From: Eric Anholt <eric@anholt.net>
To: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Stephen Warren <swarren@wwwdotorg.org>,
Lee Jones <lee@kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Mike Turquette <mturquette@baylibre.com>,
devicetree@vger.kernel.org, Eric Anholt <eric@anholt.net>
Subject: [PATCH v2 2/3] clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.
Date: Tue, 15 Dec 2015 15:35:58 -0800 [thread overview]
Message-ID: <1450222559-22461-2-git-send-email-eric@anholt.net> (raw)
In-Reply-To: <1450222559-22461-1-git-send-email-eric@anholt.net>
There are a pair of SPI masters and a mini UART that were last minute
additions. As a result, they didn't get integrated in the same way as
the other gates off of the VPU clock in CPRMAN.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
v2: Make the binding cover both the IRQ and clock enable registers.
Use devm_ allocation, ioremap, and and clock get functions. Don't
return the error from of_clk_add_provider(), since that would
leave the clocks registered, but their registers unmapped. Trim
includes.
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-bcm2835-aux.c | 85 +++++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
create mode 100644 drivers/clk/bcm/clk-bcm2835-aux.c
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 3fc9506..183484c 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
+obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
diff --git a/drivers/clk/bcm/clk-bcm2835-aux.c b/drivers/clk/bcm/clk-bcm2835-aux.c
new file mode 100644
index 0000000..e4f89e2
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835-aux.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/bcm2835.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+
+#define BCM2835_AUXIRQ 0x00
+#define BCM2835_AUXENB 0x04
+
+static int bcm2835_aux_clk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk_onecell_data *onecell;
+ const char *parent;
+ struct clk *parent_clk;
+ struct resource *res;
+ void __iomem *reg, *gate;
+
+ parent_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(parent_clk))
+ return PTR_ERR(parent_clk);
+ parent = __clk_get_name(parent_clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(dev, res);
+ if (!reg)
+ return -ENODEV;
+
+ onecell = devm_kmalloc(dev, sizeof(*onecell), GFP_KERNEL);
+ if (!onecell)
+ return -ENOMEM;
+ onecell->clk_num = BCM2835_AUX_CLOCK_COUNT;
+ onecell->clks = devm_kcalloc(dev, BCM2835_AUX_CLOCK_COUNT,
+ sizeof(*onecell->clks), GFP_KERNEL);
+ if (!onecell->clks)
+ return -ENOMEM;
+
+ gate = reg + BCM2835_AUXENB;
+ onecell->clks[BCM2835_AUX_CLOCK_UART] =
+ clk_register_gate(dev, "aux_uart", parent, 0, gate, 0, 0, NULL);
+
+ onecell->clks[BCM2835_AUX_CLOCK_SPI1] =
+ clk_register_gate(dev, "aux_spi1", parent, 0, gate, 1, 0, NULL);
+
+ onecell->clks[BCM2835_AUX_CLOCK_SPI2] =
+ clk_register_gate(dev, "aux_spi2", parent, 0, gate, 2, 0, NULL);
+
+ of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get, onecell);
+
+ return 0;
+}
+
+static const struct of_device_id bcm2835_aux_clk_of_match[] = {
+ { .compatible = "brcm,bcm2835-aux", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_aux_clk_of_match);
+
+static struct platform_driver bcm2835_aux_clk_driver = {
+ .driver = {
+ .name = "bcm2835-aux-clk",
+ .of_match_table = bcm2835_aux_clk_of_match,
+ },
+ .probe = bcm2835_aux_clk_probe,
+};
+builtin_platform_driver(bcm2835_aux_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 auxiliary peripheral clock driver");
+MODULE_LICENSE("GPL v2");
--
2.6.2
next prev parent reply other threads:[~2015-12-15 23:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 23:35 [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates Eric Anholt
2015-12-15 23:35 ` Eric Anholt [this message]
2015-12-23 20:46 ` [PATCH v2 2/3] clk: bcm2835: Add a driver " Michael Turquette
2015-12-15 23:35 ` [PATCH v2 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree Eric Anholt
2015-12-16 10:35 ` Stefan Wahren
2015-12-19 4:19 ` [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates Rob Herring
2015-12-23 20:46 ` Michael Turquette
2015-12-24 23:45 ` Eric Anholt
2015-12-28 22:39 ` Michael Turquette
2015-12-29 22:15 ` Rob Herring
2015-12-30 9:29 ` Arnd Bergmann
2015-12-31 0:18 ` Michael Turquette
2016-01-02 18:14 ` Eric Anholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450222559-22461-2-git-send-email-eric@anholt.net \
--to=eric@anholt.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).