* [PATCH v5 net-next 00/10] API set for HW Buffer management
@ 2016-03-10 10:09 Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 01/10] misc: sram: add optional ioremap without write combining Gregory CLEMENT
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
Hi,
This is the fifth version of the API set for HW Buffer management (that was
initially submitted here:
http://thread.gmane.org/gmane.linux.kernel/2125152).
Since the forth I integrated fixes found by Dmitri Epshtein:
- as pointed by Marcin, a filed witth the size of the buffer of the
pool was added. It then allow to fix some misused size in the
mvneta_bm code when using the new framework.
I also added a new patch from Marcin for sram allowing to require
non-bufferable access to the memory. It was needed for the hardwre
buffer management of the mvneta.
Finally, I fixed the build issue notified by the 0-day builder when
building the drivers as module.
For the record in the previous versions I made the following changes:
v3 -> v4
- Fix build issue when HWBM is not selected
v2 -> v3
- Make a HWBM and a SWBM version of the mvneta_rx() function in order
to reduce the the conditional code. Kept a condition inside the
mvneta_poll because specializing this function would have means
duplicating 95% of the code.
- Put back the register_netdev() call at the end of the mvneta_probe()
function. In order to have a unique ID for each port, just used a
global variable in the driver.
- Added a fix from Marcin in the "net: mvneta: bm: add support for
hardware buffer management" patch: "when dropping packets, only
buffer pointers passed from BM to descriptors have to be returned to
the pool. In submitted version after closing the port and
mvneta_rxq_deinit(), it was very likely that a lot of fake buffers
are added to the pool, because all descriptors took part in
iteration."
- Removed the select MVNETA_BM from the Kconfig, it will let the user
the choice to use not use it if they want.
v1 -> v2
- The hardware buffer management helpers are no more built by default
and now depend on a hidden config symbol which has to be selected
by the driver if needed
- The hwbm_pool_refill() and hwbm_pool_add() now receive a gfp_t as
argument allowing the caller to specify the flag it needs.
- buf_num is now tested to ensure there is no wrapping
- A spinlock has been added to protect the hwbm_pool_add() function in
SMP or irq context.
- used pr_warn instead of pr_debug in case of errors.
- fixed the mvneta implementation by returning the buffer to the pool
at various place instead of ignoring it.
- Squashed "bus: mvenus-mbus: Fix size test for
mvebu_mbus_get_dram_win_info" into bus: mvebu-mbus: provide api for
obtaining IO and DRAM window information.
- Added my signed-otf-by on all the patches as submitter of the series.
- Renamed the dts patches with the pattern "ARM: dts: platform:"
- Removed the patch "ARM: mvebu: enable SRAM support in
mvebu_v7_defconfig" of this series and already applied it
- Modified the order of the patches.
In order to ease the test the branch mvneta-BM-framework-v5 is
available at git@github.com:MISL-EBU-System-SW/mainline-public.git.
Thanks,
Gregory
Gregory CLEMENT (3):
ARM: dts: armada-xp-openblocks-ax3-4: Add BM support
net: add a hardware buffer management helper API
net: mvneta: Use the new hwbm framework
Marcin Wojtas (7):
misc: sram: add optional ioremap without write combining
ARM: dts: armada-38x: add buffer manager nodes
ARM: dts: armada-38x: enable buffer manager support on Armada 38x
boards
ARM: dts: armada-xp: add buffer manager nodes
ARM: dts: armada-xp: enable buffer manager support on Armada XP boards
bus: mvebu-mbus: provide api for obtaining IO and DRAM window
information
net: mvneta: bm: add support for hardware buffer management
.../bindings/net/marvell-armada-370-neta.txt | 19 +-
.../devicetree/bindings/net/marvell-neta-bm.txt | 49 ++
Documentation/devicetree/bindings/sram/sram.txt | 5 +
arch/arm/boot/dts/armada-385-db-ap.dts | 20 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 6 +
arch/arm/boot/dts/armada-388-db.dts | 17 +-
arch/arm/boot/dts/armada-388-gp.dts | 17 +-
.../arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 15 +-
arch/arm/boot/dts/armada-38x.dtsi | 19 +
arch/arm/boot/dts/armada-xp-db.dts | 19 +-
arch/arm/boot/dts/armada-xp-gp.dts | 19 +-
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 19 +-
arch/arm/boot/dts/armada-xp.dtsi | 19 +
drivers/bus/mvebu-mbus.c | 52 +++
drivers/misc/sram.c | 5 +-
drivers/net/ethernet/marvell/Kconfig | 14 +
drivers/net/ethernet/marvell/Makefile | 1 +
drivers/net/ethernet/marvell/mvneta.c | 509 +++++++++++++++++++--
drivers/net/ethernet/marvell/mvneta_bm.c | 487 ++++++++++++++++++++
drivers/net/ethernet/marvell/mvneta_bm.h | 182 ++++++++
include/linux/mbus.h | 3 +
include/net/hwbm.h | 28 ++
net/Kconfig | 3 +
net/core/Makefile | 1 +
net/core/hwbm.c | 87 ++++
25 files changed, 1568 insertions(+), 47 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/marvell-neta-bm.txt
create mode 100644 drivers/net/ethernet/marvell/mvneta_bm.c
create mode 100644 drivers/net/ethernet/marvell/mvneta_bm.h
create mode 100644 include/net/hwbm.h
create mode 100644 net/core/hwbm.c
--
2.5.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 01/10] misc: sram: add optional ioremap without write combining
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 02/10] ARM: dts: armada-38x: add buffer manager nodes Gregory CLEMENT
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
From: Marcin Wojtas <mw@semihalf.com>
Some SRAM users may require non-bufferable access to the memory, which is
impossible, because devm_ioremap_wc() is used for setting sram->virt_base.
This commit adds optional flag 'no-memory-wc', which allow to choose remap
method, using DT property. Documentation is updated accordingly.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Documentation/devicetree/bindings/sram/sram.txt | 5 +++++
drivers/misc/sram.c | 5 ++++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt
index 42ee9438b771..227e3a341af1 100644
--- a/Documentation/devicetree/bindings/sram/sram.txt
+++ b/Documentation/devicetree/bindings/sram/sram.txt
@@ -25,6 +25,11 @@ Required properties in the sram node:
- ranges : standard definition, should translate from local addresses
within the sram to bus addresses
+Optional properties in the sram node:
+
+- no-memory-wc : the flag indicating, that SRAM memory region has not to
+ be remapped as write combining. WC is used by default.
+
Required properties in the area nodes:
- reg : iomem address range, relative to the SRAM range
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index 736dae715dbf..69cdabea9c03 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -360,7 +360,10 @@ static int sram_probe(struct platform_device *pdev)
return -EBUSY;
}
- sram->virt_base = devm_ioremap_wc(sram->dev, res->start, size);
+ if (of_property_read_bool(pdev->dev.of_node, "no-memory-wc"))
+ sram->virt_base = devm_ioremap(sram->dev, res->start, size);
+ else
+ sram->virt_base = devm_ioremap_wc(sram->dev, res->start, size);
if (IS_ERR(sram->virt_base))
return PTR_ERR(sram->virt_base);
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 02/10] ARM: dts: armada-38x: add buffer manager nodes
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 01/10] misc: sram: add optional ioremap without write combining Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 03/10] ARM: dts: armada-38x: enable buffer manager support on Armada 38x boards Gregory CLEMENT
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
From: Marcin Wojtas <mw@semihalf.com>
Armada 38x network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.
Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-38x.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index e8b7f6726772..066a8f06405c 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -540,6 +540,14 @@
status = "disabled";
};
+ bm: bm@c8000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc8000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@@ -618,6 +626,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
};
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ no-memory-wc;
+ status = "disabled";
+ };
};
clocks {
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 03/10] ARM: dts: armada-38x: enable buffer manager support on Armada 38x boards
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 01/10] misc: sram: add optional ioremap without write combining Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 02/10] ARM: dts: armada-38x: add buffer manager nodes Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 04/10] ARM: dts: armada-xp: add buffer manager nodes Gregory CLEMENT
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
From: Marcin Wojtas <mw@semihalf.com>
Since mvneta driver supports using hardware buffer management (BM), in
order to use it, board files have to be adjusted accordingly. This commit
enables BM on:
* A385-DB-AP - each port has its own pool for long and common pool for
short packets,
* A388-ClearFog - same as above,
* A388-DB - to each port unique 'short' and 'long' pools are mapped,
* A388-GP - same as above.
Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
[gregory.clement@free-electrons.com: add suppport for the ClearFog board]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/boot/dts/armada-385-db-ap.dts | 20 +++++++++++++++++++-
arch/arm/boot/dts/armada-388-clearfog.dts | 6 ++++++
arch/arm/boot/dts/armada-388-db.dts | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-388-gp.dts | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 15 ++++++++++++++-
5 files changed, 71 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index acd5b1519edb..5f9451be21ff 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -61,7 +61,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi1: spi@10680 {
@@ -138,12 +139,18 @@
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
};
ethernet@34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
ethernet@70000 {
@@ -157,6 +164,13 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
+ };
+
+ bm@c8000 {
+ status = "okay";
};
nfc: flash@d0000 {
@@ -178,6 +192,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index c6e180eb3b11..c60206efb583 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -78,6 +78,9 @@
internal-regs {
ethernet@30000 {
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <1>;
status = "okay";
fixed-link {
@@ -88,6 +91,9 @@
ethernet@34000 {
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ bm,pool-short = <1>;
status = "okay";
fixed-link {
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index ff47af57f091..ea93ed727030 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -66,7 +66,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
@@ -99,6 +100,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
usb@58000 {
@@ -109,6 +113,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};
mdio@72004 {
@@ -129,6 +136,10 @@
status = "okay";
};
+ bm@c8000 {
+ status = "okay";
+ };
+
flash@d0000 {
status = "okay";
num-cs = <1>;
@@ -169,6 +180,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index cd316021d6ce..466b01eb1038 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -60,7 +60,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
@@ -133,6 +134,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
/* CON4 */
@@ -152,6 +156,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};
@@ -186,6 +193,10 @@
};
};
+ bm@c8000 {
+ status = "okay";
+ };
+
sata@e0000 {
pinctrl-names = "default";
pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -240,6 +251,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 3f792a563c05..8c9842237b60 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -58,7 +58,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
ethernet@70000 {
@@ -66,6 +67,9 @@
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
status = "okay";
};
@@ -110,6 +114,15 @@
pinctrl-names = "default";
status = "okay";
};
+
+ bm@c8000 {
+ status = "okay";
+ };
};
+
+ bm-bppi {
+ status = "okay";
+ };
+
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 04/10] ARM: dts: armada-xp: add buffer manager nodes
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (2 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 03/10] ARM: dts: armada-38x: enable buffer manager support on Armada 38x boards Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 05/10] ARM: dts: armada-xp: enable buffer manager support on Armada XP boards Gregory CLEMENT
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
From: Marcin Wojtas <mw@semihalf.com>
Armada XP network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-xp.dtsi - for the actual common BM unit (bm@c0000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.
Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-xp.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index be23196829bb..553349c07f28 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -253,6 +253,14 @@
marvell,crypto-sram-size = <0x800>;
};
+ bm: bm@c0000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc0000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
@@ -291,6 +299,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ no-memory-wc;
+ status = "disabled";
+ };
};
clocks {
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 05/10] ARM: dts: armada-xp: enable buffer manager support on Armada XP boards
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (3 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 04/10] ARM: dts: armada-xp: add buffer manager nodes Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 06/10] ARM: dts: armada-xp-openblocks-ax3-4: Add BM support Gregory CLEMENT
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
From: Marcin Wojtas <mw@semihalf.com>
Since mvneta driver supports using hardware buffer management (BM), in
order to use it, board files have to be adjusted accordingly. This commit
enables BM on AXP-DB and AXP-GP in same manner - because number of ports
on those boards is the same as number of possible pools, each port is
supposed to use single pool for all kind of packets.
Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-xp-db.dts | 19 ++++++++++++++++++-
arch/arm/boot/dts/armada-xp-gp.dts | 19 ++++++++++++++++++-
2 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f774101416a5..30657302305d 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -77,7 +77,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -181,21 +182,33 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ };
+
+ bm@c0000 {
+ status = "okay";
};
mvsdio@d4000 {
@@ -230,5 +243,9 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 4878d7353069..a1ded01d0c07 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -96,7 +96,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -196,21 +197,29 @@
status = "okay";
phy = <&phy0>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
};
/* Front-side USB slot */
@@ -235,6 +244,10 @@
};
};
+ bm@c0000 {
+ status = "okay";
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
@@ -243,5 +256,9 @@
nand-on-flash-bbt;
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 06/10] ARM: dts: armada-xp-openblocks-ax3-4: Add BM support
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (4 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 05/10] ARM: dts: armada-xp: enable buffer manager support on Armada XP boards Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 07/10] bus: mvebu-mbus: provide api for obtaining IO and DRAM window information Gregory CLEMENT
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
Allow Openblock AX3 using hardware buffer management with mvneta.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index a5db17782e08..3aa29a91c7b8 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -67,7 +67,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -176,21 +177,29 @@
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
};
i2c@11000 {
status = "okay";
@@ -219,6 +228,14 @@
usb@51000 {
status = "okay";
};
+
+ bm@c0000 {
+ status = "okay";
+ };
+ };
+
+ bm-bppi {
+ status = "okay";
};
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 07/10] bus: mvebu-mbus: provide api for obtaining IO and DRAM window information
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (5 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 06/10] ARM: dts: armada-xp-openblocks-ax3-4: Add BM support Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 08/10] net: mvneta: bm: add support for hardware buffer management Gregory CLEMENT
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba, Evan Wang
From: Marcin Wojtas <mw@semihalf.com>
This commit enables finding appropriate mbus window and obtaining its
target id and attribute for given physical address in two separate
routines, both for IO and DRAM windows. This functionality
is needed for Armada XP/38x Network Controller's Buffer Manager and
PnC configuration.
[gregory.clement@free-electrons.com: Fix size test for
mvebu_mbus_get_dram_win_info]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
[DRAM window information reference in LKv3.10]
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
drivers/bus/mvebu-mbus.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mbus.h | 3 +++
2 files changed, 55 insertions(+)
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index c43c3d2baf73..c2e52864bb03 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -948,6 +948,58 @@ void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
*res = mbus_state.pcie_io_aperture;
}
+int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
+{
+ const struct mbus_dram_target_info *dram;
+ int i;
+
+ /* Get dram info */
+ dram = mv_mbus_dram_info();
+ if (!dram) {
+ pr_err("missing DRAM information\n");
+ return -ENODEV;
+ }
+
+ /* Try to find matching DRAM window for phyaddr */
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ if (cs->base <= phyaddr &&
+ phyaddr <= (cs->base + cs->size - 1)) {
+ *target = dram->mbus_dram_target_id;
+ *attr = cs->mbus_attr;
+ return 0;
+ }
+ }
+
+ pr_err("invalid dram address 0x%x\n", phyaddr);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);
+
+int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target,
+ u8 *attr)
+{
+ int win;
+
+ for (win = 0; win < mbus_state.soc->num_wins; win++) {
+ u64 wbase;
+ int enabled;
+
+ mvebu_mbus_read_window(&mbus_state, win, &enabled, &wbase,
+ size, target, attr, NULL);
+
+ if (!enabled)
+ continue;
+
+ if (wbase <= phyaddr && phyaddr <= wbase + *size)
+ return win;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_io_win_info);
+
static __init int mvebu_mbus_debugfs_init(void)
{
struct mvebu_mbus_state *s = &mbus_state;
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
index 1f7bc630d225..ea34a867caa0 100644
--- a/include/linux/mbus.h
+++ b/include/linux/mbus.h
@@ -69,6 +69,9 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(vo
int mvebu_mbus_save_cpu_target(u32 *store_addr);
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
+int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr);
+int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target,
+ u8 *attr);
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
unsigned int attribute,
phys_addr_t base, size_t size,
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 08/10] net: mvneta: bm: add support for hardware buffer management
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (6 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 07/10] bus: mvebu-mbus: provide api for obtaining IO and DRAM window information Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 09/10] net: add a hardware buffer management helper API Gregory CLEMENT
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
From: Marcin Wojtas <mw@semihalf.com>
Buffer manager (BM) is a dedicated hardware unit that can be used by all
ethernet ports of Armada XP and 38x SoC's. It allows to offload CPU on RX
path by sparing DRAM access on refilling buffer pool, hardware-based
filling of descriptor ring data and better memory utilization due to HW
arbitration for using 'short' pools for small packets.
Tests performed with A388 SoC working as a network bridge between two
packet generators showed increase of maximum processed 64B packets by
~20k (~555k packets with BM enabled vs ~535 packets without BM). Also
when pushing 1500B-packets with a line rate achieved, CPU load decreased
from around 25% without BM to 20% with BM.
BM comprise up to 4 buffer pointers' (BP) rings kept in DRAM, which
are called external BP pools - BPPE. Allocating and releasing buffer
pointers (BP) to/from BPPE is performed indirectly by write/read access
to a dedicated internal SRAM, where internal BP pools (BPPI) are placed.
BM hardware controls status of BPPE automatically, as well as assigning
proper buffers to RX descriptors. For more details please refer to
Functional Specification of Armada XP or 38x SoC.
In order to enable support for a separate hardware block, common for all
ports, a new driver has to be implemented ('mvneta_bm'). It provides
initialization sequence of address space, clocks, registers, SRAM,
empty pools' structures and also obtaining optional configuration
from DT (please refer to device tree binding documentation). mvneta_bm
exposes also a necessary API to mvneta driver, as well as a dedicated
structure with BM information (bm_priv), whose presence is used as a
flag notifying of BM usage by port. It has to be ensured that mvneta_bm
probe is executed prior to the ones in ports' driver. In case BM is not
used or its probe fails, mvneta falls back to use software buffer
management.
A sequence executed in mvneta_probe function is modified in order to have
an access to needed resources before possible port's BM initialization is
done. According to port-pools mapping provided by DT appropriate registers
are configured and the buffer pools are filled. RX path is modified
accordingly. Becaues the hardware allows a wide variety of configuration
options, following assumptions are made:
* using BM mechanisms can be selectively disabled/enabled basing
on DT configuration among the ports
* 'long' pool's single buffer size is tied to port's MTU
* using 'long' pool by port is obligatory and it cannot be shared
* using 'short' pool for smaller packets is optional
* one 'short' pool can be shared among all ports
This commit enables hardware buffer management operation cooperating with
existing mvneta driver. New device tree binding documentation is added and
the one of mvneta is updated accordingly.
