[PATCH 4/5] pwm: pwm-tipwmss: Update documentation to use empty range property

[Franklin S Cooper Jr <fcooper@ti.com>]

Since the PWMSS and its subdevices (eCAP and ePWM) use the same address
space then the range property should be empty. Update the documentation
to show the correct usage.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index f7eae77..672fa71 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -7,11 +7,9 @@ Required properties:
 		  Should set to 1.
 - size-cells: specify number of u32 entries needed to specify child nodes size
 		in reg property. Should set to 1.
-- ranges: describes the address mapping of a memory-mapped bus. Should set to
-	   physical address map of child's base address, physical address within
-	   parent's address  space and length of the address map. For am33xx,
-	   3 set of child register maps present, ECAP register space, EQEP
-	   register space, EHRPWM register space.
+- ranges: describes the address mapping of a memory-mapped bus. Its value
+	  should be empty since no address translation is needed between the
+	  parent and the child.
 
 Also child nodes should also populated under PWMSS DT node.
 
@@ -23,9 +21,7 @@ pwmss0: pwmss@48300000 {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	status = "disabled";
-	ranges = <0x48300100 0x48300100 0x80   /* ECAP */
-		  0x48300180 0x48300180 0x80   /* EQEP */
-		  0x48300200 0x48300200 0x80>; /* EHRPWM */
+	ranges;
 
 	/* child nodes go here */
 };
-- 
2.7.0