From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752777AbbLRLWl (ORCPT ); Fri, 18 Dec 2015 06:22:41 -0500 Received: from faui40.informatik.uni-erlangen.de ([131.188.34.40]:38979 "EHLO faui40.informatik.uni-erlangen.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752735AbbLRLWi (ORCPT ); Fri, 18 Dec 2015 06:22:38 -0500 From: Anton Wuerfel To: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman , Jiri Slaby , "James E.J. Bottomley" , Helge Deller , Peter Hurley , Heikki Krogerus , Andy Shevchenko , Qipeng Zha , Desmond Liu , Wang Long , Matt Redfearn , Paul Burton , Ralf Baechle , Krzysztof Kozlowski , Peter Hung , Soeren Grunewald , Adam Lee , "Maciej S. Szmigiero" , Mans Rullgard , linux-kernel@vger.kernel.org, linux-parisc@vger.kernel.org, linux-kernel@i4.cs.fau.de, Anton Wuerfel , Phillip Raffeck Subject: [PATCH v2 10/11] tty: serial: 8250: Replace printk by pr_* Date: Fri, 18 Dec 2015 12:22:02 +0100 Message-Id: <1450437723-2978-11-git-send-email-anton.wuerfel@fau.de> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1450437723-2978-1-git-send-email-anton.wuerfel@fau.de> References: <1450437723-2978-1-git-send-email-anton.wuerfel@fau.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch replaces printk by the corresponding variant of pr_* in order to fix checkpatch warnings. This comes with a slight change in behaviour as pr_debug is configurable via CONFIG_DYNAMIC_DEBUG, whereas printk(KERN_DEBUG ...) is not. Signed-off-by: Anton Würfel Signed-off-by: Phillip Raffeck CC: linux-kernel@i4.cs.fau.de --- drivers/tty/serial/8250/8250_core.c | 5 ++--- drivers/tty/serial/8250/8250_gsc.c | 6 ++---- drivers/tty/serial/8250/8250_hp300.c | 18 +++++++++--------- drivers/tty/serial/8250/8250_pnp.c | 6 +++--- drivers/tty/serial/8250/8250_port.c | 3 +-- 5 files changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index b60b58b..d6b4906 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1094,9 +1094,8 @@ static int __init serial8250_init(void) serial8250_isa_init_ports(); - printk(KERN_INFO "Serial: 8250/16550 driver, " - "%d ports, IRQ sharing %sabled\n", nr_uarts, - share_irqs ? "en" : "dis"); + pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n", + nr_uarts, share_irqs ? "en" : "dis"); #ifdef CONFIG_SPARC ret = sunserial_register_minors(&serial8250_reg, UART_NR); diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 2e3ea1a..a9b63d0 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -42,8 +42,7 @@ static int __init serial_init_chip(struct parisc_device *dev) * the user what they're missing. */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) - printk(KERN_INFO - "Serial: device 0x%llx not configured.\n" + pr_info("Serial: device 0x%llx not configured.\n" "Enable support for Wax, Lasi, Asp or Dino.\n", (unsigned long long)dev->hpa.start); return -ENODEV; @@ -66,8 +65,7 @@ static int __init serial_init_chip(struct parisc_device *dev) err = serial8250_register_8250_port(&uart); if (err < 0) { - printk(KERN_WARNING - "serial8250_register_8250_port returned error %d\n", err); + pr_warn("serial8250_register_8250_port returned error %d\n", err); iounmap(uart.port.membase); return err; } diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index cf566bb..9123e31 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -110,7 +110,7 @@ int __init hp300_setup_serial_console(void) /* Check for APCI console */ if (scode == 256) { #ifdef CONFIG_HPAPCI - printk(KERN_INFO "Serial console is HP APCI 1\n"); + pr_info("Serial console is HP APCI 1\n"); port.uartclk = HPAPCI_BAUD_BASE * 16; port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); @@ -118,7 +118,7 @@ int __init hp300_setup_serial_console(void) port.regshift = 2; add_preferred_console("ttyS", port.line, "9600n8"); #else - printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); return 0; #endif } else { @@ -127,7 +127,7 @@ int __init hp300_setup_serial_console(void) if (!pa) return 0; - printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + pr_info("Serial console is HP DCA at select code %d\n", scode); port.uartclk = HPDCA_BAUD_BASE * 16; port.mapbase = (pa + UART_OFFSET); @@ -141,13 +141,13 @@ int __init hp300_setup_serial_console(void) if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) add_preferred_console("ttyS", port.line, "9600n8"); #else - printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); return 0; #endif } if (early_serial_setup(&port) < 0) - printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + pr_warn("hp300_setup_serial_console(): early_serial_setup() failed.\n"); return 0; } #endif /* CONFIG_SERIAL_8250_CONSOLE */ @@ -179,8 +179,8 @@ static int hpdca_init_one(struct dio_dev *d, line = serial8250_register_8250_port(&uart); if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, uart.port.irq); + pr_notice("8250_hp300: register_serial() DCA scode %d irq %d failed\n", + d->scode, uart.port.irq); return -ENOMEM; } @@ -260,8 +260,8 @@ static int __init hp300_8250_init(void) line = serial8250_register_8250_port(&uart); if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() APCI" - " %d irq %d failed\n", i, uart.port.irq); + pr_notice("8250_hp300: register_serial() APCI %d irq %d failed\n", + i, uart.port.irq); kfree(port); continue; } diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index ffa7354..1ed67e0 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -465,9 +465,9 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) return -ENODEV; #ifdef SERIAL_DEBUG_PNP - printk(KERN_DEBUG - "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", - uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype); + pr_debug("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", + uart.port.iobase, uart.port.mapbase, + uart.port.irq, uart.port.iotype); #endif if (flags & CIR_PORT) { uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 99f709c..343d050 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1222,8 +1222,7 @@ static void autoconfig(struct uart_8250_port *up) out_lock: spin_unlock_irqrestore(&port->lock, flags); if (up->capabilities != old_capabilities) { - printk(KERN_WARNING - "ttyS%d: detected caps %08x should be %08x\n", + pr_warn("ttyS%d: detected caps %08x should be %08x\n", serial_index(port), old_capabilities, up->capabilities); } -- 1.9.1