[gregory.clement@free-electrons.com: removed the suspend/resume part]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
.../bindings/net/marvell-armada-370-neta.txt | 19 +-
.../devicetree/bindings/net/marvell-neta-bm.txt | 49 ++
drivers/net/ethernet/marvell/Kconfig | 13 +
drivers/net/ethernet/marvell/Makefile | 1 +
drivers/net/ethernet/marvell/mvneta.c | 507 +++++++++++++++++--
drivers/net/ethernet/marvell/mvneta_bm.c | 546 +++++++++++++++++++++
drivers/net/ethernet/marvell/mvneta_bm.h | 189 +++++++
7 files changed, 1285 insertions(+), 39 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/marvell-neta-bm.txt
create mode 100644 drivers/net/ethernet/marvell/mvneta_bm.c
create mode 100644 drivers/net/ethernet/marvell/mvneta_bm.h
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index d0cb8693963b..73be8970815e 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -18,15 +18,30 @@ Optional properties:
"core" for core clock and "bus" for the optional bus clock.
+Optional properties (valid only for Armada XP/38x):
+
+- buffer-manager: a phandle to a buffer manager node. Please refer to
+ Documentation/devicetree/bindings/net/marvell-neta-bm.txt
+- bm,pool-long: ID of a pool, that will accept all packets of a size
+ higher than 'short' pool's threshold (if set) and up to MTU value.
+ Obligatory, when the port is supposed to use hardware
+ buffer management.
+- bm,pool-short: ID of a pool, that will be used for accepting
+ packets of a size lower than given threshold. If not set, the port
+ will use a single 'long' pool for all packets, as defined above.
+
Example:
-ethernet@d0070000 {
+ethernet@70000 {
compatible = "marvell,armada-370-neta";
- reg = <0xd0070000 0x2500>;
+ reg = <0x70000 0x2500>;
interrupts = <8>;
clocks = <&gate_clk 4>;
tx-csum-limit = <9800>
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};
diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
new file mode 100644
index 000000000000..c1b1d7c3bde1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
@@ -0,0 +1,49 @@
+* Marvell Armada 380/XP Buffer Manager driver (BM)
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-neta-bm".
+- reg: address and length of the register set for the device.
+- clocks: a pointer to the reference clock for this device.
+- internal-mem: a phandle to BM internal SRAM definition.
+
+Optional properties (port):
+
+- pool<0 : 3>,capacity: size of external buffer pointers' ring maintained
+ in DRAM. Can be set for each pool (id 0 : 3) separately. The value has
+ to be chosen between 128 and 16352 and it also has to be aligned to 32.
+ Otherwise the driver would adjust a given number or choose default if
+ not set.
+- pool<0 : 3>,pkt-size: maximum size of a packet accepted by a given buffer
+ pointers' pool (id 0 : 3). It will be taken into consideration only when pool
+ type is 'short'. For 'long' ones it would be overridden by port's MTU.
+ If not set a driver will choose a default value.
+
+In order to see how to hook the BM to a given ethernet port, please
+refer to Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt.
+
+Example:
+
+- main node:
+
+bm: bm@c8000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc8000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "okay";
+ pool2,capacity = <4096>;
+ pool1,pkt-size = <512>;
+};
+
+- internal SRAM node:
+
+bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ status = "okay";
+};
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index a1c862b4664d..ac6605c62f46 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -40,6 +40,19 @@ config MVMDIO
This driver is used by the MV643XX_ETH and MVNETA drivers.
+config MVNETA_BM
+ tristate "Marvell Armada 38x/XP network interface BM support"
+ depends on MVNETA
+ ---help---
+ This driver supports auxiliary block of the network
+ interface units in the Marvell ARMADA XP and ARMADA 38x SoC
+ family, which is called buffer manager.
+
+ This driver, when enabled, strictly cooperates with mvneta
+ driver and is common for all network ports of the devices,
+ even for Armada 370 SoC, which doesn't support hardware
+ buffer management.
+
config MVNETA
tristate "Marvell Armada 370/38x/XP network interface support"
depends on PLAT_ORION
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
index f6425bd2884b..ff1bffa74803 100644
--- a/drivers/net/ethernet/marvell/Makefile
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_MVMDIO) += mvmdio.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_MVNETA_BM) += mvneta_bm.o
obj-$(CONFIG_MVNETA) += mvneta.o
obj-$(CONFIG_MVPP2) += mvpp2.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 662c2ee268c7..ade5b0b961d3 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -30,6 +30,7 @@
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/skbuff.h>
+#include "mvneta_bm.h"
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/tso.h>
@@ -37,6 +38,10 @@
/* Registers */
#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
#define MVNETA_RXQ_HW_BUF_ALLOC BIT(0)
+#define MVNETA_RXQ_SHORT_POOL_ID_SHIFT 4
+#define MVNETA_RXQ_SHORT_POOL_ID_MASK 0x30
+#define MVNETA_RXQ_LONG_POOL_ID_SHIFT 6
+#define MVNETA_RXQ_LONG_POOL_ID_MASK 0xc0
#define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8)
#define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8)
#define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2))
@@ -50,6 +55,9 @@
#define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2))
#define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16
#define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255
+#define MVNETA_PORT_POOL_BUFFER_SZ_REG(pool) (0x1700 + ((pool) << 2))
+#define MVNETA_PORT_POOL_BUFFER_SZ_SHIFT 3
+#define MVNETA_PORT_POOL_BUFFER_SZ_MASK 0xfff8
#define MVNETA_PORT_RX_RESET 0x1cc0
#define MVNETA_PORT_RX_DMA_RESET BIT(0)
#define MVNETA_PHY_ADDR 0x2000
@@ -107,6 +115,7 @@
#define MVNETA_GMAC_CLOCK_DIVIDER 0x24f4
#define MVNETA_GMAC_1MS_CLOCK_ENABLE BIT(31)
#define MVNETA_ACC_MODE 0x2500
+#define MVNETA_BM_ADDRESS 0x2504
#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
@@ -253,7 +262,10 @@
#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
#define MVNETA_TX_CSUM_DEF_SIZE 1600
#define MVNETA_TX_CSUM_MAX_SIZE 9800
-#define MVNETA_ACC_MODE_EXT 1
+#define MVNETA_ACC_MODE_EXT1 1
+#define MVNETA_ACC_MODE_EXT2 2
+
+#define MVNETA_MAX_DECODE_WIN 6
/* Timeout constants */
#define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000
@@ -293,7 +305,8 @@
((addr >= txq->tso_hdrs_phys) && \
(addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
-#define MVNETA_RX_BUF_SIZE(pkt_size) ((pkt_size) + NET_SKB_PAD)
+#define MVNETA_RX_GET_BM_POOL_ID(rxd) \
+ (((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
struct mvneta_statistic {
unsigned short offset;
@@ -359,6 +372,7 @@ struct mvneta_pcpu_port {
};
struct mvneta_port {
+ u8 id;
struct mvneta_pcpu_port __percpu *ports;
struct mvneta_pcpu_stats __percpu *stats;
@@ -389,6 +403,11 @@ struct mvneta_port {
unsigned int tx_csum_limit;
unsigned int use_inband_status:1;
+ struct mvneta_bm *bm_priv;
+ struct mvneta_bm_pool *pool_long;
+ struct mvneta_bm_pool *pool_short;
+ int bm_win_id;
+
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
@@ -414,6 +433,8 @@ struct mvneta_port {
#define MVNETA_TX_L4_CSUM_NOT BIT(31)
#define MVNETA_RXD_ERR_CRC 0x0
+#define MVNETA_RXD_BM_POOL_SHIFT 13
+#define MVNETA_RXD_BM_POOL_MASK (BIT(13) | BIT(14))
#define MVNETA_RXD_ERR_SUMMARY BIT(16)
#define MVNETA_RXD_ERR_OVERRUN BIT(17)
#define MVNETA_RXD_ERR_LEN BIT(18)
@@ -558,6 +579,9 @@ static int rxq_def;
static int rx_copybreak __read_mostly = 256;
+/* HW BM need that each port be identify by a unique ID */
+static int global_port_id;
+
#define MVNETA_DRIVER_NAME "mvneta"
#define MVNETA_DRIVER_VERSION "1.0"
@@ -824,6 +848,214 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp,
mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
}
+/* Enable buffer management (BM) */
+static void mvneta_rxq_bm_enable(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+{
+ u32 val;
+
+ val = mvreg_read(pp, MVNETA_RXQ_CONFIG_REG(rxq->id));
+ val |= MVNETA_RXQ_HW_BUF_ALLOC;
+ mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
+}
+
+/* Notify HW about port's assignment of pool for bigger packets */
+static void mvneta_rxq_long_pool_set(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+{
+ u32 val;
+
+ val = mvreg_read(pp, MVNETA_RXQ_CONFIG_REG(rxq->id));
+ val &= ~MVNETA_RXQ_LONG_POOL_ID_MASK;
+ val |= (pp->pool_long->id << MVNETA_RXQ_LONG_POOL_ID_SHIFT);
+
+ mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
+}
+
+/* Notify HW about port's assignment of pool for smaller packets */
+static void mvneta_rxq_short_pool_set(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+{
+ u32 val;
+
+ val = mvreg_read(pp, MVNETA_RXQ_CONFIG_REG(rxq->id));
+ val &= ~MVNETA_RXQ_SHORT_POOL_ID_MASK;
+ val |= (pp->pool_short->id << MVNETA_RXQ_SHORT_POOL_ID_SHIFT);
+
+ mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
+}
+
+/* Set port's receive buffer size for assigned BM pool */
+static inline void mvneta_bm_pool_bufsize_set(struct mvneta_port *pp,
+ int buf_size,
+ u8 pool_id)
+{
+ u32 val;
+
+ if (!IS_ALIGNED(buf_size, 8)) {
+ dev_warn(pp->dev->dev.parent,
+ "illegal buf_size value %d, round to %d\n",
+ buf_size, ALIGN(buf_size, 8));
+ buf_size = ALIGN(buf_size, 8);
+ }
+
+ val = mvreg_read(pp, MVNETA_PORT_POOL_BUFFER_SZ_REG(pool_id));
+ val |= buf_size & MVNETA_PORT_POOL_BUFFER_SZ_MASK;
+ mvreg_write(pp, MVNETA_PORT_POOL_BUFFER_SZ_REG(pool_id), val);
+}
+
+/* Configure MBUS window in order to enable access BM internal SRAM */
+static int mvneta_mbus_io_win_set(struct mvneta_port *pp, u32 base, u32 wsize,
+ u8 target, u8 attr)
+{
+ u32 win_enable, win_protect;
+ int i;
+
+ win_enable = mvreg_read(pp, MVNETA_BASE_ADDR_ENABLE);
+
+ if (pp->bm_win_id < 0) {
+ /* Find first not occupied window */
+ for (i = 0; i < MVNETA_MAX_DECODE_WIN; i++) {
+ if (win_enable & (1 << i)) {
+ pp->bm_win_id = i;
+ break;
+ }
+ }
+ if (i == MVNETA_MAX_DECODE_WIN)
+ return -ENOMEM;
+ } else {
+ i = pp->bm_win_id;
+ }
+
+ mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
+ mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
+
+ if (i < 4)
+ mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
+
+ mvreg_write(pp, MVNETA_WIN_BASE(i), (base & 0xffff0000) |
+ (attr << 8) | target);
+
+ mvreg_write(pp, MVNETA_WIN_SIZE(i), (wsize - 1) & 0xffff0000);
+
+ win_protect = mvreg_read(pp, MVNETA_ACCESS_PROTECT_ENABLE);
+ win_protect |= 3 << (2 * i);
+ mvreg_write(pp, MVNETA_ACCESS_PROTECT_ENABLE, win_protect);
+
+ win_enable &= ~(1 << i);
+ mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
+
+ return 0;
+}
+
+/* Assign and initialize pools for port. In case of fail
+ * buffer manager will remain disabled for current port.
