linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yakir Yang <ykk@rock-chips.com>
To: Inki Dae <inki.dae@samsung.com>,
	Mark Yao <mark.yao@rock-chips.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Heiko Stuebner <heiko@sntech.de>
Cc: Thierry Reding <treding@nvidia.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@arm.linux.org.uk>,
	emil.l.velikov@gmail.com,
	Gustavo Padovan <gustavo.padovan@collabora.co.uk>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	javier@osg.samsung.com, Andy Yan <andy.yan@rock-chips.com>,
	Yakir Yang <ykk@rock-chips.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 09/19] phy: Add driver for rockchip Display Port PHY
Date: Wed, 16 Dec 2015 11:40:57 +0800	[thread overview]
Message-ID: <1450237257-2208-1-git-send-email-ykk@rock-chips.com> (raw)
In-Reply-To: <1450236018-1118-1-git-send-email-ykk@rock-chips.com>

Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v11: None
Changes in v10:
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
    BIT(4) -> BIT(20)

Changes in v9:
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.

Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)

Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)

Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
  the exist "grf" syscon already. And rename the example DT node from
  "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
  struct" to "static const struct". And correct the input paramters of
  devm_phy_create() interfaces. (Heiko)

Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
  function, move those code to probe() method. And remove driver .owner
  number. (Kishon)

Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
  power control. (Heiko)

Changes in v2: None

 drivers/phy/Kconfig           |   7 ++
 drivers/phy/Makefile          |   1 +
 drivers/phy/phy-rockchip-dp.c | 151 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 159 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-dp.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.
 
+config PHY_ROCKCHIP_DP
+	tristate "Rockchip Display Port PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip Display Port PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 0000000..3cb3bf8
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+
+#define GRF_SOC_CON12                           0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER               BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK           BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON                    0
+#define GRF_EDP_PHY_SIDDQ_OFF                   BIT(5)
+
+struct rockchip_dp_phy {
+	struct device  *dev;
+	struct regmap  *grf;
+	struct clk     *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+	int ret;
+
+	if (enable) {
+		ret = regmap_write(dp->grf, GRF_SOC_CON12,
+				   GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+				   GRF_EDP_PHY_SIDDQ_ON);
+		if (ret < 0) {
+			dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(dp->phy_24m);
+	} else {
+		clk_disable_unprepare(dp->phy_24m);
+
+		ret = regmap_write(dp->grf, GRF_SOC_CON12,
+				   GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+				   GRF_EDP_PHY_SIDDQ_OFF);
+	}
+
+	return ret;
+}
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	return rockchip_set_phy_state(phy, true);
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	return rockchip_set_phy_state(phy, false);
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct rockchip_dp_phy *dp;
+	struct phy *phy;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (IS_ERR(dp))
+		return -ENOMEM;
+
+	dp->dev = dev;
+
+	dp->phy_24m = devm_clk_get(dev, "24m");
+	if (IS_ERR(dp->phy_24m)) {
+		dev_err(dev, "cannot get clock 24m\n");
+		return PTR_ERR(dp->phy_24m);
+	}
+
+	ret = clk_set_rate(dp->phy_24m, 24000000);
+	if (ret < 0) {
+		dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
+		return ret;
+	}
+
+	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(dp->grf)) {
+		dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
+		return PTR_ERR(dp->grf);
+	}
+
+	ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
+			   GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK);
+	if (ret != 0) {
+		dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
+		return ret;
+	}
+
+	phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, dp);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3288-dp-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
+
+static struct platform_driver rockchip_dp_phy_driver = {
+	.probe		= rockchip_dp_phy_probe,
+	.driver		= {
+		.name	= "rockchip-dp-phy",
+		.of_match_table = rockchip_dp_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_dp_phy_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip DP PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1



  parent reply	other threads:[~2015-12-16  3:43 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-16  3:20 [PATCH v11 0/19] Add Analogix Core Display Port Driver Yakir Yang
2015-12-16  3:22 ` [PATCH v11 01/19] drm: bridge: analogix/dp: split exynos dp driver to bridge directory Yakir Yang
2015-12-16  3:26 ` [PATCH v11 02/19] drm: bridge: analogix/dp: fix some obvious code style Yakir Yang
2015-12-22 12:05   ` Jingoo Han
2015-12-23  0:50     ` Yakir Yang
2015-12-16  3:28 ` [PATCH v11 03/19] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-12-22 12:09   ` Jingoo Han
2015-12-23  0:49     ` Yakir Yang
2015-12-16  3:30 ` [PATCH v11 04/19] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-12-16  3:32 ` [PATCH v11 05/19] dt-bindings: add document for analogix display port driver Yakir Yang
2015-12-16  3:34 ` [PATCH v11 06/19] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-12-22 12:13   ` Jingoo Han
2015-12-23  0:47     ` Yakir Yang
2015-12-16  3:36 ` [PATCH v11 07/19] drm: rockchip: dp: add rockchip platform dp driver Yakir Yang
2015-12-16  3:38 ` [PATCH v11 08/19] dt-bindings: add document for rockchip variant of analogix_dp Yakir Yang
2015-12-16  3:40 ` Yakir Yang [this message]
2015-12-22 12:20   ` [PATCH v11 09/19] phy: Add driver for rockchip Display Port PHY Jingoo Han
2015-12-23  0:46     ` Yakir Yang
2015-12-16  3:43 ` [PATCH v11 10/19] dt-bindings: add document for rockchip dp phy Yakir Yang
2015-12-16  3:45 ` [PATCH v11 11/19] drm: rockchip: vop: add bpc and color mode setting Yakir Yang
2015-12-16  3:47 ` [PATCH v11 12/19] drm: bridge: analogix/dp: add some rk3288 special registers setting Yakir Yang
2015-12-16  3:49 ` [PATCH v11 13/19] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-12-16  3:51 ` [PATCH v11 14/19] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-12-16  3:53 ` [PATCH v11 15/19] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-12-16  3:55 ` [PATCH v11 16/19] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang
2015-12-16  3:57 ` [PATCH v11 17/19] drm: bridge: analogix/dp: expand the look time for waiting AUX CH reply Yakir Yang
2015-12-22 12:26   ` Jingoo Han
2015-12-23  4:24     ` Yakir Yang
2015-12-23  6:00       ` Yakir Yang
2015-12-23 15:15         ` Jingoo Han
2015-12-16  3:59 ` [PATCH v11 18/19] drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time Yakir Yang
2015-12-16  4:01 ` [PATCH v11 19/19] drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time Yakir Yang
2015-12-17 23:51 ` [PATCH v11 0/19] Add Analogix Core Display Port Driver Heiko Stübner
2015-12-18  0:38   ` Yakir Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450237257-2208-1-git-send-email-ykk@rock-chips.com \
    --to=ykk@rock-chips.com \
    --cc=andy.yan@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.l.velikov@gmail.com \
    --cc=gustavo.padovan@collabora.co.uk \
    --cc=heiko@sntech.de \
    --cc=inki.dae@samsung.com \
    --cc=javier@osg.samsung.com \
    --cc=jingoohan1@gmail.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.yao@rock-chips.com \
    --cc=robh+dt@kernel.org \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).