[PATCH v2 0/6] Add support for the TI TPS65086 PMIC

[PATCH v2 0/6] Add support for the TI TPS65086 PMIC

[Andrew F. Davis]

This series adds support for the TPS65086 PMIC. It is a MFD with an I2C
interface, several regulators and load switches, and a GPO controller.

Based on v4.3-rc1 and needs b4fe8ba ("regmap: Add generic macro to define regmap_irq")
from Lee Jones' tree to build.

v1 can be found here: [1]

Changes from v1:
 - Split up DT Docs into separate patches
 - Use mfd core to instantiate sub-devices
 - Several small fixes as discussed in v1 thread

[1] http://www.spinics.net/lists/devicetree/msg98403.html

Andrew F. Davis (6):
  Documentation: tps65086: Add DT bindings for the TPS65086 PMIC
  Documentation: tps65086: Add DT bindings for the TPS65086 regulators
  Documentation: tps65086: Add DT bindings for the TPS65086 GPO
    controller
  mfd: tps65086: Add driver for the TPS65086 PMIC
  regulator: tps65086: Add regulator driver for the TPS65086 PMIC
  gpio: tps65086: Add GPIO driver for the TPS65086 PMIC

 .../devicetree/bindings/gpio/gpio-tps65086.txt     |  16 ++
 Documentation/devicetree/bindings/mfd/tps65086.txt |  46 ++++
 .../bindings/regulator/tps65086-regulator.txt      |  35 +++
 drivers/gpio/Kconfig                               |   6 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-tps65086.c                       | 115 +++++++++
 drivers/mfd/Kconfig                                |  14 ++
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/tps65086.c                             | 157 +++++++++++++
 drivers/regulator/Kconfig                          |   7 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/tps65086-regulator.c             | 260 +++++++++++++++++++++
 include/linux/mfd/tps65086.h                       | 120 ++++++++++
 13 files changed, 779 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
 create mode 100644 drivers/gpio/gpio-tps65086.c
 create mode 100644 drivers/mfd/tps65086.c
 create mode 100644 drivers/regulator/tps65086-regulator.c
 create mode 100644 include/linux/mfd/tps65086.h

-- 
1.9.1

[PATCH v2 1/6] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Andrew F. Davis]

The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 PMIC.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 Documentation/devicetree/bindings/mfd/tps65086.txt | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
new file mode 100644
index 0000000..2fd5394
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -0,0 +1,46 @@
+* TPS65086 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65086".
+ - reg			: I2C slave address.
+ - interrupt-parent	: Phandle to he parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, this
+			    should be 2. The first cell is the IRQ number,
+			    the second cell is the flags, encoded as the trigger
+			    masks from <dt-bindings/interrupt-controller/irq.h>.
+
+Additional nodes defined in:
+ - Regulators	: ../regulator/tps65086-regulator.txt
+ - GPIO		: ../gpio/gpio-tps65086.txt
+
+Example:
+
+	pmic: tps65086@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "ti,tps65086-regulator";
+
+			buck1 {
+				regulator-name = "vcc1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1600000>;
+				regulator-boot-on;
+				ti,regulator-decay;
+				ti,regulator-step-size-25mv;
+			};
+		};
+
+		gpio4: gpio {
+			compatible = "ti,tps65086-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
-- 
1.9.1

[PATCH v2 2/6] Documentation: tps65086: Add DT bindings for the TPS65086 regulators

[Andrew F. Davis]

The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 regulators.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 .../bindings/regulator/tps65086-regulator.txt      | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
new file mode 100644
index 0000000..de7d2d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
@@ -0,0 +1,35 @@
+* TPS65086 regulator bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65086-regulator".
+ - list of regulators provided by this controller, must be named after their
+     hardware counterparts: buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+
+Optional properties:
+ - Per-regulator optional properties are defined in regulator.txt.
+ - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
+				  if the regulator is factory set with a 25mv
+				  step voltage mapping.
+ - ti,regulator-decay		: This is applicable for buck[1-6], set this if
+				  the output needs to decay, default is for the
+				  output to slew down.
+
+Example:
+
+	regulators {
+		compatible = "ti,tps65086-regulator";
+
+		buck1 {
+			regulator-name = "vcc1";
+			regulator-min-microvolt = <1600000>;
+			regulator-max-microvolt = <1600000>;
+			regulator-boot-on;
+			ti,regulator-step-size-25mv;
+			ti,regulator-decay;
+		};
+
+		swa1 {
+			regulator-name = "ls1";
+			regulator-boot-on;
+		};
+	};
-- 
1.9.1