+ */
+static int mvneta_bm_port_init(struct platform_device *pdev,
+ struct mvneta_port *pp)
+{
+ struct device_node *dn = pdev->dev.of_node;
+ u32 long_pool_id, short_pool_id, wsize;
+ u8 target, attr;
+ int err;
+
+ /* Get BM window information */
+ err = mvebu_mbus_get_io_win_info(pp->bm_priv->bppi_phys_addr, &wsize,
+ &target, &attr);
+ if (err < 0)
+ return err;
+
+ pp->bm_win_id = -1;
+
+ /* Open NETA -> BM window */
+ err = mvneta_mbus_io_win_set(pp, pp->bm_priv->bppi_phys_addr, wsize,
+ target, attr);
+ if (err < 0) {
+ netdev_info(pp->dev, "fail to configure mbus window to BM\n");
+ return err;
+ }
+
+ if (of_property_read_u32(dn, "bm,pool-long", &long_pool_id)) {
+ netdev_info(pp->dev, "missing long pool id\n");
+ return -EINVAL;
+ }
+
+ /* Create port's long pool depending on mtu */
+ pp->pool_long = mvneta_bm_pool_use(pp->bm_priv, long_pool_id,
+ MVNETA_BM_LONG, pp->id,
+ MVNETA_RX_PKT_SIZE(pp->dev->mtu));
+ if (!pp->pool_long) {
+ netdev_info(pp->dev, "fail to obtain long pool for port\n");
+ return -ENOMEM;
+ }
+
+ pp->pool_long->port_map |= 1 << pp->id;
+
+ mvneta_bm_pool_bufsize_set(pp, pp->pool_long->buf_size,
+ pp->pool_long->id);
+
+ /* If short pool id is not defined, assume using single pool */
+ if (of_property_read_u32(dn, "bm,pool-short", &short_pool_id))
+ short_pool_id = long_pool_id;
+
+ /* Create port's short pool */
+ pp->pool_short = mvneta_bm_pool_use(pp->bm_priv, short_pool_id,
+ MVNETA_BM_SHORT, pp->id,
+ MVNETA_BM_SHORT_PKT_SIZE);
+ if (!pp->pool_short) {
+ netdev_info(pp->dev, "fail to obtain short pool for port\n");
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_long, 1 << pp->id);
+ return -ENOMEM;
+ }
+
+ if (short_pool_id != long_pool_id) {
+ pp->pool_short->port_map |= 1 << pp->id;
+ mvneta_bm_pool_bufsize_set(pp, pp->pool_short->buf_size,
+ pp->pool_short->id);
+ }
+
+ return 0;
+}
+
+/* Update settings of a pool for bigger packets */
+static void mvneta_bm_update_mtu(struct mvneta_port *pp, int mtu)
+{
+ struct mvneta_bm_pool *bm_pool = pp->pool_long;
+ int num;
+
+ /* Release all buffers from long pool */
+ mvneta_bm_bufs_free(pp->bm_priv, bm_pool, 1 << pp->id);
+ if (bm_pool->buf_num) {
+ WARN(1, "cannot free all buffers in pool %d\n",
+ bm_pool->id);
+ goto bm_mtu_err;
+ }
+
+ bm_pool->pkt_size = MVNETA_RX_PKT_SIZE(mtu);
+ bm_pool->buf_size = MVNETA_RX_BUF_SIZE(bm_pool->pkt_size);
+ bm_pool->frag_size = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
+ SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(bm_pool->pkt_size));
+
+ /* Fill entire long pool */
+ num = mvneta_bm_bufs_add(pp->bm_priv, bm_pool, bm_pool->size);
+ if (num != bm_pool->size) {
+ WARN(1, "pool %d: %d of %d allocated\n",
+ bm_pool->id, num, bm_pool->size);
+ goto bm_mtu_err;
+ }
+ mvneta_bm_pool_bufsize_set(pp, bm_pool->buf_size, bm_pool->id);
+
+ return;
+
+bm_mtu_err:
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_long, 1 << pp->id);
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp->id);
+
+ pp->bm_priv = NULL;
+ mvreg_write(pp, MVNETA_ACC_MODE, MVNETA_ACC_MODE_EXT1);
+ netdev_info(pp->dev, "fail to update MTU, fall back to software BM\n");
+}
+
/* Start the Ethernet port RX and TX activity */
static void mvneta_port_up(struct mvneta_port *pp)
{
@@ -1111,9 +1343,17 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
/* Set Port Acceleration Mode */
- val = MVNETA_ACC_MODE_EXT;
+ if (pp->bm_priv)
+ /* HW buffer management + legacy parser */
+ val = MVNETA_ACC_MODE_EXT2;
+ else
+ /* SW buffer management + legacy parser */
+ val = MVNETA_ACC_MODE_EXT1;
mvreg_write(pp, MVNETA_ACC_MODE, val);
+ if (pp->bm_priv)
+ mvreg_write(pp, MVNETA_BM_ADDRESS, pp->bm_priv->bppi_phys_addr);
+
/* Update val of portCfg register accordingly with all RxQueue types */
val = MVNETA_PORT_CONFIG_DEFL_VALUE(pp->rxq_def);
mvreg_write(pp, MVNETA_PORT_CONFIG, val);
@@ -1480,23 +1720,25 @@ static void mvneta_txq_done(struct mvneta_port *pp,
}
}
-static void *mvneta_frag_alloc(const struct mvneta_port *pp)
+void *mvneta_frag_alloc(unsigned int frag_size)
{
- if (likely(pp->frag_size <= PAGE_SIZE))
- return netdev_alloc_frag(pp->frag_size);
+ if (likely(frag_size <= PAGE_SIZE))
+ return netdev_alloc_frag(frag_size);
else
- return kmalloc(pp->frag_size, GFP_ATOMIC);
+ return kmalloc(frag_size, GFP_ATOMIC);
}
+EXPORT_SYMBOL_GPL(mvneta_frag_alloc);
-static void mvneta_frag_free(const struct mvneta_port *pp, void *data)
+void mvneta_frag_free(unsigned int frag_size, void *data)
{
- if (likely(pp->frag_size <= PAGE_SIZE))
+ if (likely(frag_size <= PAGE_SIZE))
skb_free_frag(data);
else
kfree(data);
}
+EXPORT_SYMBOL_GPL(mvneta_frag_free);
-/* Refill processing */
+/* Refill processing for SW buffer management */
static int mvneta_rx_refill(struct mvneta_port *pp,
struct mvneta_rx_desc *rx_desc)
@@ -1504,7 +1746,7 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
dma_addr_t phys_addr;
void *data;
- data = mvneta_frag_alloc(pp);
+ data = mvneta_frag_alloc(pp->frag_size);
if (!data)
return -ENOMEM;
@@ -1512,7 +1754,7 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
MVNETA_RX_BUF_SIZE(pp->pkt_size),
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr))) {
- mvneta_frag_free(pp, data);
+ mvneta_frag_free(pp->frag_size, data);
return -ENOMEM;
}
@@ -1558,22 +1800,156 @@ static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
int rx_done, i;
rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
+ if (rx_done)
+ mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+
+ if (pp->bm_priv) {
+ for (i = 0; i < rx_done; i++) {
+ struct mvneta_rx_desc *rx_desc =
+ mvneta_rxq_next_desc_get(rxq);
+ u8 pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc);
+ struct mvneta_bm_pool *bm_pool;
+
+ bm_pool = &pp->bm_priv->bm_pools[pool_id];
+ /* Return dropped buffer to the pool */
+ mvneta_bm_pool_put_bp(pp->bm_priv, bm_pool,
+ rx_desc->buf_phys_addr);
+ }
