[PATCH v2 02/11] tty: serial: 8250: Replace spaces with tabs

From: Anton Wuerfel <anton.wuerfel@fau.de>
To: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	"James E.J. Bottomley" <jejb@parisc-linux.org>,
	Helge Deller <deller@gmx.de>,
	Peter Hurley <peter@hurleysoftware.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Qipeng Zha <qipeng.zha@intel.com>,
	Desmond Liu <desmondl@broadcom.com>,
	Wang Long <long.wanglong@huawei.com>,
	Matt Redfearn <matt.redfearn@imgtec.com>,
	Paul Burton <paul.burton@imgtec.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Peter Hung <hpeter@gmail.com>,
	Soeren Grunewald <soeren.grunewald@desy.de>,
	Adam Lee <adam.lee@canonical.com>,
	"Maciej S. Szmigiero" <mail@maciej.szmigiero.name>,
	Mans Rullgard <mans@mansr.com>,
	linux-kernel@vger.kernel.org, linux-parisc@vger.kernel.org,
	linux-kernel@i4.cs.fau.de, Anton Wuerfel <anton.wuerfel@fau.de>,
	Phillip Raffeck <phillip.raffeck@fau.de>
Subject: [PATCH v2 02/11] tty: serial: 8250: Replace spaces with tabs
Date: Fri, 18 Dec 2015 12:21:54 +0100	[thread overview]
Message-ID: <1450437723-2978-3-git-send-email-anton.wuerfel@fau.de> (raw)
In-Reply-To: <1450437723-2978-1-git-send-email-anton.wuerfel@fau.de>

Indentation is changed to match the correct format of using tabs instead
of spaces wherever possible.

Signed-off-by: Anton Würfel <anton.wuerfel@fau.de>
Signed-off-by: Phillip Raffeck <phillip.raffeck@fau.de>
CC: linux-kernel@i4.cs.fau.de
---
v2: Split patch
---
 drivers/tty/serial/8250/8250_pci.c  | 12 ++++++------
 drivers/tty/serial/8250/8250_port.c |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index ccf43cb..7f9f245 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -721,7 +721,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
 	 */
 	pcibios_resource_to_bus(dev->bus, &region, &dev->resource[bar]);
 	device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
-	                | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+			| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
 	writel(device_window, p + MITE_IOWBSR1);
 
 	/* Set window access to go to RAMSEL IO address space */
@@ -1763,7 +1763,7 @@ xr17v35x_has_slave(struct serial_private *priv)
 	const int dev_id = priv->dev->device;
 
 	return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
-	        (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+		(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
 }
 
 static int
@@ -1863,8 +1863,8 @@ pci_fastcom335_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch353_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16550A;
@@ -1873,8 +1873,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch38x_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16850;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 7f3bd7b..f2e588e 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -52,7 +52,7 @@
 #define DEBUG_AUTOCONF(fmt...)	do { } while (0)
 #endif
 
-#define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
+#define BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
 
 /*
  * Here we define the default xmit fifo size used for each type of UART.
@@ -2254,7 +2254,7 @@ serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 
 void
 serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
-		          struct ktermios *old)
+			  struct ktermios *old)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned char cval;
-- 
1.9.1