[PATCH v2 3/6] Documentation: tps65086: Add DT bindings for the TPS65086 GPO controller

[Andrew F. Davis]

The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 GPO controller.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
new file mode 100644
index 0000000..ba05107
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
@@ -0,0 +1,16 @@
+* TPS65086 GPO Controller bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65086-gpio".
+ - gpio-controller	: Marks the device node as a GPIO Controller.
+ - #gpio-cells		: Should be two. The first cell is the pin number
+			    and the second cell is used to specify flags.
+			    See ../gpio/gpio.txt for possible values.
+
+Example:
+
+	gpio4: gpio {
+		compatible = "ti,tps65086-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
-- 
1.9.1

[PATCH v2 4/6] mfd: tps65086: Add driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for the TPS65912 device. It provides communication
through I2C and contains the following components:

 - Regulators
 - Load switches
 - GPO controller

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/mfd/Kconfig          |  14 ++++
 drivers/mfd/Makefile         |   1 +
 drivers/mfd/tps65086.c       | 157 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tps65086.h | 120 +++++++++++++++++++++++++++++++++
 4 files changed, 292 insertions(+)
 create mode 100644 drivers/mfd/tps65086.c
 create mode 100644 include/linux/mfd/tps65086.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 99d6367..b46ee3b9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1093,6 +1093,20 @@ config TPS6507X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6507x.
 