+ return;
+ }
+
for (i = 0; i < rxq->size; i++) {
struct mvneta_rx_desc *rx_desc = rxq->descs + i;
void *data = (void *)rx_desc->buf_cookie;
dma_unmap_single(pp->dev->dev.parent, rx_desc->buf_phys_addr,
MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE);
- mvneta_frag_free(pp, data);
+ mvneta_frag_free(pp->frag_size, data);
}
+}
- if (rx_done)
- mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+/* Main rx processing when using software buffer management */
+static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo,
+ struct mvneta_rx_queue *rxq)
+{
+ struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
+ struct net_device *dev = pp->dev;
+ int rx_done;
+ u32 rcvd_pkts = 0;
+ u32 rcvd_bytes = 0;
+
+ /* Get number of received packets */
+ rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
+
+ if (rx_todo > rx_done)
+ rx_todo = rx_done;
+
+ rx_done = 0;
+
+ /* Fairness NAPI loop */
+ while (rx_done < rx_todo) {
+ struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
+ struct sk_buff *skb;
+ unsigned char *data;
+ dma_addr_t phys_addr;
+ u32 rx_status, frag_size;
+ int rx_bytes, err;
+
+ rx_done++;
+ rx_status = rx_desc->status;
+ rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
+ data = (unsigned char *)rx_desc->buf_cookie;
+ phys_addr = rx_desc->buf_phys_addr;
+
+ if (!mvneta_rxq_desc_is_first_last(rx_status) ||
+ (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
+err_drop_frame:
+ dev->stats.rx_errors++;
+ mvneta_rx_error(pp, rx_desc);
+ /* leave the descriptor untouched */
+ continue;
+ }
+
+ if (rx_bytes <= rx_copybreak) {
+ /* better copy a small frame and not unmap the DMA region */
+ skb = netdev_alloc_skb_ip_align(dev, rx_bytes);
+ if (unlikely(!skb))
+ goto err_drop_frame;
+
+ dma_sync_single_range_for_cpu(dev->dev.parent,
+ rx_desc->buf_phys_addr,
+ MVNETA_MH_SIZE + NET_SKB_PAD,
+ rx_bytes,
+ DMA_FROM_DEVICE);
+ memcpy(skb_put(skb, rx_bytes),
+ data + MVNETA_MH_SIZE + NET_SKB_PAD,
+ rx_bytes);
+
+ skb->protocol = eth_type_trans(skb, dev);
+ mvneta_rx_csum(pp, rx_status, skb);
+ napi_gro_receive(&port->napi, skb);
+
+ rcvd_pkts++;
+ rcvd_bytes += rx_bytes;
+
+ /* leave the descriptor and buffer untouched */
+ continue;
+ }
+
+ /* Refill processing */
+ err = mvneta_rx_refill(pp, rx_desc);
+ if (err) {
+ netdev_err(dev, "Linux processing - Can't refill\n");
+ rxq->missed++;
+ goto err_drop_frame;
+ }
+
+ frag_size = pp->frag_size;
+
+ skb = build_skb(data, frag_size > PAGE_SIZE ? 0 : frag_size);
+
+ /* After refill old buffer has to be unmapped regardless
+ * the skb is successfully built or not.
+ */
+ dma_unmap_single(dev->dev.parent, phys_addr,
+ MVNETA_RX_BUF_SIZE(pp->pkt_size),
+ DMA_FROM_DEVICE);
+
+ if (!skb)
+ goto err_drop_frame;
+
+ rcvd_pkts++;
+ rcvd_bytes += rx_bytes;
+
+ /* Linux processing */
+ skb_reserve(skb, MVNETA_MH_SIZE + NET_SKB_PAD);
+ skb_put(skb, rx_bytes);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ mvneta_rx_csum(pp, rx_status, skb);
+
+ napi_gro_receive(&port->napi, skb);
+ }
+
+ if (rcvd_pkts) {
+ struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
+
+ u64_stats_update_begin(&stats->syncp);
+ stats->rx_packets += rcvd_pkts;
+ stats->rx_bytes += rcvd_bytes;
+ u64_stats_update_end(&stats->syncp);
+ }
+
+ /* Update rxq management counters */
+ mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+
+ return rx_done;
}
-/* Main rx processing */
-static int mvneta_rx(struct mvneta_port *pp, int rx_todo,
- struct mvneta_rx_queue *rxq)
+/* Main rx processing when using hardware buffer management */
+static int mvneta_rx_hwbm(struct mvneta_port *pp, int rx_todo,
+ struct mvneta_rx_queue *rxq)
{
struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
struct net_device *dev = pp->dev;
@@ -1592,21 +1968,29 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo,
/* Fairness NAPI loop */
while (rx_done < rx_todo) {
struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
+ struct mvneta_bm_pool *bm_pool = NULL;
struct sk_buff *skb;
unsigned char *data;
dma_addr_t phys_addr;
- u32 rx_status;
+ u32 rx_status, frag_size;
int rx_bytes, err;
+ u8 pool_id;
rx_done++;
rx_status = rx_desc->status;
rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
data = (unsigned char *)rx_desc->buf_cookie;
phys_addr = rx_desc->buf_phys_addr;
+ pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc);
+ bm_pool = &pp->bm_priv->bm_pools[pool_id];
if (!mvneta_rxq_desc_is_first_last(rx_status) ||
(rx_status & MVNETA_RXD_ERR_SUMMARY)) {
- err_drop_frame:
+err_drop_frame_ret_pool:
+ /* Return the buffer to the pool */
+ mvneta_bm_pool_put_bp(pp->bm_priv, bm_pool,
+ rx_desc->buf_phys_addr);
+err_drop_frame:
dev->stats.rx_errors++;
mvneta_rx_error(pp, rx_desc);
/* leave the descriptor untouched */
@@ -1617,7 +2001,7 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo,
/* better copy a small frame and not unmap the DMA region */
skb = netdev_alloc_skb_ip_align(dev, rx_bytes);
if (unlikely(!skb))
- goto err_drop_frame;
+ goto err_drop_frame_ret_pool;
dma_sync_single_range_for_cpu(dev->dev.parent,
rx_desc->buf_phys_addr,
@@ -1635,26 +2019,31 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo,
rcvd_pkts++;
rcvd_bytes += rx_bytes;
+ /* Return the buffer to the pool */
+ mvneta_bm_pool_put_bp(pp->bm_priv, bm_pool,
+ rx_desc->buf_phys_addr);
+
/* leave the descriptor and buffer untouched */
continue;
}
/* Refill processing */
- err = mvneta_rx_refill(pp, rx_desc);
+ err = mvneta_bm_pool_refill(pp->bm_priv, bm_pool);
if (err) {
netdev_err(dev, "Linux processing - Can't refill\n");
rxq->missed++;
- goto err_drop_frame;
+ goto err_drop_frame_ret_pool;
}
- skb = build_skb(data, pp->frag_size > PAGE_SIZE ? 0 : pp->frag_size);
+ frag_size = bm_pool->frag_size;
+
+ skb = build_skb(data, frag_size > PAGE_SIZE ? 0 : frag_size);
/* After refill old buffer has to be unmapped regardless
* the skb is successfully built or not.
