From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966011AbbLPPqE (ORCPT ); Wed, 16 Dec 2015 10:46:04 -0500 Received: from faui40.informatik.uni-erlangen.de ([131.188.34.40]:45454 "EHLO faui40.informatik.uni-erlangen.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965885AbbLPPoI (ORCPT ); Wed, 16 Dec 2015 10:44:08 -0500 From: Anton Wuerfel To: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman , Jiri Slaby , "James E.J. Bottomley" , Helge Deller , Peter Hurley , Heikki Krogerus , Andy Shevchenko , Qipeng Zha , Desmond Liu , Wang Long , Matt Redfearn , Paul Burton , Ralf Baechle , Krzysztof Kozlowski , Peter Hung , Soeren Grunewald , Adam Lee , "Maciej S. Szmigiero" , Mans Rullgard , linux-kernel@vger.kernel.org, linux-parisc@vger.kernel.org, linux-kernel@i4.cs.fau.de, Anton Wuerfel , Phillip Raffeck Subject: [PATCH 04/11] tty: serial: 8250: Fix multiline comment style Date: Wed, 16 Dec 2015 16:36:10 +0100 Message-Id: <1450280177-4460-5-git-send-email-anton.wuerfel@fau.de> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1450280177-4460-1-git-send-email-anton.wuerfel@fau.de> References: <1450280177-4460-1-git-send-email-anton.wuerfel@fau.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Checkpatch outputs some warnings about incorrect comment style, which is fixed by this patch. Signed-off-by: Anton Würfel Signed-off-by: Phillip Raffeck CC: linux-kernel@i4.cs.fau.de --- drivers/tty/serial/8250/8250_ingenic.c | 6 ++- drivers/tty/serial/8250/8250_pnp.c | 6 ++- drivers/tty/serial/8250/8250_port.c | 29 ++++++----- drivers/tty/serial/8250/serial_cs.c | 92 +++++++++++++++++++--------------- 4 files changed, 75 insertions(+), 58 deletions(-) diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 49394b4..c53d2501 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -153,13 +153,15 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) case UART_IER: /* Enable receive timeout interrupt with the - * receive line status interrupt */ + * receive line status interrupt + */ value |= (value & 0x4) << 2; break; case UART_MCR: /* If we have enabled modem status IRQs we should enable modem - * mode. */ + * mode. + */ ier = p->serial_in(p, UART_IER); if (ier & UART_IER_MSI) diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 1f18065..2731031 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -367,8 +367,10 @@ static const struct pnp_device_id pnp_dev_table[] = { { "PNPCXXX", UNKNOWN_DEV }, /* More unknown PnP modems */ { "PNPDXXX", UNKNOWN_DEV }, - /* Winbond CIR port, should not be probed. We should keep track - of it to prevent the legacy serial driver from probing it */ + /* + * Winbond CIR port, should not be probed. We should keep track + * of it to prevent the legacy serial driver from probing it + */ { "WEC1022", CIR_PORT }, /* * SMSC IrCC SIR/FIR port, should not be probed by serial driver diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 57ad0f2..0ec823e 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -250,9 +250,11 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, -/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement -workaround of errata A-008006 which states that tx_loadsz should be -configured less than Maximum supported fifo bytes */ + /* + * tx_loadsz is set to 63-bytes instead of 64-bytes to implement + * workaround of errata A-008006 which states that tx_loadsz should be + * configured less than Maximum supported fifo bytes + */ [PORT_16550A_FSL64] = { .name = "16550A_FSL64", .fifo_size = 64, @@ -1970,16 +1972,17 @@ int serial8250_do_startup(struct uart_port *port) serial8250_set_mctrl(port, port->mctrl); - /* Serial over Lan (SoL) hack: - Intel 8257x Gigabit ethernet chips have a - 16550 emulation, to be used for Serial Over Lan. - Those chips take a longer time than a normal - serial device to signalize that a transmission - data was queued. Due to that, the above test generally - fails. One solution would be to delay the reading of - iir. However, this is not reliable, since the timeout - is variable. So, let's just don't test if we receive - TX irq. This way, we'll never enable UART_BUG_TXEN. + /* + * Serial over Lan (SoL) hack: + * Intel 8257x Gigabit ethernet chips have a + * 16550 emulation, to be used for Serial Over Lan. + * Those chips take a longer time than a normal + * serial device to signalize that a transmission + * data was queued. Due to that, the above test generally + * fails. One solution would be to delay the reading of + * iir. However, this is not reliable, since the timeout + * is variable. So, let's just don't test if we receive + * TX irq. This way, we'll never enable UART_BUG_TXEN. */ if (up->port.flags & UPF_NO_TXEN_TEST) goto dont_test_tx_en; diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index f5270ba..a4bdcf6 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -1,35 +1,37 @@ -/*====================================================================== - - A driver for PCMCIA serial devices - - serial_cs.c 1.134 2002/05/04 05:48:53 - - The contents of this file are subject to the Mozilla Public - License Version 1.1 (the "License"); you may not use this file - except in compliance with the License. You may obtain a copy of - the License at http://www.mozilla.org/MPL/ - - Software distributed under the License is distributed on an "AS - IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - implied. See the License for the specific language governing - rights and limitations under the License. - - The initial developer of the original code is David A. Hinds - . Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - - Alternatively, the contents of this file may be used under the - terms of the GNU General Public License version 2 (the "GPL"), in which - case the provisions of the GPL are applicable instead of the - above. If you wish to allow the use of your version of this file - only under the terms of the GPL and not to allow others to use - your version of this file under the MPL, indicate your decision - by deleting the provisions above and replace them with the notice - and other provisions required by the GPL. If you do not delete - the provisions above, a recipient may use your version of this - file under either the MPL or the GPL. - -======================================================================*/ +/* + * ====================================================================== + * + * A driver for PCMCIA serial devices + * + * serial_cs.c 1.134 2002/05/04 05:48:53 + * + * The contents of this file are subject to the Mozilla Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision + * by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL. If you do not delete + * the provisions above, a recipient may use your version of this + * file under either the MPL or the GPL. + * + * ====================================================================== + */ #include #include @@ -441,16 +443,20 @@ static int simple_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i = -ENODEV, try; - /* First pass: look for a config entry that looks normal. - * Two tries: without IO aliases, then with aliases */ + /* + * First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases + */ link->config_flags |= CONF_AUTO_SET_VPP; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; - /* Second pass: try to find an entry that isn't picky about - its base address, then try to grab any standard serial port - address, and finally try to get any free port. */ + /* + * Second pass: try to find an entry that isn't picky about + * its base address, then try to grab any standard serial port + * address, and finally try to get any free port. + */ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) goto found_port; @@ -480,8 +486,10 @@ static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) if (p_dev->resource[1]->end) return -EINVAL; - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ + /* + * The quad port cards have bad CIS's, so just look for a + * window larger than 8 ports and assume it will be right + */ if (p_dev->resource[0]->end <= 8) return -EINVAL; @@ -623,8 +631,10 @@ static int serial_config(struct pcmcia_device *link) break; } - /* Another check for dual-serial cards: look for either serial or - multifunction cards that ask for appropriate IO port ranges */ + /* + * Another check for dual-serial cards: look for either serial or + * multifunction cards that ask for appropriate IO port ranges + */ if ((info->multi == 0) && (link->has_func_id) && (link->socket->pcmcia_pfc == 0) && -- 1.9.1