+config MFD_TPS65086
+	tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
+	select REGMAP
+	select REGMAP_IRQ
+	select REGMAP_I2C
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	help
+	  If you say yes here you get support for the TPS65086 series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config TPS65911_COMPARATOR
 	tristate
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a59e3fc..7adb902 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
+obj-$(CONFIG_MFD_TPS65086)	+= tps65086.o
 obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
 obj-$(CONFIG_MFD_TPS65218)	+= tps65218.o
 obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
new file mode 100644
index 0000000..d6f8bb8
--- /dev/null
+++ b/drivers/mfd/tps65086.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+static const struct mfd_cell tps65086_cells[] = {
+	{
+		.name = "tps65086-regulator",
+		.of_compatible = "ti,tps65086-regulator",
+	},
+	{
+		.name = "tps65912-gpio",
+		.of_compatible = "ti,tps65086-gpio",
+	},
+};
+
+static const struct regmap_range tps65086_yes_ranges[] = {
+	regmap_reg_range(TPS65086_IRQ, TPS65086_IRQ),
+	regmap_reg_range(TPS65086_PMICSTAT, TPS65086_SHUTDNSRC),
+	regmap_reg_range(TPS65086_GPOCTRL, TPS65086_GPOCTRL),
+	regmap_reg_range(TPS65086_PG_STATUS1, TPS65086_OC_STATUS),
+};
+
+static const struct regmap_access_table tps65086_volatile_table = {
+	.yes_ranges = tps65086_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tps65086_yes_ranges),
+};
+
+static const struct regmap_config tps65086_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &tps65086_volatile_table,
+};
+
+static const struct regmap_irq tps65086_irqs[] = {
+	REGMAP_IRQ_REG(TPS65086_IRQ_DIETEMP, 0, TPS65086_IRQ_DIETEMP_MASK),
+	REGMAP_IRQ_REG(TPS65086_IRQ_SHUTDN, 0, TPS65086_IRQ_SHUTDN_MASK),
+	REGMAP_IRQ_REG(TPS65086_IRQ_FAULT, 0, TPS65086_IRQ_FAULT_MASK),
+};
+
+static struct regmap_irq_chip tps65086_irq_chip = {
+	.name = "tps65086",
+	.status_base = TPS65086_IRQ,
+	.mask_base = TPS65086_IRQ_MASK,
+	.ack_base = TPS65086_IRQ,
+	.init_ack_masked = true,
+	.num_regs = 1,
+	.irqs = tps65086_irqs,
+	.num_irqs = ARRAY_SIZE(tps65086_irqs),
+};
+
+static const struct of_device_id tps65086_of_match_table[] = {
+	{ .compatible = "ti,tps65086", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tps65086_of_match_table);
+
+static int tps65086_probe(struct i2c_client *client,
+			  const struct i2c_device_id *ids)
+{
+	struct tps65086 *tps;
+	unsigned int version;
+	int ret;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tps);
+	tps->dev = &client->dev;
+	tps->irq = client->irq;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps65086_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		dev_err(tps->dev, "Failed to initialize register map\n");
+		return PTR_ERR(tps->regmap);
+	}
+
+	ret = regmap_read(tps->regmap, TPS65086_DEVICEID, &version);
+	if (ret) {
+		dev_err(tps->dev, "Failed to read revision register\n");
+		return ret;
+	}
+
+	dev_info(tps->dev, "Device: TPS65086%01lX, OTP: %c, Rev: %ld\n",
+		 (version & TPS65086_DEVICEID_PART_MASK),
+		 (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A',
+		 (version & TPS65086_DEVICEID_REV_MASK) >> 6);
+
+	ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
+				  &tps65086_irq_chip, &tps->irq_data);
+	if (ret) {
+		dev_err(tps->dev, "Failed to register IRQ chip\n");
+		return ret;
+	}
+
+	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells,
+			      ARRAY_SIZE(tps65086_cells), NULL, 0,
+			      regmap_irq_get_domain(tps->irq_data));
+	if (ret) {
+		regmap_del_irq_chip(tps->irq, tps->irq_data);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_remove(struct i2c_client *client)
+{
+	struct tps65086 *tps = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+	return 0;
+}
+