*/
- dma_unmap_single(dev->dev.parent, phys_addr,
- MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE);
-
+ dma_unmap_single(&pp->bm_priv->pdev->dev, phys_addr,
+ bm_pool->buf_size, DMA_FROM_DEVICE);
if (!skb)
goto err_drop_frame;
@@ -2259,7 +2648,10 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
if (rx_queue) {
rx_queue = rx_queue - 1;
- rx_done = mvneta_rx(pp, budget, &pp->rxqs[rx_queue]);
+ if (pp->bm_priv)
+ rx_done = mvneta_rx_hwbm(pp, budget, &pp->rxqs[rx_queue]);
+ else
+ rx_done = mvneta_rx_swbm(pp, budget, &pp->rxqs[rx_queue]);
}
budget -= rx_done;
@@ -2348,9 +2740,17 @@ static int mvneta_rxq_init(struct mvneta_port *pp,
mvneta_rx_pkts_coal_set(pp, rxq, rxq->pkts_coal);
mvneta_rx_time_coal_set(pp, rxq, rxq->time_coal);
- /* Fill RXQ with buffers from RX pool */
- mvneta_rxq_buf_size_set(pp, rxq, MVNETA_RX_BUF_SIZE(pp->pkt_size));
- mvneta_rxq_bm_disable(pp, rxq);
+ if (!pp->bm_priv) {
+ /* Fill RXQ with buffers from RX pool */
+ mvneta_rxq_buf_size_set(pp, rxq,
+ MVNETA_RX_BUF_SIZE(pp->pkt_size));
+ mvneta_rxq_bm_disable(pp, rxq);
+ } else {
+ mvneta_rxq_bm_enable(pp, rxq);
+ mvneta_rxq_long_pool_set(pp, rxq);
+ mvneta_rxq_short_pool_set(pp, rxq);
+ }
+
mvneta_rxq_fill(pp, rxq, rxq->size);
return 0;
@@ -2652,6 +3052,9 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
dev->mtu = mtu;
if (!netif_running(dev)) {
+ if (pp->bm_priv)
+ mvneta_bm_update_mtu(pp, mtu);
+
netdev_update_features(dev);
return 0;
}
@@ -2664,6 +3067,9 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
mvneta_cleanup_txqs(pp);
mvneta_cleanup_rxqs(pp);
+ if (pp->bm_priv)
+ mvneta_bm_update_mtu(pp, mtu);
+
pp->pkt_size = MVNETA_RX_PKT_SIZE(dev->mtu);
pp->frag_size = SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(pp->pkt_size)) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
@@ -3539,6 +3945,7 @@ static int mvneta_probe(struct platform_device *pdev)
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
struct device_node *phy_node;
+ struct device_node *bm_node;
struct mvneta_port *pp;
struct net_device *dev;
const char *dt_mac_addr;
@@ -3672,26 +4079,39 @@ static int mvneta_probe(struct platform_device *pdev)
pp->tx_csum_limit = tx_csum_limit;
+ dram_target_info = mv_mbus_dram_info();
+ if (dram_target_info)
+ mvneta_conf_mbus_windows(pp, dram_target_info);
+
pp->tx_ring_size = MVNETA_MAX_TXD;
pp->rx_ring_size = MVNETA_MAX_RXD;
pp->dev = dev;
SET_NETDEV_DEV(dev, &pdev->dev);
+ pp->id = global_port_id++;
+
+ /* Obtain access to BM resources if enabled and already initialized */
+ bm_node = of_parse_phandle(dn, "buffer-manager", 0);
+ if (bm_node && bm_node->data) {
+ pp->bm_priv = bm_node->data;
+ err = mvneta_bm_port_init(pdev, pp);
+ if (err < 0) {
+ dev_info(&pdev->dev, "use SW buffer management\n");
+ pp->bm_priv = NULL;
+ }
+ }
+
err = mvneta_init(&pdev->dev, pp);
if (err < 0)
- goto err_free_stats;
+ goto err_netdev;
err = mvneta_port_power_up(pp, phy_mode);
if (err < 0) {
dev_err(&pdev->dev, "can't power up port\n");
- goto err_free_stats;
+ goto err_netdev;
}
- dram_target_info = mv_mbus_dram_info();
- if (dram_target_info)
- mvneta_conf_mbus_windows(pp, dram_target_info);
-
for_each_present_cpu(cpu) {
struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
@@ -3726,6 +4146,13 @@ static int mvneta_probe(struct platform_device *pdev)
return 0;
+err_netdev:
+ unregister_netdev(dev);
+ if (pp->bm_priv) {
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_long, 1 << pp->id);
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short,
+ 1 << pp->id);
+ }
err_free_stats:
free_percpu(pp->stats);
err_free_ports:
@@ -3757,6 +4184,12 @@ static int mvneta_remove(struct platform_device *pdev)
of_node_put(pp->phy_node);
free_netdev(dev);
+ if (pp->bm_priv) {
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_long, 1 << pp->id);
+ mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short,
+ 1 << pp->id);
+ }
+
return 0;
}
diff --git a/drivers/net/ethernet/marvell/mvneta_bm.c b/drivers/net/ethernet/marvell/mvneta_bm.c
new file mode 100644
index 000000000000..8c968e7d2d8f
--- /dev/null
+++ b/drivers/net/ethernet/marvell/mvneta_bm.c
@@ -0,0 +1,546 @@
+/*
+ * Driver for Marvell NETA network controller Buffer Manager.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Marcin Wojtas <mw@semihalf.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/genalloc.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mbus.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include "mvneta_bm.h"
+
+#define MVNETA_BM_DRIVER_NAME "mvneta_bm"
+#define MVNETA_BM_DRIVER_VERSION "1.0"
+
+static void mvneta_bm_write(struct mvneta_bm *priv, u32 offset, u32 data)
+{
+ writel(data, priv->reg_base + offset);
+}
+
+static u32 mvneta_bm_read(struct mvneta_bm *priv, u32 offset)
+{
+ return readl(priv->reg_base + offset);
+}
+
+static void mvneta_bm_pool_enable(struct mvneta_bm *priv, int pool_id)
+{
+ u32 val;
+
+ val = mvneta_bm_read(priv, MVNETA_BM_POOL_BASE_REG(pool_id));
+ val |= MVNETA_BM_POOL_ENABLE_MASK;
+ mvneta_bm_write(priv, MVNETA_BM_POOL_BASE_REG(pool_id), val);
+
+ /* Clear BM cause register */
+ mvneta_bm_write(priv, MVNETA_BM_INTR_CAUSE_REG, 0);
+}
+
+static void mvneta_bm_pool_disable(struct mvneta_bm *priv, int pool_id)
+{
+ u32 val;
+
+ val = mvneta_bm_read(priv, MVNETA_BM_POOL_BASE_REG(pool_id));
+ val &= ~MVNETA_BM_POOL_ENABLE_MASK;
+ mvneta_bm_write(priv, MVNETA_BM_POOL_BASE_REG(pool_id), val);
+}
+
+static inline void mvneta_bm_config_set(struct mvneta_bm *priv, u32 mask)
+{
+ u32 val;
+
+ val = mvneta_bm_read(priv, MVNETA_BM_CONFIG_REG);
+ val |= mask;
+ mvneta_bm_write(priv, MVNETA_BM_CONFIG_REG, val);
+}
+
+static inline void mvneta_bm_config_clear(struct mvneta_bm *priv, u32 mask)
+{
+ u32 val;
+
+ val = mvneta_bm_read(priv, MVNETA_BM_CONFIG_REG);
+ val &= ~mask;
+ mvneta_bm_write(priv, MVNETA_BM_CONFIG_REG, val);
+}
+
+static void mvneta_bm_pool_target_set(struct mvneta_bm *priv, int pool_id,
+ u8 target_id, u8 attr)
+{
+ u32 val;
+
+ val = mvneta_bm_read(priv, MVNETA_BM_XBAR_POOL_REG(pool_id));
+ val &= ~MVNETA_BM_TARGET_ID_MASK(pool_id);
+ val &= ~MVNETA_BM_XBAR_ATTR_MASK(pool_id);
+ val |= MVNETA_BM_TARGET_ID_VAL(pool_id, target_id);
+ val |= MVNETA_BM_XBAR_ATTR_VAL(pool_id, attr);
+
+ mvneta_bm_write(priv, MVNETA_BM_XBAR_POOL_REG(pool_id), val);
+}
+
+/* Allocate skb for BM pool */
+void *mvneta_buf_alloc(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ dma_addr_t *buf_phys_addr)
+{
+ void *buf;
+ dma_addr_t phys_addr;
+
+ buf = mvneta_frag_alloc(bm_pool->frag_size);
+ if (!buf)
+ return NULL;
+
+ /* In order to update buf_cookie field of RX descriptor properly,
+ * BM hardware expects buf virtual address to be placed in the
+ * first four bytes of mapped buffer.
+ */
+ *(u32 *)buf = (u32)buf;
+ phys_addr = dma_map_single(&priv->pdev->dev, buf, bm_pool->buf_size,
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(&priv->pdev->dev, phys_addr))) {
+ mvneta_frag_free(bm_pool->frag_size, buf);
+ return NULL;
+ }
+ *buf_phys_addr = phys_addr;
+
+ return buf;
+}
+
+/* Refill processing for HW buffer management */
+int mvneta_bm_pool_refill(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool)
+{
+ dma_addr_t buf_phys_addr;
+ void *buf;
+
+ buf = mvneta_buf_alloc(priv, bm_pool, &buf_phys_addr);
+ if (!buf)
+ return -ENOMEM;
+
+ mvneta_bm_pool_put_bp(priv, bm_pool, buf_phys_addr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mvneta_bm_pool_refill);
+
+/* Allocate buffers for the pool */
+int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ int buf_num)
+{
+ int err, i;
