From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965155AbbKCUbt (ORCPT ); Tue, 3 Nov 2015 15:31:49 -0500 Received: from mail-pa0-f48.google.com ([209.85.220.48]:36038 "EHLO mail-pa0-f48.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964854AbbKCUbd (ORCPT ); Tue, 3 Nov 2015 15:31:33 -0500 From: Douglas Anderson To: John Youn , balbi@ti.com Cc: Yunzhi Li , =?UTF-8?q?Heiko=20St=C3=BCbner?= , linux-rockchip@lists.infradead.org, Julius Werner , gregory.herrero@intel.com, yousaf.kaukab@intel.com, dinguyen@opensource.altera.com, Douglas Anderson , johnyoun@synopsys.com, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them Date: Tue, 3 Nov 2015 12:30:29 -0800 Message-Id: <1446582629-30091-2-git-send-email-dianders@chromium.org> X-Mailer: git-send-email 2.6.0.rc2.230.g3dd15c0 In-Reply-To: <1446582629-30091-1-git-send-email-dianders@chromium.org> References: <1446582629-30091-1-git-send-email-dianders@chromium.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In general it is wise to clear interrupts before processing them. If you don't do that, you can get: 1. Interrupt happens 2. You look at system state and process interrupt 3. A new interrupt happens 4. You clear interrupt without processing it. This patch was actually a first attempt to fix missing device insertions as described in (usb: dwc2: host: Fix missing device insertions) and it did solve some of the signal bouncing problems but not all of them (which is why I submitted the other patch). Specifically, this patch itself would sometimes change: 1. hardware sees connect 2. hardware sees disconnect 3. hardware sees connect 4. dwc2_port_intr() - clears connect interrupt 5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect() ...to: 1. hardware sees connect 2. hardware sees disconnect 3. dwc2_port_intr() - clears connect interrupt 4. hardware sees connect 5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect() ...but with different timing then sometimes we'd still miss cable insertions. In any case, though this patch doesn't fix any (known) problems, it still seems wise as a general policy to clear interrupt before handling them. Signed-off-by: Douglas Anderson --- Changes in v2: None drivers/usb/dwc2/core_intr.c | 55 ++++++++++++++++++++++---------------------- drivers/usb/dwc2/hcd_intr.c | 16 ++++++------- 2 files changed, 35 insertions(+), 36 deletions(-) diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 61601d16e233..2a166b7eec41 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -80,15 +80,16 @@ static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) { - u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0); + u32 hprt0; + /* Clear interrupt */ + dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); + + hprt0 = dwc2_readl(hsotg->regs + HPRT0); if (hprt0 & HPRT0_ENACHG) { hprt0 &= ~HPRT0_ENA; dwc2_writel(hprt0, hsotg->regs + HPRT0); } - - /* Clear interrupt */ - dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); } /** @@ -98,11 +99,11 @@ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) { - dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", - dwc2_is_host_mode(hsotg) ? "Host" : "Device"); - /* Clear interrupt */ dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); + + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); } /** @@ -276,9 +277,13 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) { - u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + u32 gintmsk; + + /* Clear interrupt */ + dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); /* Need to disable SOF interrupt immediately */ + gintmsk = dwc2_readl(hsotg->regs + GINTMSK); gintmsk &= ~GINTSTS_SOF; dwc2_writel(gintmsk, hsotg->regs + GINTMSK); @@ -295,9 +300,6 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) queue_work(hsotg->wq_otg, &hsotg->wf_otg); spin_lock(&hsotg->lock); } - - /* Clear interrupt */ - dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); } /** @@ -315,12 +317,12 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) { int ret; - dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", - hsotg->lx_state); - /* Clear interrupt */ dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", + hsotg->lx_state); + if (dwc2_is_device_mode(hsotg)) { if (hsotg->lx_state == DWC2_L2) { ret = dwc2_exit_hibernation(hsotg, true); @@ -347,6 +349,10 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) { int ret; + + /* Clear interrupt */ + dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); @@ -368,10 +374,9 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) /* Change to L0 state */ hsotg->lx_state = DWC2_L0; } else { - if (hsotg->core_params->hibernation) { - dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); + if (hsotg->core_params->hibernation) return; - } + if (hsotg->lx_state != DWC2_L1) { u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); @@ -385,9 +390,6 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) hsotg->lx_state = DWC2_L0; } } - - /* Clear interrupt */ - dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); } /* @@ -396,14 +398,14 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) { + dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device", dwc2_op_state_str(hsotg)); if (hsotg->op_state == OTG_STATE_A_HOST) dwc2_hcd_disconnect(hsotg, false); - - dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); } /* @@ -419,6 +421,9 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) u32 dsts; int ret; + /* Clear interrupt */ + dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "USB SUSPEND\n"); if (dwc2_is_device_mode(hsotg)) { @@ -437,7 +442,7 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) if (!dwc2_is_device_connected(hsotg)) { dev_dbg(hsotg->dev, "ignore suspend request before enumeration\n"); - goto clear_int; + return; } ret = dwc2_enter_hibernation(hsotg); @@ -476,10 +481,6 @@ skip_power_saving: hsotg->op_state = OTG_STATE_A_HOST; } } - -clear_int: - /* Clear interrupt */ - dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); } #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 03504ac2fecc..4c7f709b8182 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -122,6 +122,9 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg) struct dwc2_qh *qh; enum dwc2_transaction_type tr_type; + /* Clear interrupt */ + dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS); + #ifdef DEBUG_SOF dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n"); #endif @@ -146,9 +149,6 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg) tr_type = dwc2_hcd_select_transactions(hsotg); if (tr_type != DWC2_TRANSACTION_NONE) dwc2_hcd_queue_transactions(hsotg, tr_type); - - /* Clear interrupt */ - dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS); } /* @@ -347,11 +347,12 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) * Set flag and clear if detected */ if (hprt0 & HPRT0_CONNDET) { + writel(hprt0_modify | HPRT0_CONNDET, hsotg->regs + HPRT0); + dev_vdbg(hsotg->dev, "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n", hprt0); dwc2_hcd_connect(hsotg); - hprt0_modify |= HPRT0_CONNDET; /* * The Hub driver asserts a reset when it sees port connect @@ -364,10 +365,10 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) * Clear if detected - Set internal flag if disabled */ if (hprt0 & HPRT0_ENACHG) { + writel(hprt0_modify | HPRT0_ENACHG, hsotg->regs + HPRT0); dev_vdbg(hsotg->dev, " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n", hprt0, !!(hprt0 & HPRT0_ENA)); - hprt0_modify |= HPRT0_ENACHG; if (hprt0 & HPRT0_ENA) dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify); else @@ -376,15 +377,12 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) /* Overcurrent Change Interrupt */ if (hprt0 & HPRT0_OVRCURRCHG) { + writel(hprt0_modify | HPRT0_OVRCURRCHG, hsotg->regs + HPRT0); dev_vdbg(hsotg->dev, " --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n", hprt0); hsotg->flags.b.port_over_current_change = 1; - hprt0_modify |= HPRT0_OVRCURRCHG; } - - /* Clear Port Interrupts */ - dwc2_writel(hprt0_modify, hsotg->regs + HPRT0); } /* -- 2.6.0.rc2.230.g3dd15c0