+static const struct i2c_device_id tps65086_id_table[] = {
+	{ "tps65086", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, tps65086_id_table);
+
+static struct i2c_driver tps65086_driver = {
+	.driver		= {
+		.name	= "tps65086",
+		.of_match_table = tps65086_of_match_table,
+	},
+	.probe		= tps65086_probe,
+	.remove		= tps65086_remove,
+	.id_table       = tps65086_id_table,
+};
+module_i2c_driver(tps65086_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 PMIC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/tps65086.h b/include/linux/mfd/tps65086.h
new file mode 100644
index 0000000..2a9e9dd
--- /dev/null
+++ b/include/linux/mfd/tps65086.h
@@ -0,0 +1,120 @@
+/*
+ * TI TPS65086x
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#ifndef __LINUX_MFD_TPS65086_H
+#define __LINUX_MFD_TPS65086_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* List of registers for TPS65086 */
+#define TPS65086_DEVICEID		0x01
+#define TPS65086_IRQ			0x02
+#define TPS65086_IRQ_MASK		0x03
+#define TPS65086_PMICSTAT		0x04
+#define TPS65086_SHUTDNSRC		0x05
+#define TPS65086_BUCK1CTRL		0x20
+#define TPS65086_BUCK2CTRL		0x21
+#define TPS65086_BUCK3DECAY		0x22
+#define TPS65086_BUCK3VID		0x23
+#define TPS65086_BUCK3SLPCTRL		0x24
+#define TPS65086_BUCK4CTRL		0x25
+#define TPS65086_BUCK5CTRL		0x26
+#define TPS65086_BUCK6CTRL		0x27
+#define TPS65086_LDOA2CTRL		0x28
+#define TPS65086_LDOA3CTRL		0x29
+#define TPS65086_DISCHCTRL1		0x40
+#define TPS65086_DISCHCTRL2		0x41
+#define TPS65086_DISCHCTRL3		0x42
+#define TPS65086_PG_DELAY1		0x43
+#define TPS65086_FORCESHUTDN		0x91
+#define TPS65086_BUCK1SLPCTRL		0x92
+#define TPS65086_BUCK2SLPCTRL		0x93
+#define TPS65086_BUCK4VID		0x94
+#define TPS65086_BUCK4SLPVID		0x95
+#define TPS65086_BUCK5VID		0x96
+#define TPS65086_BUCK5SLPVID		0x97
+#define TPS65086_BUCK6VID		0x98
+#define TPS65086_BUCK6SLPVID		0x99
+#define TPS65086_LDOA2VID		0x9A
+#define TPS65086_LDOA3VID		0x9B
+#define TPS65086_BUCK123CTRL		0x9C
+#define TPS65086_PG_DELAY2		0x9D
+#define TPS65086_PIN_EN_MASK1		0x9E
+#define TPS65086_PIN_EN_MASK2		0x9F
+#define TPS65086_SWVTT_EN		0x9F
+#define TPS65086_PIN_EN_OVR1		0xA0
+#define TPS65086_PIN_EN_OVR2		0xA1
+#define TPS65086_GPOCTRL		0xA1
+#define TPS65086_PWR_FAULT_MASK1	0xA2
+#define TPS65086_PWR_FAULT_MASK2	0xA3
+#define TPS65086_GPO1PG_CTRL1		0xA4
+#define TPS65086_GPO1PG_CTRL2		0xA5
+#define TPS65086_GPO4PG_CTRL1		0xA6
+#define TPS65086_GPO4PG_CTRL2		0xA7
+#define TPS65086_GPO2PG_CTRL1		0xA8
+#define TPS65086_GPO2PG_CTRL2		0xA9
+#define TPS65086_GPO3PG_CTRL1		0xAA
+#define TPS65086_GPO3PG_CTRL2		0xAB
+#define TPS65086_LDOA1CTRL		0xAE
+#define TPS65086_PG_STATUS1		0xB0
+#define TPS65086_PG_STATUS2		0xB1
+#define TPS65086_PWR_FAULT_STATUS1	0xB2
+#define TPS65086_PWR_FAULT_STATUS2	0xB3
+#define TPS65086_TEMPCRIT		0xB4
+#define TPS65086_TEMPHOT		0xB5
+#define TPS65086_OC_STATUS		0xB6
+
+/* IRQ Register field definitions */
+#define TPS65086_IRQ_DIETEMP_MASK	BIT(0)
+#define TPS65086_IRQ_SHUTDN_MASK	BIT(3)
+#define TPS65086_IRQ_FAULT_MASK		BIT(7)
+
+/* DEVICEID Register field definitions */
+#define TPS65086_DEVICEID_PART_MASK	GENMASK(3, 0)
+#define TPS65086_DEVICEID_OTP_MASK	GENMASK(5, 4)
+#define TPS65086_DEVICEID_REV_MASK	GENMASK(7, 6)
+
+/* VID Masks */
+#define BUCK_VID_MASK			GENMASK(7, 1)
+#define VDOA1_VID_MASK			GENMASK(4, 1)
+#define VDOA23_VID_MASK			GENMASK(3, 0)
+
+/* Define the TPS65086 IRQ numbers */
+enum tps65086_irqs {
+	TPS65086_IRQ_DIETEMP,
+	TPS65086_IRQ_SHUTDN,
+	TPS65086_IRQ_FAULT,
+};
+
+/*
+ * struct tps65086 - state holder for the tps65086 driver
+ *
+ * Device data may be used to access the TPS65086 chip
+ */
+struct tps65086 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	/* IRQ Data */
+	int irq;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /*  __LINUX_MFD_TPS65086_H */
-- 
1.9.1