+
+ if (bm_pool->buf_num == bm_pool->size) {
+ dev_dbg(&priv->pdev->dev, "pool %d already filled\n",
+ bm_pool->id);
+ return bm_pool->buf_num;
+ }
+
+ if (buf_num < 0 ||
+ (buf_num + bm_pool->buf_num > bm_pool->size)) {
+ dev_err(&priv->pdev->dev,
+ "cannot allocate %d buffers for pool %d\n",
+ buf_num, bm_pool->id);
+ return 0;
+ }
+
+ for (i = 0; i < buf_num; i++) {
+ err = mvneta_bm_pool_refill(priv, bm_pool);
+ if (err < 0)
+ break;
+ }
+
+ /* Update BM driver with number of buffers added to pool */
+ bm_pool->buf_num += i;
+
+ dev_dbg(&priv->pdev->dev,
+ "%s pool %d: pkt_size=%4d, buf_size=%4d, frag_size=%4d\n",
+ bm_pool->type == MVNETA_BM_SHORT ? "short" : "long",
+ bm_pool->id, bm_pool->pkt_size, bm_pool->buf_size,
+ bm_pool->frag_size);
+
+ dev_dbg(&priv->pdev->dev,
+ "%s pool %d: %d of %d buffers added\n",
+ bm_pool->type == MVNETA_BM_SHORT ? "short" : "long",
+ bm_pool->id, i, buf_num);
+
+ return i;
+}
+EXPORT_SYMBOL_GPL(mvneta_bm_bufs_add);
+
+/* Create pool */
+static int mvneta_bm_pool_create(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool)
+{
+ struct platform_device *pdev = priv->pdev;
+ u8 target_id, attr;
+ int size_bytes, err;
+
+ size_bytes = sizeof(u32) * bm_pool->size;
+ bm_pool->virt_addr = dma_alloc_coherent(&pdev->dev, size_bytes,
+ &bm_pool->phys_addr,
+ GFP_KERNEL);
+ if (!bm_pool->virt_addr)
+ return -ENOMEM;
+
+ if (!IS_ALIGNED((u32)bm_pool->virt_addr, MVNETA_BM_POOL_PTR_ALIGN)) {
+ dma_free_coherent(&pdev->dev, size_bytes, bm_pool->virt_addr,
+ bm_pool->phys_addr);
+ dev_err(&pdev->dev, "BM pool %d is not %d bytes aligned\n",
+ bm_pool->id, MVNETA_BM_POOL_PTR_ALIGN);
+ return -ENOMEM;
+ }
+
+ err = mvebu_mbus_get_dram_win_info(bm_pool->phys_addr, &target_id,
+ &attr);
+ if (err < 0) {
+ dma_free_coherent(&pdev->dev, size_bytes, bm_pool->virt_addr,
+ bm_pool->phys_addr);
+ return err;
+ }
+
+ /* Set pool address */
+ mvneta_bm_write(priv, MVNETA_BM_POOL_BASE_REG(bm_pool->id),
+ bm_pool->phys_addr);
+
+ mvneta_bm_pool_target_set(priv, bm_pool->id, target_id, attr);
+ mvneta_bm_pool_enable(priv, bm_pool->id);
+
+ return 0;
+}
+
+/* Notify the driver that BM pool is being used as specific type and return the
+ * pool pointer on success
+ */
+struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
+ enum mvneta_bm_type type, u8 port_id,
+ int pkt_size)
+{
+ struct mvneta_bm_pool *new_pool = &priv->bm_pools[pool_id];
+ int num, err;
+
+ if (new_pool->type == MVNETA_BM_LONG &&
+ new_pool->port_map != 1 << port_id) {
+ dev_err(&priv->pdev->dev,
+ "long pool cannot be shared by the ports\n");
+ return NULL;
+ }
+
+ if (new_pool->type == MVNETA_BM_SHORT && new_pool->type != type) {
+ dev_err(&priv->pdev->dev,
+ "mixing pools' types between the ports is forbidden\n");
+ return NULL;
+ }
+
+ if (new_pool->pkt_size == 0 || type != MVNETA_BM_SHORT)
+ new_pool->pkt_size = pkt_size;
+
+ /* Allocate buffers in case BM pool hasn't been used yet */
+ if (new_pool->type == MVNETA_BM_FREE) {
+ new_pool->type = type;
+ new_pool->buf_size = MVNETA_RX_BUF_SIZE(new_pool->pkt_size);
+ new_pool->frag_size =
+ SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(new_pool->pkt_size)) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
+ /* Create new pool */
+ err = mvneta_bm_pool_create(priv, new_pool);
+ if (err) {
+ dev_err(&priv->pdev->dev, "fail to create pool %d\n",
+ new_pool->id);
+ return NULL;
+ }
+
+ /* Allocate buffers for this pool */
+ num = mvneta_bm_bufs_add(priv, new_pool, new_pool->size);
+ if (num != new_pool->size) {
+ WARN(1, "pool %d: %d of %d allocated\n",
+ new_pool->id, num, new_pool->size);
+ return NULL;
+ }
+ }
+
+ return new_pool;
+}
+EXPORT_SYMBOL_GPL(mvneta_bm_pool_use);
+
+/* Free all buffers from the pool */
+void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ u8 port_map)
+{
+ int i;
+
+ bm_pool->port_map &= ~port_map;
+ if (bm_pool->port_map)
+ return;
+
+ mvneta_bm_config_set(priv, MVNETA_BM_EMPTY_LIMIT_MASK);
+
+ for (i = 0; i < bm_pool->buf_num; i++) {
+ dma_addr_t buf_phys_addr;
+ u32 *vaddr;
+
+ /* Get buffer physical address (indirect access) */
+ buf_phys_addr = mvneta_bm_pool_get_bp(priv, bm_pool);
+
+ /* Work-around to the problems when destroying the pool,
+ * when it occurs that a read access to BPPI returns 0.
+ */
+ if (buf_phys_addr == 0)
+ continue;
+
+ vaddr = phys_to_virt(buf_phys_addr);
+ if (!vaddr)
+ break;
+
+ dma_unmap_single(&priv->pdev->dev, buf_phys_addr,
+ bm_pool->buf_size, DMA_FROM_DEVICE);
+ mvneta_frag_free(bm_pool->frag_size, vaddr);
+ }
+
+ mvneta_bm_config_clear(priv, MVNETA_BM_EMPTY_LIMIT_MASK);
+
+ /* Update BM driver with number of buffers removed from pool */
+ bm_pool->buf_num -= i;
+}
+EXPORT_SYMBOL_GPL(mvneta_bm_bufs_free);
+
+/* Cleanup pool */
+void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool, u8 port_map)
+{
+ bm_pool->port_map &= ~port_map;
+ if (bm_pool->port_map)
+ return;
+
+ bm_pool->type = MVNETA_BM_FREE;
+
+ mvneta_bm_bufs_free(priv, bm_pool, port_map);
+ if (bm_pool->buf_num)
+ WARN(1, "cannot free all buffers in pool %d\n", bm_pool->id);
+
+ if (bm_pool->virt_addr) {
+ dma_free_coherent(&priv->pdev->dev, sizeof(u32) * bm_pool->size,
+ bm_pool->virt_addr, bm_pool->phys_addr);
+ bm_pool->virt_addr = NULL;
+ }
+
+ mvneta_bm_pool_disable(priv, bm_pool->id);
+}
+EXPORT_SYMBOL_GPL(mvneta_bm_pool_destroy);
+
+static void mvneta_bm_pools_init(struct mvneta_bm *priv)
+{
+ struct device_node *dn = priv->pdev->dev.of_node;
+ struct mvneta_bm_pool *bm_pool;
+ char prop[15];
+ u32 size;
+ int i;
+
+ /* Activate BM unit */
+ mvneta_bm_write(priv, MVNETA_BM_COMMAND_REG, MVNETA_BM_START_MASK);
+
+ /* Create all pools with maximum size */
+ for (i = 0; i < MVNETA_BM_POOLS_NUM; i++) {
+ bm_pool = &priv->bm_pools[i];
+ bm_pool->id = i;
+ bm_pool->type = MVNETA_BM_FREE;
+
+ /* Reset read pointer */
+ mvneta_bm_write(priv, MVNETA_BM_POOL_READ_PTR_REG(i), 0);
+
+ /* Reset write pointer */
+ mvneta_bm_write(priv, MVNETA_BM_POOL_WRITE_PTR_REG(i), 0);
+
+ /* Configure pool size according to DT or use default value */
+ sprintf(prop, "pool%d,capacity", i);
+ if (of_property_read_u32(dn, prop, &size)) {
+ size = MVNETA_BM_POOL_CAP_DEF;
+ } else if (size > MVNETA_BM_POOL_CAP_MAX) {
+ dev_warn(&priv->pdev->dev,
+ "Illegal pool %d capacity %d, set to %d\n",
+ i, size, MVNETA_BM_POOL_CAP_MAX);
+ size = MVNETA_BM_POOL_CAP_MAX;
+ } else if (size < MVNETA_BM_POOL_CAP_MIN) {
+ dev_warn(&priv->pdev->dev,
+ "Illegal pool %d capacity %d, set to %d\n",
+ i, size, MVNETA_BM_POOL_CAP_MIN);
+ size = MVNETA_BM_POOL_CAP_MIN;
+ } else if (!IS_ALIGNED(size, MVNETA_BM_POOL_CAP_ALIGN)) {
+ dev_warn(&priv->pdev->dev,
+ "Illegal pool %d capacity %d, round to %d\n",
+ i, size, ALIGN(size,
+ MVNETA_BM_POOL_CAP_ALIGN));
+ size = ALIGN(size, MVNETA_BM_POOL_CAP_ALIGN);
+ }
+ bm_pool->size = size;
+
+ mvneta_bm_write(priv, MVNETA_BM_POOL_SIZE_REG(i),
+ bm_pool->size);
+
+ /* Obtain custom pkt_size from DT */
+ sprintf(prop, "pool%d,pkt-size", i);
+ if (of_property_read_u32(dn, prop, &bm_pool->pkt_size))
+ bm_pool->pkt_size = 0;
+ }
+}
+
+static void mvneta_bm_default_set(struct mvneta_bm *priv)
+{
+ u32 val;
+
+ /* Mask BM all interrupts */
+ mvneta_bm_write(priv, MVNETA_BM_INTR_MASK_REG, 0);
+
+ /* Clear BM cause register */
+ mvneta_bm_write(priv, MVNETA_BM_INTR_CAUSE_REG, 0);
+
+ /* Set BM configuration register */
+ val = mvneta_bm_read(priv, MVNETA_BM_CONFIG_REG);
+
+ /* Reduce MaxInBurstSize from 32 BPs to 16 BPs */
+ val &= ~MVNETA_BM_MAX_IN_BURST_SIZE_MASK;
+ val |= MVNETA_BM_MAX_IN_BURST_SIZE_16BP;
