From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.7 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 19F38C433DF for ; Tue, 9 Jun 2020 23:02:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DE5792072F for ; Tue, 9 Jun 2020 23:02:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728945AbgFIXCl (ORCPT ); Tue, 9 Jun 2020 19:02:41 -0400 Received: from ms-10.1blu.de ([178.254.4.101]:33190 "EHLO ms-10.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728108AbgFIXCi (ORCPT ); Tue, 9 Jun 2020 19:02:38 -0400 X-Greylist: delayed 2151 seconds by postgrey-1.27 at vger.kernel.org; Tue, 09 Jun 2020 19:02:36 EDT Received: from [78.43.71.214] (helo=marius.localnet) by ms-10.1blu.de with esmtpsa (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.86_2) (envelope-from ) id 1jimhd-0006eZ-KY; Wed, 10 Jun 2020 00:26:42 +0200 From: Marius Zachmann Cc: jdelvare@suse.com, linux-hwmon@vger.kernel.org, mail@mariuszachmann.de, linux@roeck-us.net, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org Subject: [RFC] drivers/hwmon: Corsair Commander Pro driver Date: Wed, 10 Jun 2020 00:26:40 +0200 Message-ID: <144706443.v20KqW5jKc@marius> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-Con-Id: 241080 X-Con-U: 0-mail X-Originating-IP: 78.43.71.214 To: unlisted-recipients:; (no To-header on input) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This is a driver for the Corsair Commander Pro. Since this is my first addition to the kernel I would be happy, if you would take a look at it. I am using this driver on my computer at home and I had a few people test it. The device: The Corsair Commander Pro is a USB device, which is usually connected on the internal USB headers on the mainboard. It has 6 fan connectors, 4 thermal sensor connectors and 2 RGB connectors. It also reads the voltages on the SATA connector, which it needs for power. The driver: I hope hwmon is the right place. The driver is a HID driver, but it uses usb_bulk_msg for communication. The device registers as a HID device and there are userspace tools, which use hidraw to access it. I think, it would be good to maintain compatibility with these tools, but the driver can easily be rewritten to be a pure USB driver. For now it can read temp sensors, fan speeds, voltage values and set pwm values. It also reads the connection status on the fan headers. There are a few more things, which I would like to add in the near future: * Fan curves (not yet sure about the nicest way to provide sysfs access) * Force 3pin or 4pin mode. (Sometimes the device doesn't detect the fans correctly) * Setting fixed RPM I do not work for Corsair and I intend to keep the driver maintainted as long as I use the device privately. Signed-off-by: Marius Zachmann --- Documentation/hwmon/corsair-cpro.rst | 42 +++ MAINTAINERS | 6 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair-cpro.c | 481 +++++++++++++++++++++++++++ 5 files changed, 540 insertions(+) create mode 100644 Documentation/hwmon/corsair-cpro.rst create mode 100644 drivers/hwmon/corsair-cpro.c diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst new file mode 100644 index 000000000000..d4ea1b6b9336 --- /dev/null +++ b/Documentation/hwmon/corsair-cpro.rst @@ -0,0 +1,42 @@ +Kernel driver corsair-cpro +========================== + +Supported devices: + + * Corsair Commander Pro + * Corsair Commander Pro (1000D) + +Author: Marius Zachmann + +Description +----------- + +This driver implements the sysfs interface for the Corsair Commander Pro. +The Corsair Commander Pro is a USB device with 6 fan connectors, +4 temperature sensor connectors and 2 Corsair LED connectors. +It can read the voltage levels on the SATA power connector. + +Usage Notes +----------- + +Since it is a USB device, hotswapping is possible. The device is autodetected. + +Sysfs entries +------------- + +in0_input Voltage on SATA 12v +in1_input Voltage on SATA 5v +in2_input Voltage on SATA 3.3v + +temp[0-3]_input Connected temperature sensors + +fan[0-5]_input Connected fan rpm. +fan[0-5]_label Shows connection status of the fan as detected by the + device. + "fanX nc" no connection + "fanX 3pin" 3-pin fan detected + "fanX 4pin" 4-pin fan detected +fan[0-5]_enable the driver only reports fan speeds when 1 +pwm[0-5] Sets the fan speed. Values from 0-255. + When reading, it reports the last value, which + was set by the driver. diff --git a/MAINTAINERS b/MAINTAINERS index f08f290df174..169530c7eede 