From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932489AbcBZBGM (ORCPT ); Thu, 25 Feb 2016 20:06:12 -0500 Received: from down.free-electrons.com ([37.187.137.238]:35500 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932240AbcBZBGJ (ORCPT ); Thu, 25 Feb 2016 20:06:09 -0500 From: Boris Brezillon To: David Woodhouse , Brian Norris , linux-mtd@lists.infradead.org Cc: Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Ralf Baechle , linux-mips@linux-mips.org, Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Wenyou Yang , Josh Wu , Ezequiel Garcia , Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Stefan Agner , Kyungmin Park , Greg Kroah-Hartman , devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, punnaiah choudary kalluri , Priit Laes , Kamal Dasu , bcm-kernel-feedback-list@broadcom.com, linux-api@vger.kernel.org, Boris Brezillon Subject: [PATCH v3 32/52] mtd: nand: docg4: switch to mtd_ooblayout_ops Date: Fri, 26 Feb 2016 01:57:40 +0100 Message-Id: <1456448280-27788-33-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1456448280-27788-1-git-send-email-boris.brezillon@free-electrons.com> References: <1456448280-27788-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon --- drivers/mtd/nand/docg4.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index fb46fd7..f5ca9a5 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -222,10 +222,33 @@ struct docg4_priv { * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14. * Byte 15 (the last) is used by the driver as a "page written" flag. */ -static struct nand_ecclayout docg4_oobinfo = { - .eccbytes = 9, - .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15}, - .oobfree = { {.offset = 2, .length = 5} } +static int docg4_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 7; + oobregion->length = 9; + + return 0; +} + +static int docg4_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 2; + oobregion->length = 5; + + return 0; +} + +static const struct mtd_ooblayout_ops docg4_ooblayout_ops = { + .ecc = docg4_ooblayout_ecc, + .free = docg4_ooblayout_free, }; /* @@ -1209,6 +1232,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) mtd->writesize = DOCG4_PAGE_SIZE; mtd->erasesize = DOCG4_BLOCK_SIZE; mtd->oobsize = DOCG4_OOB_SIZE; + mtd_set_ooblayout(mtd, &docg4_ooblayout_ops); nand->chipsize = DOCG4_CHIP_SIZE; nand->chip_shift = DOCG4_CHIP_SHIFT; nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT; @@ -1217,7 +1241,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->pagemask = 0x3ffff; nand->badblockpos = NAND_LARGE_BADBLOCK_POS; nand->badblockbits = 8; - nand->ecc.layout = &docg4_oobinfo; nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = DOCG4_PAGE_SIZE; nand->ecc.prepad = 8; -- 2.1.4