From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030825AbbKEFvf (ORCPT ); Thu, 5 Nov 2015 00:51:35 -0500 Received: from mail-gw2-out.broadcom.com ([216.31.210.63]:31445 "EHLO mail-gw2-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756562AbbKEFvb (ORCPT ); Thu, 5 Nov 2015 00:51:31 -0500 X-IronPort-AV: E=Sophos;i="5.20,246,1444719600"; d="scan'208";a="79747656" From: Kapil Hali To: Rob Herring , Pawel Moll , "Mark Rutland" , Ian Campbell , Kumar Gala , "Russell King" , Ray Jui , Scott Branden , Jon Mason , Florian Fainelli CC: Gregory Fong , Lee Jones , "Hauke Mehrtens" , Heiko Stuebner , Kever Yang , Maxime Ripard , Olof Johansson , "Paul Walmsley" , Linus Walleij , Chen-Yu Tsai , , , , , Kapil Hali Subject: [PATCH RESEND 1/4] dt-bindings: add SMP enable-method for Broadcom NSP Date: Thu, 5 Nov 2015 00:51:18 -0500 Message-ID: <1446702681-45339-2-git-send-email-kapilh@broadcom.com> X-Mailer: git-send-email 2.1.0 In-Reply-To: <1446702681-45339-1-git-send-email-kapilh@broadcom.com> References: <1446702681-45339-1-git-send-email-kapilh@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's Northstar Plus CPU to the 32-bit ARM CPU device tree binding documentation file and create a new binding documentation for Northstar Plus CPU pen-release mechanism. Signed-off-by: Kapil Hali --- .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 36 ++++++++++++++++++++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + 2 files changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt new file mode 100644 index 0000000..8506da7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt @@ -0,0 +1,36 @@ +Broadcom Northstar Plus SoC CPU Enable Method +--------------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + +The enable method is specified by defining the following required +properties in the "cpus" device tree node: + - enable-method = "brcm,bcm-nsp-smp"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm-nsp-smp"; + secondary-boot-reg = <0xffff042c>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 91e6e5c..6abe3f3 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -191,6 +191,7 @@ nodes to be present and contain the properties described below. "allwinner,sun8i-a23" "arm,psci" "brcm,brahma-b15" + "brcm,bcm-nsp-smp" "marvell,armada-375-smp" "marvell,armada-380-smp" "marvell,armada-390-smp" -- 2.1.0