From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751630AbbLUJOP (ORCPT ); Mon, 21 Dec 2015 04:14:15 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:54407 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750881AbbLUJOM (ORCPT ); Mon, 21 Dec 2015 04:14:12 -0500 From: Kishon Vijay Abraham I To: , , , , , CC: , , , , , , , Subject: [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Date: Mon, 21 Dec 2015 14:43:17 +0530 Message-ID: <1450689201-16973-1-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This series is basically to deprecate using ctrl-module property and use corresponding syscon properties to program the control module registers. Changes from v3: *) Renamed 'tisyscon@1c24' node to 'scm_conf@1c24' Changes from v2: No changes. Changes from v1: *) Squashed the patches that replaces "ctrl-module" with "syscon-phy-power" *) Added "syscon-phy-power" for SATA dt node in OMAP5 which was missed earlier *) removed _ARM: dts: omap4: Use "syscon-otghs" instead of "ctrl-module" in USB node_. It will be done later. Changes from [1] in PHY patches include *) cleanup ti_pipe3_probe *) have mask, power_on and power_off values in usb_phy_data for omap-usb2 phy This series should be merged only after [2] Kishon Vijay Abraham I (4): ARM: dts: dra7: Add dt node for the sycon pcie ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2 ARM: dts: : Use "syscon-phy-power" instead of "ctrl-module" arch/arm/boot/dts/am4372.dtsi | 16 ++------- arch/arm/boot/dts/dra7.dtsi | 75 ++++++++++++----------------------------- arch/arm/boot/dts/omap5.dtsi | 26 ++------------ 3 files changed, 26 insertions(+), 91 deletions(-) -- 1.7.9.5