From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
linux-mtd@lists.infradead.org
Cc: Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Wenyou Yang <wenyou.yang@atmel.com>,
Josh Wu <rainyfeeling@outlook.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com, Stefan Agner <stefan@agner.ch>,
Kyungmin Park <kyungmin.park@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
punnaiah choudary kalluri <punnaia@xilinx.com>,
Priit Laes <plaes@plaes.org>, Kamal Dasu <kdasu.kdev@gmail.com>,
bcm-kernel-feedback-list@broadcom.com, linux-api@vger.kernel.org,
Boris Brezillon <boris.brezillon@free-electrons.com>
Subject: [PATCH v3 35/52] mtd: nand: fsmc: switch to mtd_ooblayout_ops
Date: Fri, 26 Feb 2016 01:57:43 +0100 [thread overview]
Message-ID: <1456448280-27788-36-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1456448280-27788-1-git-send-email-boris.brezillon@free-electrons.com>
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/fsmc_nand.c | 298 ++++++++++++-------------------------------
1 file changed, 82 insertions(+), 216 deletions(-)
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1bdcd4f..275a98c 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -39,212 +39,6 @@
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
-static struct nand_ecclayout fsmc_ecc1_128_layout = {
- .eccbytes = 24,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
- 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- {.offset = 72, .length = 8},
- {.offset = 88, .length = 8},
- {.offset = 104, .length = 8},
- {.offset = 120, .length = 8}
- }
-};
-
-static struct nand_ecclayout fsmc_ecc1_64_layout = {
- .eccbytes = 12,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- }
-};
-
-static struct nand_ecclayout fsmc_ecc1_16_layout = {
- .eccbytes = 3,
- .eccpos = {2, 3, 4},
- .oobfree = {
- {.offset = 8, .length = 8},
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
- * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_256_layout = {
- .eccbytes = 208,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126,
- 130, 131, 132, 133, 134, 135, 136,
- 137, 138, 139, 140, 141, 142,
- 146, 147, 148, 149, 150, 151, 152,
- 153, 154, 155, 156, 157, 158,
- 162, 163, 164, 165, 166, 167, 168,
- 169, 170, 171, 172, 173, 174,
- 178, 179, 180, 181, 182, 183, 184,
- 185, 186, 187, 188, 189, 190,
- 194, 195, 196, 197, 198, 199, 200,
- 201, 202, 203, 204, 205, 206,
- 210, 211, 212, 213, 214, 215, 216,
- 217, 218, 219, 220, 221, 222,
- 226, 227, 228, 229, 230, 231, 232,
- 233, 234, 235, 236, 237, 238,
- 242, 243, 244, 245, 246, 247, 248,
- 249, 250, 251, 252, 253, 254
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 3},
- {.offset = 143, .length = 3},
- {.offset = 159, .length = 3},
- {.offset = 175, .length = 3},
- {.offset = 191, .length = 3},
- {.offset = 207, .length = 3},
- {.offset = 223, .length = 3},
- {.offset = 239, .length = 3},
- {.offset = 255, .length = 1}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_224_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 97}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_128_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 1}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
- * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_64_layout = {
- .eccbytes = 52,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 1},
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
- * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
- * byte is free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_16_layout = {
- .eccbytes = 13,
- .eccpos = { 0, 1, 2, 3, 6, 7, 8,
- 9, 10, 11, 12, 13, 14
- },
- .oobfree = {
- {.offset = 15, .length = 1},
- }
-};
-
/*
* ECC placement definitions in oobfree type format.
