linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joshua Henderson <joshua.henderson@microchip.com>
To: <linux-kernel@vger.kernel.org>
Cc: <linux-mips@linux-mips.org>,
	Joshua Henderson <joshua.henderson@microchip.com>,
	Purna Chandra Mandal <purna.mandal@microchip.com>,
	Matt Mackall <mpm@selenic.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Kieran Bingham <kieranbingham@gmail.com>,
	Lee Jones <lee.jones@linaro.org>, Pankaj Dev <pankaj.dev@st.com>,
	Scott Branden <sbranden@broadcom.com>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Ray Jui <rjui@broadcom.com>, <linux-crypto@vger.kernel.org>
Subject: [PATCH 2/2] rng: pic32-rng: Add PIC32 RNG hardware driver
Date: Mon, 1 Feb 2016 15:41:42 -0700	[thread overview]
Message-ID: <1454366511-10640-2-git-send-email-joshua.henderson@microchip.com> (raw)
In-Reply-To: <1454366511-10640-1-git-send-email-joshua.henderson@microchip.com>

Add support for the hardware pseudo and true random number generator
peripheral found on PIC32.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
 drivers/char/hw_random/Kconfig     |   13 +++
 drivers/char/hw_random/Makefile    |    1 +
 drivers/char/hw_random/pic32-rng.c |  152 ++++++++++++++++++++++++++++++++++++
 3 files changed, 166 insertions(+)
 create mode 100644 drivers/char/hw_random/pic32-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index dbf2271..3ab0c46 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -381,6 +381,19 @@ config HW_RANDOM_STM32
 
 	  If unsure, say N.
 
+config HW_RANDOM_PIC32
+	tristate "Microchip PIC32 Random Number Generator support"
+	depends on HW_RANDOM && MACH_PIC32
+	default y
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on a PIC32.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called pic32-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5ad3976..f5a6fa7 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
 obj-$(CONFIG_HW_RANDOM_ST) += st-rng.o
 obj-$(CONFIG_HW_RANDOM_XGENE) += xgene-rng.o
 obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
+obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
diff --git a/drivers/char/hw_random/pic32-rng.c b/drivers/char/hw_random/pic32-rng.c
new file mode 100644
index 0000000..d2f32c4
--- /dev/null
+++ b/drivers/char/hw_random/pic32-rng.c
@@ -0,0 +1,152 @@
+/*
+ * PIC32 RNG driver
+ *
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2016 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/hw_random.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+#define RNGCON		0x04
+#define  TRNGEN		BIT(8)
+#define  PRNGEN		BIT(9)
+#define  PRNGCONT	BIT(10)
+#define  TRNGMOD	BIT(11)
+#define  SEEDLOAD	BIT(12)
+#define RNGPOLY1	0x08
+#define RNGPOLY2	0x0C
+#define RNGNUMGEN1	0x10
+#define RNGNUMGEN2	0x14
+#define RNGSEED1	0x18
+#define RNGSEED2	0x1C
+#define RNGRCNT		0x20
+#define  RCNT_MASK	0x7F
+
+struct pic32_rng {
+	void __iomem	*base;
+	struct hwrng	rng;
+	struct clk	*clk;
+};
+
+static int pic32_rng_read(struct hwrng *rng, void *buf, size_t max,
+			  bool wait)
+{
+	struct pic32_rng *prng = container_of(rng, struct pic32_rng, rng);
+	u64 *data = buf;
+
+	*data = ((u64)readl(prng->base + RNGNUMGEN2) << 32) +
+		readl(prng->base + RNGNUMGEN1);
+	return 4;
+}
+
+static int pic32_rng_probe(struct platform_device *pdev)
+{
+	struct pic32_rng *prng;
+	struct resource *res;
+	u32 v, t;
+	int ret;
+
+	prng = devm_kzalloc(&pdev->dev, sizeof(*prng), GFP_KERNEL);
+	if (!prng)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	prng->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(prng->base))
+		return PTR_ERR(prng->base);
+
+	prng->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(prng->clk))
+		return PTR_ERR(prng->clk);
+
+	clk_prepare_enable(prng->clk);
+
+	/* enable TRNG in enhanced mode */
+	v = readl(prng->base + RNGCON);
+	v &= ~(TRNGEN | PRNGEN | 0xff);
+	v |= TRNGMOD;
+	writel(v | TRNGEN, prng->base + RNGCON);
+
+	/* wait for valid seed */
+	usleep_range(100, 200);
+	t = readl(prng->base + RNGRCNT) & RCNT_MASK;
+	if (t < 0x2A)
+		dev_warn(&pdev->dev, "seed not generated.\n");
+
+	/* load initial seed */
+	writel(v | SEEDLOAD, prng->base + RNGCON);
+
+	/* load initial polynomial: 42bit poly */
+	writel(0x00c00003, prng->base + RNGPOLY1);
+	writel(0x00000000, prng->base + RNGPOLY2);
+
+	/* start PRNG to generate 42bit random */
+	v |= 0x2A | PRNGCONT | PRNGEN;
+	writel(v, prng->base + RNGCON);
+
+	prng->rng.name = pdev->name;
+	prng->rng.read = pic32_rng_read;
+
+	ret = hwrng_register(&prng->rng);
+	if (ret)
+		goto err_register;
+
+	platform_set_drvdata(pdev, prng);
+
+	return 0;
+
+err_register:
+	return ret;
+}
+
+static int pic32_rng_remove(struct platform_device *pdev)
+{
+	struct pic32_rng *rng = platform_get_drvdata(pdev);
+
+	hwrng_unregister(&rng->rng);
+	writel(0, rng->base + RNGCON);
+	clk_disable_unprepare(rng->clk);
+	return 0;
+}
+
+static const struct of_device_id pic32_rng_of_match[] = {
+	{ .compatible	= "microchip,pic32mzda-rng", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_rng_of_match);
+
+static struct platform_driver pic32_rng_driver = {
+	.probe		= pic32_rng_probe,
+	.remove		= pic32_rng_remove,
+	.driver		= {
+		.name	= "pic32-rng",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(pic32_rng_of_match),
+	},
+};
+
+module_platform_driver(pic32_rng_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>");
+MODULE_DESCRIPTION("Microchip PIC32 RNG Driver");
-- 
1.7.9.5

  reply	other threads:[~2016-02-01 22:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-01 22:41 [PATCH 1/2] dt/bindings: Add bindings for the PIC32 random number generator Joshua Henderson
2016-02-01 22:41 ` Joshua Henderson [this message]
2016-02-03 11:22   ` [PATCH 2/2] rng: pic32-rng: Add PIC32 RNG hardware driver Daniel Thompson
2016-02-04 16:23     ` Joshua Henderson
2016-02-08 16:03 ` [PATCH 1/2] dt/bindings: Add bindings for the PIC32 random number generator Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454366511-10640-2-git-send-email-joshua.henderson@microchip.com \
    --to=joshua.henderson@microchip.com \
    --cc=daniel.thompson@linaro.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=kieranbingham@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=mpm@selenic.com \
    --cc=pankaj.dev@st.com \
    --cc=purna.mandal@microchip.com \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).