[PATCH 00/10] Patches to get dm814x-evm booting to NFSroot

From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Brian Hutchinson <b.hutchman@gmail.com>,
	Delio Brignoli <dbrignoli@audioscience.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Matthijs van Duin <matthijsvanduin@gmail.com>,
	Philipp Rosenberger <ilu@linutronix.de>
Subject: [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot
Date: Tue,  1 Dec 2015 15:38:13 -0800	[thread overview]
Message-ID: <1449013103-23238-1-git-send-email-tony@atomide.com> (raw)

Hi all,

Here are some fixes for v4.5 merge window to get dm814x-evm booting.
While hp t410 boots based on the bootloader clocks, dm814x-evm needs
more things configured. Especially the clock dts entries were all
wrong and just happened to be harmless on hp t410.

To boot, you probably want to use v4.4-rc3 because of commit 29f5b34ca1a1
("arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data") and also
manually apply commit 0db19b850468 ("net: cpsw: Fix ethernet regression
for dm814x") from Linux next.

I have more changes coming up after this series after I clean them
up a bit. Here's a brief status update for people:

What's working after this series on dm814x-evm and hp t410:

- Timers

- Serial

- Ethernet

- DMA

- I2C (only tested so far with i2cdetect -r 0)

- GPIO (only tested with additional MMC patches for card detect)

I have the following additional patches coming soonish:

- Basic ADPLL clock driver

- MMC support

- USB support

- Minimal j5eco-evm support

Should work with just configuration:

- [PATCH 0/3] pwm: omap: Add PWM support using dual-mode timers

I'm not working on any of the accelerators or graphics FYI. If somebody
has patches coming for those please notify on the linux-omap and
linux-arm-kernel mailings lists so we can avoid duplicate work.

Cheers,

Tony

Tony Lindgren (10):
  ARM: OMAP2+: Fix timer entries for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: OMAP2+: Disable GPIO softreset for dm81xx
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: dts: Fix dm814x entries for pllss and prcm
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: dts: Fix dm8148 control modules ranges
  ARM: dts: Fix dm814x pinctrl address and mask

 arch/arm/boot/dts/dm814x-clocks.dtsi       | 109 +++++++++++++++++++++--------
 arch/arm/boot/dts/dm814x.dtsi              |  25 ++++---
 arch/arm/mach-omap2/io.c                   |   3 +-
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c |  15 ++--
 arch/arm/mach-omap2/prm_common.c           |   6 ++
 drivers/clk/ti/clk-814x.c                  |   4 ++
 include/linux/clk/ti.h                     |   1 +
 7 files changed, 117 insertions(+), 46 deletions(-)

-- 
2.6.2