* There are 13 bytes of ecc for every 512 byte block and it has to be read
@@ -274,6 +68,84 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = {
}
};
+static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+
+ if (section < chip->ecc.steps - 1)
+ oobregion->length = 8;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = {
+ .ecc = fsmc_ecc1_ooblayout_ecc,
+ .free = fsmc_ecc1_ooblayout_free,
+};
+
+static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->length = chip->ecc.bytes;
+
+ if (!section && mtd->writesize <= 512)
+ oobregion->offset = 0;
+ else
+ oobregion->offset = (section * 16) + 2;
+
+ return 0;
+}
+
+static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 15;
+
+ if (section < chip->ecc.steps - 1)
+ oobregion->length = 3;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = {
+ .ecc = fsmc_ecc4_ooblayout_ecc,
+ .free = fsmc_ecc4_ooblayout_free,
+};
+
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
*
@@ -1084,23 +956,18 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (AMBA_REV_BITS(host->pid) >= 8) {
switch (mtd->oobsize) {
case 16:
- nand->ecc.layout = &fsmc_ecc4_16_layout;
host->ecc_place = &fsmc_ecc4_sp_place;
break;
case 64:
- nand->ecc.layout = &fsmc_ecc4_64_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
case 128:
- nand->ecc.layout = &fsmc_ecc4_128_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
case 224:
- nand->ecc.layout = &fsmc_ecc4_224_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
case 256:
- nand->ecc.layout = &fsmc_ecc4_256_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
default:
@@ -1109,6 +976,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
ret = -EINVAL;
goto err_probe;
}
+
+ mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
} else {
switch (nand->ecc.mode) {
case NAND_ECC_HW:
@@ -1135,13 +1004,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
switch (mtd->oobsize) {
case 16:
- nand->ecc.layout = &fsmc_ecc1_16_layout;
- break;
case 64:
- nand->ecc.layout = &fsmc_ecc1_64_layout;
- break;
case 128:
- nand->ecc.layout = &fsmc_ecc1_128_layout;
+ mtd_set_ooblayout(mtd,
+ &fsmc_ecc1_ooblayout_ops);
break;
default:
dev_warn(&pdev->dev,
--
2.1.4
next prev parent reply other threads:[~2016-02-26 1:07 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 0:57 [PATCH v3 00/52] mtd: rework ECC layout definition Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 01/52] mtd: kill the ecclayout->oobavail field Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 02/52] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 03/52] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 04/52] mtd: nand: simplify nand_bch_init() usage Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 05/52] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 06/52] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 07/52] mtd: nand: core: " Boris Brezillon
2016-02-26 14:35 ` Harvey Hunt
2016-02-26 15:10 ` Boris Brezillon
2016-02-26 15:17 ` Harvey Hunt
2016-02-26 18:33 ` Boris Brezillon
2016-02-29 10:33 ` Harvey Hunt
2016-02-26 0:57 ` [PATCH v3 08/52] mtd: nand: atmel: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 09/52] mtd: nand: fsl_ifc: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 10/52] mtd: nand: gpmi: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 11/52] mtd: nand: lpc32xx: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 12/52] mtd: nand: omap2: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 13/52] mtd: onenand: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 14/52] mtd: add mtd_set_ecclayout() helper function Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 15/52] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 16/52] mtd: nand: " Boris Brezillon
2016-03-05 2:26 ` Brian Norris
2016-03-05 8:53 ` Boris Brezillon
2016-03-05 9:01 ` Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 17/52] mtd: onenand: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 18/52] mtd: docg3: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 19/52] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 20/52] mtd: docg3: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 21/52] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 22/52] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 23/52] mtd: nand: sharpsl: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 24/52] mtd: nand: jz4740: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 25/52] mtd: nand: atmel: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 26/52] mtd: nand: bf5xx: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 27/52] mtd: nand: brcm: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 28/52] mtd: nand: cafe: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 29/52] mtd: nand: davinci: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 30/52] mtd: nand: denali: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 31/52] mtd: nand: diskonchip: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 32/52] mtd: nand: docg4: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 33/52] mtd: nand: fsl_elbc: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 34/52] mtd: nand: fsl_ifc: " Boris Brezillon
2016-02-26 0:57 ` Boris Brezillon [this message]
2016-02-26 0:57 ` [PATCH v3 36/52] mtd: nand: fsmc: get rid of the fsmc_nand_eccplace struct Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 37/52] mtd: nand: gpmi: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 38/52] mtd: nand: hisi504: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 39/52] mtd: nand: jz4780: " Boris Brezillon
2016-02-29 10:45 ` Harvey Hunt
2016-02-26 0:57 ` [PATCH v3 40/52] mtd: nand: lpc32xx: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 41/52] mtd: nand: mxc: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 42/52] mtd: nand: omap2: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 43/52] mtd: nand: pxa3xx: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 44/52] mtd: nand: s3c2410: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 45/52] mtd: nand: sh_flctl: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 46/52] mtd: nand: sm_common: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 47/52] mtd: nand: sunxi: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 48/52] mtd: nand: vf610: " Boris Brezillon
2016-02-26 19:43 ` Stefan Agner
2016-02-26 20:43 ` Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 49/52] mtd: onenand: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 50/52] staging: mt29f_spinand: " Boris Brezillon
2016-02-26 0:57 ` [PATCH v3 51/52] mtd: nand: kill the ecc->layout field Boris Brezillon
2016-02-26 0:58 ` [PATCH v3 52/52] mtd: kill the nand_ecclayout struct Boris Brezillon
2016-02-26 1:27 ` [PATCH v3 00/52] mtd: rework ECC layout definition Stefan Agner
2016-02-26 2:16 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456448280-27788-36-git-send-email-boris.brezillon@free-electrons.com \
--to=boris.brezillon@free-electrons.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=daniel@zonque.org \
--cc=devel@driverdev.osuosl.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=k.kozlowski@samsung.com \
--cc=kdasu.kdev@gmail.com \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=nicolas.ferre@atmel.com \
--cc=plaes@plaes.org \
--cc=plagnioj@jcrosoft.com \
--cc=punnaia@xilinx.com \
--cc=rainyfeeling@outlook.com \
--cc=ralf@linux-mips.org \
--cc=robert.jarzmik@free.fr \
--cc=stefan@agner.ch \
--cc=wens@csie.org \
--cc=wenyou.yang@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).