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4386,6 +4386,12 @@ S: Maintained F: Documentation/hwmon/coretemp.rst F: drivers/hwmon/coretemp.c +CORSAIR-CPRO HARDWARE MONITOR DRIVER +M: Marius Zachmann +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/corsair-cpro.c + COSA/SRP SYNC SERIAL DRIVER M: Jan "Yenya" Kasprzak S: Maintained diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 288ae9f63588..9f5a808768ca 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on USB_HID + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3e32c21f5efe..18e1ef74ade7 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o +obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c new file mode 100644 index 000000000000..8ba7fb061184 --- /dev/null +++ b/drivers/hwmon/corsair-cpro.c @@ -0,0 +1,481 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * corsair-cpro.c - Linux driver for Corsair Commander Pro + * Copyright (C) 2020 Marius Zachmann + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define hid_to_usb_dev(hid_dev) \ + to_usb_device(hid_dev->dev.parent->parent) + +#define USB_VENDOR_ID_CORSAIR 0x1b1c +#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10 +#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00 + +#define OUT_BUFFER_SIZE 63 +#define IN_BUFFER_SIZE 16 +#define LABEL_LENGTH 10 + +#define CTL_GET_TMP 0x11 /* byte 1 is channel, rest zero */ + /* returns temp for channel in bytes 1 and 2 */ +#define CTL_GET_VOLT 0x12 /* byte 1 = rail number 12, 5, 3.3 */ + /* returns volt in bytes 1,2 */ +#define CTL_GET_FAN_CNCT 0x20 /* returns in bytes 1-6 */ + /* 0 for no connect */ + /* 1 for 3pin, 2 for 4pin */ +#define CTL_GET_FAN_RPM 0x21 /* works like CTL_GET_TMP */ +#define CTL_SET_FAN_FPWM 0x23 /* byte 1 is fan number */ + /* byte 2 is percentage from 0 - 100 */ + +struct ccp_device { + struct hid_device *hdev; + struct device *hwmondev; + struct mutex mutex; + int pwm[6]; + int fan_enable[6]; + char fan_label[6][LABEL_LENGTH]; + +}; + +/* send 63 byte buffer and receive response in same buffer */ +static int send_usb_cmd(struct ccp_device *ccp, u8 *buffer) +{ + int ret; + struct usb_device *udev = hid_to_usb_dev(ccp->hdev); + int actual_length; + + + mutex_lock(&ccp->mutex); + + ret = usb_bulk_msg(udev, + usb_sndintpipe(udev, 2), + buffer, + OUT_BUFFER_SIZE, + &actual_length, + 1000); + if (ret < 0) { + hid_err(ccp->hdev, + "usb_bulk_msg send failed: %d", ret); + goto exit; + } + + ret = usb_bulk_msg(udev, + usb_rcvintpipe(udev, 1), + buffer, + IN_BUFFER_SIZE, + &actual_length, + 1000); + if (ret) { + hid_err(ccp->hdev, + "usb_bulk_msg receive failed: %d", ret); + goto exit; + } + +exit: + mutex_unlock(&ccp->mutex); + return ret; +} + +/* for commands, which return just a number depending on a channel: */ +/* get_temp, get_volt, get_fan_rpm */ +static int get_data(struct ccp_device *ccp, int command, int channel, long *val) +{ + int ret = 0; + u8 *buffer; + + buffer = kzalloc(OUT_BUFFER_SIZE, GFP_KERNEL); + if (buffer == 0) + return -ENOMEM; + + buffer[0] = command; + buffer[1] = channel; + ret = send_usb_cmd(ccp, buffer); + if (ret) + return -EIO; + + *val = (buffer[1] << 8) + buffer[2]; + + kfree(buffer); + return ret; +} + +static int set_pwm(struct ccp_device *ccp, int channel, long val) +{ + int ret = 0; + u8 *buffer; + + if (val > 255) + return -EINVAL; + + ccp->pwm[channel] = val; + + /* The Corsair Commander Pro uses values from 0-100 */ + val = val << 8; + val = val / 255; + val = val * 100; + val = val >> 8; + + buffer = kzalloc(OUT_BUFFER_SIZE, GFP_KERNEL); + if (buffer == 0) + return -ENOMEM; + + buffer[0] = CTL_SET_FAN_FPWM; + buffer[1] = channel; + buffer[2] = val; + ret = send_usb_cmd(ccp, buffer); + + kfree(buffer); + return ret == 0 ? 0 : -EIO; +} + +static int get_fan_mode_label(struct ccp_device *ccp, int channel) +{ + int ret = 0; + int mode; + u8 *buffer; + + buffer = kzalloc(OUT_BUFFER_SIZE, GFP_KERNEL); + if (buffer == 0) + return -ENOMEM; + + buffer[0] = CTL_GET_FAN_CNCT; + ret = send_usb_cmd(ccp, buffer); + if (ret) + goto exit; + + mode = buffer[channel+1]; + + switch (mode) { + case 0: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d nc", channel+1); + break; + case 1: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 3pin", channel+1); + break; + case 2: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 4pin", channel+1); + break; + default: + dev_err(&ccp->hdev->dev, + "Mode Description %d not implemented", mode); + break; + } + +exit: + kfree(buffer); + return ret == 0 ? 