[PATCH v2 5/6] regulator: tps65086: Add regulator driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for TPS65086 PMIC regulators.

The regulators set consists of 3 Step-down Controllers, 3 Step-down
Converters, 3 LDOs, 3 Load Switches, and a Sink and Source LDO. The
output voltages are configurable and are meant to supply power to a
SoC and/or other components.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/regulator/Kconfig              |   7 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/tps65086-regulator.c | 260 +++++++++++++++++++++++++++++++++
 3 files changed, 268 insertions(+)
 create mode 100644 drivers/regulator/tps65086-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 64bccff..24237cf 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -680,6 +680,13 @@ config REGULATOR_TPS6507X
 	  three step-down converters and two general-purpose LDO voltage regulators.
 	  It supports TI's software based Class-2 SmartReflex implementation.
 
+config REGULATOR_TPS65086
+	tristate "TI TPS65086 Power regulators"
+	depends on MFD_TPS65086
+	help
+	  This driver provides support for the voltage regulators on
+	  TI TPS65086 PMICs.
+
 config REGULATOR_TPS65090
 	tristate "TI TPS65090 Power regulator"
 	depends on MFD_TPS65090
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0f81749..945d8ec 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65086) += tps65086-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65090) += tps65090-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65218) += tps65218-regulator.o
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
new file mode 100644
index 0000000..f6d34c1
--- /dev/null
+++ b/drivers/regulator/tps65086-regulator.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/tps65086.h>
+
+enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1,
+	LDOA2, LDOA3, SWA1, SWB1, SWB2, VTT };
+
+#define TPS65086_REGULATOR(_name, _id, _nv, _vr, _vm, _er, _em, _lr, _dr, _dm)\
+	[_id] = {							\
+		.desc = {						\
+			.name			= _name,		\
+			.id			= _id,			\
+			.ops			= &reg_ops,		\
+			.n_voltages		= _nv,			\
+			.type			= REGULATOR_VOLTAGE,	\
+			.owner			= THIS_MODULE,		\
+			.vsel_reg		= _vr,			\
+			.vsel_mask		= _vm,			\
+			.enable_reg		= _er,			\
+			.enable_mask		= _em,			\
+			.volt_table		= NULL,			\
+			.linear_ranges		= _lr,			\
+			.n_linear_ranges	= ARRAY_SIZE(_lr),	\
+		},							\
+		.decay_reg = _dr,					\
+		.decay_mask = _dm,					\
+	}
+
+#define TPS65086_SWITCH(_name, _id, _er, _em)				\
+	[_id] = {							\
+		.desc = {						\
+			.name			= _name,		\
+			.id			= _id,			\
+			.ops			= &switch_ops,		\
+			.type			= REGULATOR_VOLTAGE,	\
+			.owner			= THIS_MODULE,		\
+			.enable_reg		= _er,			\
+			.enable_mask		= _em,			\
+		},							\
+	}
+
+struct tps65086_regulator {
+	struct regulator_desc desc;
+	unsigned int decay_reg;
+	unsigned int decay_mask;
+};
+
+static const struct regulator_linear_range tps65086_buck126_10mv_ranges[] = {
+	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
+	REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000),
+};
+
+static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = {
+	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
+	REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0),
+	REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000),
+};
+
+static const struct regulator_linear_range tps65086_buck345_ranges[] = {
+	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
+	REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000),
+};
+
+static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
+	REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
+	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xA, 100000),
+	REGULATOR_LINEAR_RANGE(2700000, 0xB, 0xD, 150000),
+	REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
+};
+
+static const struct regulator_linear_range tps65086_ldoa23_ranges[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000),
+	REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000),
+};
+
+/* Operations permitted on regulators */
+static struct regulator_ops reg_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+};
+
+/* Operations permitted on load switches */
+static struct regulator_ops switch_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static struct tps65086_regulator regulators[] = {
+	TPS65086_REGULATOR("BUCK1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
+			   BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(0),
+			   tps65086_buck126_10mv_ranges, TPS65086_BUCK1CTRL,
+			   BIT(0)),
+	TPS65086_REGULATOR("BUCK2", BUCK2, 0x80, TPS65086_BUCK2CTRL,
+			   BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(1),
