From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754124AbcBPG4p (ORCPT ); Tue, 16 Feb 2016 01:56:45 -0500 Received: from mail-pf0-f182.google.com ([209.85.192.182]:35267 "EHLO mail-pf0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753871AbcBPG4N (ORCPT ); Tue, 16 Feb 2016 01:56:13 -0500 From: Peter Hung X-Google-Original-From: Peter Hung To: linus.walleij@linaro.org, gnurou@gmail.com, gregkh@linuxfoundation.org, andriy.shevchenko@linux.intel.com, paul.gortmaker@windriver.com, lee.jones@linaro.org, jslaby@suse.com, gnomes@lxorguk.ukuu.org.uk, peter_hong@fintek.com.tw Cc: heikki.krogerus@linux.intel.com, peter@hurleysoftware.com, soeren.grunewald@desy.de, udknight@gmail.com, adam.lee@canonical.com, arnd@arndb.de, manabian@gmail.com, scottwood@freescale.com, yamada.masahiro@socionext.com, paul.burton@imgtec.com, mans@mansr.com, matthias.bgg@gmail.com, ralf@linux-mips.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org, tom_tsai@fintek.com.tw, Peter Hung Subject: [PATCH V3 4/4] serial: 8250_pci: Remove Fintek F81504/508/512 UART driver Date: Tue, 16 Feb 2016 14:55:10 +0800 Message-Id: <1455605710-3724-5-git-send-email-hpeter+linux_kernel@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1455605710-3724-1-git-send-email-hpeter+linux_kernel@gmail.com> References: <1455605710-3724-1-git-send-email-hpeter+linux_kernel@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Remove Fintek F81504/508/512 PCIE-to-UART device driver from 8250_pci.c Paul recommed us do less code deletion to avoid confusing problem when bisect. https://lkml.org/lkml/2016/1/18/646 But this patch is sent after with following patch. 8250: 8250_f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO UART support mfd: f81504-core: Add Fintek F81504/508/512 PCIE-to-UART/GPIO core support We must remove F81504/508/512 support in 8250_pci.c and migrate to f81504-core/8250_f81504 to enable MFD support and Andy recommend me to add these this in blacklist to avoid probed by 8250_pci.c Suggested-by: Paul Gortmaker Suggested-by: Andy Shevchenko Signed-off-by: Peter Hung --- drivers/tty/serial/8250/8250_pci.c | 206 +------------------------------------ 1 file changed, 5 insertions(+), 201 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index e71ec78..24a669c 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1532,156 +1532,6 @@ pci_brcm_trumanage_setup(struct serial_private *priv, return ret; } -/* RTS will control by MCR if this bit is 0 */ -#define FINTEK_RTS_CONTROL_BY_HW BIT(4) -/* only worked with FINTEK_RTS_CONTROL_BY_HW on */ -#define FINTEK_RTS_INVERT BIT(5) - -/* We should do proper H/W transceiver setting before change to RS485 mode */ -static int pci_fintek_rs485_config(struct uart_port *port, - struct serial_rs485 *rs485) -{ - u8 setting; - u8 *index = (u8 *) port->private_data; - struct pci_dev *pci_dev = container_of(port->dev, struct pci_dev, - dev); - - pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting); - - if (!rs485) - rs485 = &port->rs485; - else if (rs485->flags & SER_RS485_ENABLED) - memset(rs485->padding, 0, sizeof(rs485->padding)); - else - memset(rs485, 0, sizeof(*rs485)); - - /* F81504/508/512 not support RTS delay before or after send */ - rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND; - - if (rs485->flags & SER_RS485_ENABLED) { - /* Enable RTS H/W control mode */ - setting |= FINTEK_RTS_CONTROL_BY_HW; - - if (rs485->flags & SER_RS485_RTS_ON_SEND) { - /* RTS driving high on TX */ - setting &= ~FINTEK_RTS_INVERT; - } else { - /* RTS driving low on TX */ - setting |= FINTEK_RTS_INVERT; - } - - rs485->delay_rts_after_send = 0; - rs485->delay_rts_before_send = 0; - } else { - /* Disable RTS H/W control mode */ - setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT); - } - - pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting); - - if (rs485 != &port->rs485) - port->rs485 = *rs485; - - return 0; -} - -static int pci_fintek_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx) -{ - struct pci_dev *pdev = priv->dev; - u8 *data; - u8 config_base; - u16 iobase; - - config_base = 0x40 + 0x08 * idx; - - /* Get the io address from configuration space */ - pci_read_config_word(pdev, config_base + 4, &iobase); - - dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); - - port->port.iotype = UPIO_PORT; - port->port.iobase = iobase; - port->port.rs485_config = pci_fintek_rs485_config; - - data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL); - if (!data) - return -ENOMEM; - - /* preserve index in PCI configuration space */ - *data = idx; - port->port.private_data = data; - - return 0; -} - -static int pci_fintek_init(struct pci_dev *dev) -{ - unsigned long iobase; - u32 max_port, i; - u32 bar_data[3]; - u8 config_base; - struct serial_private *priv = pci_get_drvdata(dev); - struct uart_8250_port *port; - - switch (dev->device) { - case 0x1104: /* 4 ports */ - case 0x1108: /* 8 ports */ - max_port = dev->device & 0xff; - break; - case 0x1112: /* 12 ports */ - max_port = 12; - break; - default: - return -EINVAL; - } - - /* Get the io address dispatch from the BIOS */ - pci_read_config_dword(dev, 0x24, &bar_data[0]); - pci_read_config_dword(dev, 0x20, &bar_data[1]); - pci_read_config_dword(dev, 0x1c, &bar_data[2]); - - for (i = 0; i < max_port; ++i) { - /* UART0 configuration offset start from 0x40 */ - config_base = 0x40 + 0x08 * i; - - /* Calculate Real IO Port */ - iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; - - /* Enable UART I/O port */ - pci_write_config_byte(dev, config_base + 0x00, 0x01); - - /* Select 128-byte FIFO and 8x FIFO threshold */ - pci_write_config_byte(dev, config_base + 0x01, 0x33); - - /* LSB UART */ - pci_write_config_byte(dev, config_base + 0x04, - (u8)(iobase & 0xff)); - - /* MSB UART */ - pci_write_config_byte(dev, config_base + 0x05, - (u8)((iobase & 0xff00) >> 8)); - - pci_write_config_byte(dev, config_base + 0x06, dev->irq); - - if (priv) { - /* re-apply RS232/485 mode when - * pciserial_resume_ports() - */ - port = serial8250_get_port(priv->line[i]); - pci_fintek_rs485_config(&port->port, NULL); - } else { - /* First init without port data - * force init to RS232 Mode - */ - pci_write_config_byte(dev, config_base + 0x07, 0x01); - } - } - - return max_port; -} - static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -2726,31 +2576,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_brcm_trumanage_setup, }, - { - .vendor = 0x1c29, - .device = 0x1104, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_fintek_setup, - .init = pci_fintek_init, - }, - { - .vendor = 0x1c29, - .device = 0x1108, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_fintek_setup, - .init = pci_fintek_init, - }, - { - .vendor = 0x1c29, - .device = 0x1112, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_fintek_setup, - .init = pci_fintek_init, - }, - /* * Default "match everything" terminator entry */ @@ -2952,9 +2777,6 @@ enum pci_board_num_t { pbn_omegapci, pbn_NETMOS9900_2s_115200, pbn_brcm_trumanage, - pbn_fintek_4, - pbn_fintek_8, - pbn_fintek_12, pbn_wch384_4, pbn_pericom_PI7C9X7951, pbn_pericom_PI7C9X7952, @@ -3757,24 +3579,6 @@ static struct pciserial_board pci_boards[] = { .reg_shift = 2, .base_baud = 115200, }, - [pbn_fintek_4] = { - .num_ports = 4, - .uart_offset = 8, - .base_baud = 115200, - .first_offset = 0x40, - }, - [pbn_fintek_8] = { - .num_ports = 8, - .uart_offset = 8, - .base_baud = 115200, - .first_offset = 0x40, - }, - [pbn_fintek_12] = { - .num_ports = 12, - .uart_offset = 8, - .base_baud = 115200, - .first_offset = 0x40, - }, [pbn_wch384_4] = { .flags = FL_BASE0, .num_ports = 4, @@ -3829,6 +3633,11 @@ static const struct pci_device_id blacklist[] = { { PCI_VDEVICE(INTEL, 0x081d), }, { PCI_VDEVICE(INTEL, 0x1191), }, { PCI_VDEVICE(INTEL, 0x19d8), }, + + /* Fintek F81504/508/512. It'll handle by MFD f81504-core.c */ + { PCI_DEVICE(0x1c29, 0x1104), }, + { PCI_DEVICE(0x1c29, 0x1108), }, + { PCI_DEVICE(0x1c29, 0x1112), }, }; /* @@ -5610,11 +5419,6 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_exar_XR17V358 }, - /* Fintek PCI serial cards */ - { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, - { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, - { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, - /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL -- 1.9.1