0 : -EIO; +} + +static int get_voltages(struct ccp_device *ccp, int channel, long *val) +{ + int ret = 0; + + ret = get_data(ccp, CTL_GET_VOLT, channel, val); + + return ret == 0 ? 0 : -EIO; +} + +static int get_temp(struct ccp_device *ccp, int channel, long *val) +{ + int ret = 0; + + ret = get_data(ccp, CTL_GET_TMP, channel, val); + *val = *val * 10; + + return ret == 0 ? 0 : -EIO; +} + +static int get_rpm(struct ccp_device *ccp, int channel, long *val) +{ + int ret = 0; + + if (ccp->fan_enable[channel] != 1) + return -ENODATA; + + ret = get_data(ccp, CTL_GET_FAN_RPM, channel, val); + + return ret == 0 ? 0 : -EIO; +} + +static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + int ret = 0; + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_label: + ret = get_fan_mode_label(ccp, channel); + *str = ccp->fan_label[channel]; + break; + default: + ret = -EINVAL; + break; + } + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int ccp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + int ret = 0; + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + ret = get_temp(ccp, channel, val); + break; + default: + ret = -EINVAL; + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + ret = get_rpm(ccp, channel, val); + break; + case hwmon_fan_enable: + *val = ccp->fan_enable[channel]; + break; + default: + ret = -EINVAL; + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + *val = ccp->pwm[channel]; + break; + default: + ret = -EINVAL; + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + ret = get_voltages(ccp, channel, val); + break; + default: + ret = -EINVAL; + break; + } + break; + default: + ret = -EINVAL; + } + return ret; +}; + +static int ccp_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + int ret = 0; + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_enable: + ccp->fan_enable[channel] = val; + break; + default: + ret = -EINVAL; + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + set_pwm(ccp, channel, val); + break; + default: + ret = -EINVAL; + break; + } + break; + default: + ret = -EINVAL; + break; + } + return ret; +}; + +static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return 0644; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + return 0444; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_label: + return 0444; + case hwmon_fan_enable: + return 0644; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0644; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + return 0444; + } + break; + default: + break; + } + return 0; +}; + +static const struct hwmon_ops ccp_hwmon_ops = { + .is_visible = ccp_is_visible, + .read = ccp_read, + .write = ccp_write, + .read_string = ccp_read_string, +}; + +static const struct hwmon_channel_info *ccp_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX, + HWMON_T_INPUT | HWMON_T_MAX, + HWMON_T_INPUT | HWMON_T_MAX, + HWMON_T_INPUT | HWMON_T_MAX + ), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL + ), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT + ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT + ), + NULL +}; + +static const struct hwmon_chip_info ccp_chip_info = { + .ops = &ccp_hwmon_ops, + .info = ccp_info, + +}; + +static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct ccp_device *ccp; + int ret = 0; + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "hid_parse failed\n"); + goto exit; + } + + ccp = devm_kzalloc(&hdev->dev, sizeof(struct ccp_device), GFP_KERNEL); + if (ccp == NULL) + goto exit; + + mutex_init(&ccp->mutex); + + ccp->fan_enable[0] = 1; + ccp->fan_enable[1] = 1; + ccp->fan_enable[2] = 1; + ccp->fan_enable[3] = 1; + ccp->fan_enable[4] = 1; + ccp->fan_enable[5] = 1; + + hid_set_drvdata(hdev, ccp); + + ccp->hdev = hdev; + ccp->hwmondev = devm_hwmon_device_register_with_info(&hdev->dev, + "corsaircpro", + ccp, + &ccp_chip_info, + 0); + +exit: + return ret; +} + +static void ccp_remove(struct hid_device *hdev) +{ + struct ccp_device *ccp; + + ccp = hid_get_drvdata(hdev); + mutex_destroy(&ccp->mutex); +} + +static const struct hid_device_id ccp_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, + USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, + USB_PRODUCT_ID_CORSAIR_1000D) }, + { } +}; + +static struct hid_driver ccp_driver = { + .name = "corsair-cpro", + .id_table = ccp_devices, + .probe = ccp_probe, + .remove = ccp_remove +}; + +MODULE_DEVICE_TABLE(hid, ccp_devices); +MODULE_LICENSE("GPL v2"); + +module_hid_driver(ccp_driver); -- 2.27.0