+			   tps65086_buck126_10mv_ranges, TPS65086_BUCK2CTRL,
+			   BIT(0)),
+	TPS65086_REGULATOR("BUCK3", BUCK3, 0x80, TPS65086_BUCK3VID,
+			   BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(2),
+			   tps65086_buck345_ranges, TPS65086_BUCK3DECAY,
+			   BIT(0)),
+	TPS65086_REGULATOR("BUCK4", BUCK4, 0x80, TPS65086_BUCK4VID,
+			   BUCK_VID_MASK, TPS65086_BUCK4CTRL, BIT(0),
+			   tps65086_buck345_ranges, TPS65086_BUCK4VID,
+			   BIT(0)),
+	TPS65086_REGULATOR("BUCK5", BUCK5, 0x80, TPS65086_BUCK5VID,
+			   BUCK_VID_MASK, TPS65086_BUCK5CTRL, BIT(0),
+			   tps65086_buck345_ranges, TPS65086_BUCK5CTRL,
+			   BIT(0)),
+	TPS65086_REGULATOR("BUCK6", BUCK6, 0x80, TPS65086_BUCK6VID,
+			   BUCK_VID_MASK, TPS65086_BUCK6CTRL, BIT(0),
+			   tps65086_buck126_10mv_ranges, TPS65086_BUCK6CTRL,
+			   BIT(0)),
+	TPS65086_REGULATOR("LDOA1", LDOA1, 0xF, TPS65086_LDOA1CTRL,
+			   VDOA1_VID_MASK, TPS65086_LDOA1CTRL, BIT(0),
+			   tps65086_ldoa1_ranges, 0, 0),
+	TPS65086_REGULATOR("LDOA2", LDOA2, 0x10, TPS65086_LDOA2VID,
+			   VDOA23_VID_MASK, TPS65086_LDOA2CTRL, BIT(0),
+			   tps65086_ldoa23_ranges, 0, 0),
+	TPS65086_REGULATOR("LDOA3", LDOA3, 0x10, TPS65086_LDOA3VID,
+			   VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
+			   tps65086_ldoa23_ranges, 0, 0),
+	TPS65086_SWITCH("SWA1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
+	TPS65086_SWITCH("SWB1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+	TPS65086_SWITCH("SWB2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+	TPS65086_SWITCH("VTT", VTT, TPS65086_SWVTT_EN, BIT(4)),
+};
+
+static struct of_regulator_match tps65086_matches[] = {
+	{ .name = "buck1", .driver_data = &regulators[BUCK1], },
+	{ .name = "buck2", .driver_data = &regulators[BUCK2], },
+	{ .name = "buck3", .driver_data = &regulators[BUCK3], },
+	{ .name = "buck4", .driver_data = &regulators[BUCK4], },
+	{ .name = "buck5", .driver_data = &regulators[BUCK5], },
+	{ .name = "buck6", .driver_data = &regulators[BUCK6], },
+	{ .name = "ldoa1", .driver_data = &regulators[LDOA1], },
+	{ .name = "ldoa2", .driver_data = &regulators[LDOA2], },
+	{ .name = "ldoa3", .driver_data = &regulators[LDOA3], },
+	{ .name = "swa1", .driver_data = &regulators[SWA1], },
+	{ .name = "swb1", .driver_data = &regulators[SWB1], },
+	{ .name = "swb2", .driver_data = &regulators[SWB2], },
+	{ .name = "vtt", .driver_data = &regulators[VTT], },
+};
+
+static inline bool has_25mv_mode(int id)
+{
+	switch (id) {
+	case BUCK1:
+	case BUCK2:
+	case BUCK6:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int tps65086_regulator_probe(struct platform_device *pdev)
+{
+	struct tps65086 *tps = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct tps65086_regulator *regulator;
+
+	int i, ret;
+
+	platform_set_drvdata(pdev, tps);
+
+	config.dev = &pdev->dev;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
+
+	ret = of_regulator_match(&pdev->dev, pdev->dev.of_node,
+				 tps65086_matches,
+				 ARRAY_SIZE(tps65086_matches));
+	if (ret < 0) {
+		dev_err(tps->dev, "Error parsing regulator init data\n");
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tps65086_matches); i++) {
+		config.init_data = tps65086_matches[i].init_data;
+		config.of_node = tps65086_matches[i].of_node;
+		regulator = tps65086_matches[i].driver_data;
+
+		/* Check for 25mV step mode */
+		if (has_25mv_mode(regulator->desc.id) &&
+				of_property_read_bool(config.of_node, "ti,regulator-step-size-25mv")) {
+			regulator->desc.linear_ranges = tps65086_buck126_25mv_ranges;
+			regulator->desc.n_linear_ranges = ARRAY_SIZE(tps65086_buck126_25mv_ranges);
+		}
+
+		/* Check for decay mode */
+		if (i <= BUCK6 && of_property_read_bool(config.of_node, "ti,regulator-decay")) {
+			ret = regmap_write_bits(tps->regmap,
+						regulator->decay_reg,
+						regulator->decay_mask,
+						regulator->decay_mask);
+			if (ret < 0) {
+				dev_err(tps->dev, "Error setting decay\n");
+				return ret;
+			}
+		}
+
+		rdev = devm_regulator_register(&pdev->dev, &regulator->desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(tps->dev, "failed to register %s regulator\n",
+				pdev->name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_regulator_id_table[] = {
+	{ "tps65912-regulator", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_regulator_id_table);
+
+static struct platform_driver tps65086_regulator_driver = {
+	.driver = {
+		.name = "tps65086-regulator",
+	},
+	.probe = tps65086_regulator_probe,
+	.id_table = tps65086_regulator_id_table,
+};
+module_platform_driver(tps65086_regulator_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 Regulator driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

