` [PATCH 19/19] ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property Sudeep Holla
2015-10-29 8:56 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445422216-29375-16-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).