[PATCH v2 6/6] gpio: tps65086: Add GPIO driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for the TPS65086 PMIC GPOs.

TPS65086 has four configurable GPOs that can be used for several
purposes.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/gpio/Kconfig         |   6 +++
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-tps65086.c | 115 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 122 insertions(+)
 create mode 100644 drivers/gpio/gpio-tps65086.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b4fc9e4..ccb7e0d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -824,6 +824,12 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on TI TPS65086x PMICs.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f79a7c4..2611c7e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
 obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
+obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
new file mode 100644
index 0000000..ef7a418
--- /dev/null
+++ b/drivers/gpio/gpio-tps65086.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+struct tps65086_gpio {
+	struct gpio_chip gpio_chip;
+	struct tps65086 *tps;
+};
+
+static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct tps65086_gpio, gpio_chip);
+}
+
+static int tps65086_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(gc);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(4 + offset);
+}
+
+static void tps65086_gpio_set(struct gpio_chip *gc, unsigned offset,
+			      int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(gc);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tps65086-gpio",
+	.owner			= THIS_MODULE,
+	.get			= tps65086_gpio_get,
+	.set			= tps65086_gpio_set,
+	.can_sleep		= true,
+	.ngpio			= 4,
+	.base			= -1,
+};
+
+static int tps65086_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->gpio_chip = template_chip;
+	ret = gpiochip_add(&gpio->gpio_chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static int tps65086_gpio_remove(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gpio->gpio_chip);
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_gpio_id_table[] = {
+	{ "tps65912-regulator", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
+
+static struct platform_driver tps65086_gpio_driver = {
+	.driver = {
+		.name = "tps65086-gpio",
+	},
+	.probe = tps65086_gpio_probe,
+	.remove = tps65086_gpio_remove,
+	.id_table = tps65086_gpio_id_table,
+};
+module_platform_driver(tps65086_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 GPIO driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

Re: [PATCH v2 5/6] regulator: tps65086: Add regulator driver for the TPS65086 PMIC

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 599 bytes --]

On Fri, Oct 30, 2015 at 05:41:43PM -0500, Andrew F. Davis wrote:

> +struct tps65086_regulator {
> +	struct regulator_desc desc;
> +	unsigned int decay_reg;
> +	unsigned int decay_mask;

The decay_reg and decay_mask fields appear to be entirely write only,
why are they present?

> +	ret = of_regulator_match(&pdev->dev, pdev->dev.of_node,
> +				 tps65086_matches,
> +				 ARRAY_SIZE(tps65086_matches));
> +	if (ret < 0) {
> +		dev_err(tps->dev, "Error parsing regulator init data\n");
> +		return ret;
> +	}

Please match regulators using the fields in the regulator_desc rather
than open coding.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v2 5/6] regulator: tps65086: Add regulator driver for the TPS65086 PMIC

[Andrew F. Davis]

On 10/31/2015 09:37 PM, Mark Brown wrote:
> On Fri, Oct 30, 2015 at 05:41:43PM -0500, Andrew F. Davis wrote:
>
>> +struct tps65086_regulator {
>> +	struct regulator_desc desc;
>> +	unsigned int decay_reg;
>> +	unsigned int decay_mask;
>
> The decay_reg and decay_mask fields appear to be entirely write only,
> why are they present?
>

Not sure what you mean, they are written to differently for each regulator,
and read when setting the decay mode in _probe.

>> +	ret = of_regulator_match(&pdev->dev, pdev->dev.of_node,
>> +				 tps65086_matches,
>> +				 ARRAY_SIZE(tps65086_matches));
>> +	if (ret < 0) {
>> +		dev_err(tps->dev, "Error parsing regulator init data\n");
>> +		return ret;
>> +	}
>
> Please match regulators using the fields in the regulator_desc rather
> than open coding.
>

I need to match to get the driver specific information for each regulator,
if I let regulator_register do it I never get a chance to process the match,
unless there is a callback or something I'm missing.

Re: [PATCH v2 5/6] regulator: tps65086: Add regulator driver for the TPS65086 PMIC

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1171 bytes --]

On Tue, Nov 03, 2015 at 09:57:46AM -0600, Andrew F. Davis wrote:
> On 10/31/2015 09:37 PM, Mark Brown wrote:
> >On Fri, Oct 30, 2015 at 05:41:43PM -0500, Andrew F. Davis wrote:

> >>+	struct regulator_desc desc;
> >>+	unsigned int decay_reg;
> >>+	unsigned int decay_mask;

> >The decay_reg and decay_mask fields appear to be entirely write only,
> >why are they present?

> Not sure what you mean, they are written to differently for each regulator,
> and read when setting the decay mode in _probe.

Ugh, that's a bit hidden (mostly due to not using the callback).

> >>+	ret = of_regulator_match(&pdev->dev, pdev->dev.of_node,
> >>+				 tps65086_matches,
> >>+				 ARRAY_SIZE(tps65086_matches));
> >>+	if (ret < 0) {
> >>+		dev_err(tps->dev, "Error parsing regulator init data\n");
> >>+		return ret;
> >>+	}

> >Please match regulators using the fields in the regulator_desc rather
> >than open coding.

> I need to match to get the driver specific information for each regulator,
> if I let regulator_register do it I never get a chance to process the match,
> unless there is a callback or something I'm missing.

There's a callback you are missing, of_parse_cb().

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v2 5/6] regulator: tps65086: Add regulator driver for the TPS65086 PMIC

[Andrew F. Davis]

On 11/03/2015 10:31 AM, Mark Brown wrote:
> On Tue, Nov 03, 2015 at 09:57:46AM -0600, Andrew F. Davis wrote:
>> On 10/31/2015 09:37 PM, Mark Brown wrote:
>>> On Fri, Oct 30, 2015 at 05:41:43PM -0500, Andrew F. Davis wrote:
>
>>>> +	struct regulator_desc desc;
>>>> +	unsigned int decay_reg;
>>>> +	unsigned int decay_mask;
>
>>> The decay_reg and decay_mask fields appear to be entirely write only,
>>> why are they present?
>
>> Not sure what you mean, they are written to differently for each regulator,
>> and read when setting the decay mode in _probe.
>
> Ugh, that's a bit hidden (mostly due to not using the callback).
>
>>>> +	ret = of_regulator_match(&pdev->dev, pdev->dev.of_node,
>>>> +				 tps65086_matches,
>>>> +				 ARRAY_SIZE(tps65086_matches));
>>>> +	if (ret < 0) {
>>>> +		dev_err(tps->dev, "Error parsing regulator init data\n");
>>>> +		return ret;
>>>> +	}
>
>>> Please match regulators using the fields in the regulator_desc rather
>>> than open coding.
>
>> I need to match to get the driver specific information for each regulator,
>> if I let regulator_register do it I never get a chance to process the match,
>> unless there is a callback or something I'm missing.
>
> There's a callback you are missing, of_parse_cb().
>

Ah, that will make things easier, I'll re-spin with the callback.