+ mvneta_bm_write(priv, MVNETA_BM_CONFIG_REG, val);
+}
+
+static int mvneta_bm_init(struct mvneta_bm *priv)
+{
+ mvneta_bm_default_set(priv);
+
+ /* Allocate and initialize BM pools structures */
+ priv->bm_pools = devm_kcalloc(&priv->pdev->dev, MVNETA_BM_POOLS_NUM,
+ sizeof(struct mvneta_bm_pool),
+ GFP_KERNEL);
+ if (!priv->bm_pools)
+ return -ENOMEM;
+
+ mvneta_bm_pools_init(priv);
+
+ return 0;
+}
+
+static int mvneta_bm_get_sram(struct device_node *dn,
+ struct mvneta_bm *priv)
+{
+ priv->bppi_pool = of_gen_pool_get(dn, "internal-mem", 0);
+ if (!priv->bppi_pool)
+ return -ENOMEM;
+
+ priv->bppi_virt_addr = gen_pool_dma_alloc(priv->bppi_pool,
+ MVNETA_BM_BPPI_SIZE,
+ &priv->bppi_phys_addr);
+ if (!priv->bppi_virt_addr)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void mvneta_bm_put_sram(struct mvneta_bm *priv)
+{
+ gen_pool_free(priv->bppi_pool, priv->bppi_phys_addr,
+ MVNETA_BM_BPPI_SIZE);
+}
+
+static int mvneta_bm_probe(struct platform_device *pdev)
+{
+ struct device_node *dn = pdev->dev.of_node;
+ struct mvneta_bm *priv;
+ struct resource *res;
+ int err;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct mvneta_bm), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->reg_base))
+ return PTR_ERR(priv->reg_base);
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+ err = clk_prepare_enable(priv->clk);
+ if (err < 0)
+ return err;
+
+ err = mvneta_bm_get_sram(dn, priv);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to allocate internal memory\n");
+ goto err_clk;
+ }
+
+ priv->pdev = pdev;
+
+ /* Initialize buffer manager internals */
+ err = mvneta_bm_init(priv);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to initialize controller\n");
+ goto err_sram;
+ }
+
+ dn->data = priv;
+ platform_set_drvdata(pdev, priv);
+
+ dev_info(&pdev->dev, "Buffer Manager for network controller enabled\n");
+
+ return 0;
+
+err_sram:
+ mvneta_bm_put_sram(priv);
+err_clk:
+ clk_disable_unprepare(priv->clk);
+ return err;
+}
+
+static int mvneta_bm_remove(struct platform_device *pdev)
+{
+ struct mvneta_bm *priv = platform_get_drvdata(pdev);
+ u8 all_ports_map = 0xff;
+ int i = 0;
+
+ for (i = 0; i < MVNETA_BM_POOLS_NUM; i++) {
+ struct mvneta_bm_pool *bm_pool = &priv->bm_pools[i];
+
+ mvneta_bm_pool_destroy(priv, bm_pool, all_ports_map);
+ }
+
+ mvneta_bm_put_sram(priv);
+
+ /* Dectivate BM unit */
+ mvneta_bm_write(priv, MVNETA_BM_COMMAND_REG, MVNETA_BM_STOP_MASK);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id mvneta_bm_match[] = {
+ { .compatible = "marvell,armada-380-neta-bm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mvneta_bm_match);
+
+static struct platform_driver mvneta_bm_driver = {
+ .probe = mvneta_bm_probe,
+ .remove = mvneta_bm_remove,
+ .driver = {
+ .name = MVNETA_BM_DRIVER_NAME,
+ .of_match_table = mvneta_bm_match,
+ },
+};
+
+module_platform_driver(mvneta_bm_driver);
+
+MODULE_DESCRIPTION("Marvell NETA Buffer Manager Driver - www.marvell.com");
+MODULE_AUTHOR("Marcin Wojtas <mw@semihalf.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/marvell/mvneta_bm.h b/drivers/net/ethernet/marvell/mvneta_bm.h
new file mode 100644
index 000000000000..db239e061ab0
--- /dev/null
+++ b/drivers/net/ethernet/marvell/mvneta_bm.h
@@ -0,0 +1,189 @@
+/*
+ * Driver for Marvell NETA network controller Buffer Manager.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Marcin Wojtas <mw@semihalf.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _MVNETA_BM_H_
+#define _MVNETA_BM_H_
+
+/* BM Configuration Register */
+#define MVNETA_BM_CONFIG_REG 0x0
+#define MVNETA_BM_STATUS_MASK 0x30
+#define MVNETA_BM_ACTIVE_MASK BIT(4)
+#define MVNETA_BM_MAX_IN_BURST_SIZE_MASK 0x60000
+#define MVNETA_BM_MAX_IN_BURST_SIZE_16BP BIT(18)
+#define MVNETA_BM_EMPTY_LIMIT_MASK BIT(19)
+
+/* BM Activation Register */
+#define MVNETA_BM_COMMAND_REG 0x4
+#define MVNETA_BM_START_MASK BIT(0)
+#define MVNETA_BM_STOP_MASK BIT(1)
+#define MVNETA_BM_PAUSE_MASK BIT(2)
+
+/* BM Xbar interface Register */
+#define MVNETA_BM_XBAR_01_REG 0x8
+#define MVNETA_BM_XBAR_23_REG 0xc
+#define MVNETA_BM_XBAR_POOL_REG(pool) \
+ (((pool) < 2) ? MVNETA_BM_XBAR_01_REG : MVNETA_BM_XBAR_23_REG)
+#define MVNETA_BM_TARGET_ID_OFFS(pool) (((pool) & 1) ? 16 : 0)
+#define MVNETA_BM_TARGET_ID_MASK(pool) \
+ (0xf << MVNETA_BM_TARGET_ID_OFFS(pool))
+#define MVNETA_BM_TARGET_ID_VAL(pool, id) \
+ ((id) << MVNETA_BM_TARGET_ID_OFFS(pool))
+#define MVNETA_BM_XBAR_ATTR_OFFS(pool) (((pool) & 1) ? 20 : 4)
+#define MVNETA_BM_XBAR_ATTR_MASK(pool) \
+ (0xff << MVNETA_BM_XBAR_ATTR_OFFS(pool))
+#define MVNETA_BM_XBAR_ATTR_VAL(pool, attr) \
+ ((attr) << MVNETA_BM_XBAR_ATTR_OFFS(pool))
+
+/* Address of External Buffer Pointers Pool Register */
+#define MVNETA_BM_POOL_BASE_REG(pool) (0x10 + ((pool) << 4))
+#define MVNETA_BM_POOL_ENABLE_MASK BIT(0)
+
+/* External Buffer Pointers Pool RD pointer Register */
+#define MVNETA_BM_POOL_READ_PTR_REG(pool) (0x14 + ((pool) << 4))
+#define MVNETA_BM_POOL_SET_READ_PTR_MASK 0xfffc
+#define MVNETA_BM_POOL_GET_READ_PTR_OFFS 16
+#define MVNETA_BM_POOL_GET_READ_PTR_MASK 0xfffc0000
+
+/* External Buffer Pointers Pool WR pointer */
+#define MVNETA_BM_POOL_WRITE_PTR_REG(pool) (0x18 + ((pool) << 4))
+#define MVNETA_BM_POOL_SET_WRITE_PTR_OFFS 0
+#define MVNETA_BM_POOL_SET_WRITE_PTR_MASK 0xfffc
+#define MVNETA_BM_POOL_GET_WRITE_PTR_OFFS 16
+#define MVNETA_BM_POOL_GET_WRITE_PTR_MASK 0xfffc0000
+
+/* External Buffer Pointers Pool Size Register */
+#define MVNETA_BM_POOL_SIZE_REG(pool) (0x1c + ((pool) << 4))
+#define MVNETA_BM_POOL_SIZE_MASK 0x3fff
+
+/* BM Interrupt Cause Register */
+#define MVNETA_BM_INTR_CAUSE_REG (0x50)
+
+/* BM interrupt Mask Register */
+#define MVNETA_BM_INTR_MASK_REG (0x54)
+
+/* Other definitions */
+#define MVNETA_BM_SHORT_PKT_SIZE 256
+#define MVNETA_BM_POOLS_NUM 4
+#define MVNETA_BM_POOL_CAP_MIN 128
+#define MVNETA_BM_POOL_CAP_DEF 2048
+#define MVNETA_BM_POOL_CAP_MAX \
+ (16 * 1024 - MVNETA_BM_POOL_CAP_ALIGN)
+#define MVNETA_BM_POOL_CAP_ALIGN 32
+#define MVNETA_BM_POOL_PTR_ALIGN 32
+
+#define MVNETA_BM_POOL_ACCESS_OFFS 8
+
+#define MVNETA_BM_BPPI_SIZE 0x100000
+
+#define MVNETA_RX_BUF_SIZE(pkt_size) ((pkt_size) + NET_SKB_PAD)
+
+enum mvneta_bm_type {
+ MVNETA_BM_FREE,
+ MVNETA_BM_LONG,
+ MVNETA_BM_SHORT
+};
+
+struct mvneta_bm {
+ void __iomem *reg_base;
+ struct clk *clk;
+ struct platform_device *pdev;
+
+ struct gen_pool *bppi_pool;
+ /* BPPI virtual base address */
+ void __iomem *bppi_virt_addr;
+ /* BPPI physical base address */
+ dma_addr_t bppi_phys_addr;
+
+ /* BM pools */
+ struct mvneta_bm_pool *bm_pools;
+};
+
+struct mvneta_bm_pool {
+ /* Pool number in the range 0-3 */
+ u8 id;
+ enum mvneta_bm_type type;
+
+ /* Buffer Pointers Pool External (BPPE) size in number of bytes */
+ int size;
+ /* Number of buffers used by this pool */
+ int buf_num;
+ /* Pool buffer size */
+ int buf_size;
+ /* Packet size */
+ int pkt_size;
+ /* Single frag size */
+ u32 frag_size;
+
+ /* BPPE virtual base address */
+ u32 *virt_addr;
+ /* BPPE physical base address */
+ dma_addr_t phys_addr;
+
+ /* Ports using BM pool */
+ u8 port_map;
+
+ struct mvneta_bm *priv;
+};
+
+/* Declarations and definitions */
+void *mvneta_frag_alloc(unsigned int frag_size);
+void mvneta_frag_free(unsigned int frag_size, void *data);
+
+#if defined(CONFIG_MVNETA_BM) || defined(CONFIG_MVNETA_BM_MODULE)
+void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool, u8 port_map);
+void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ u8 port_map);
+int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ int buf_num);
+int mvneta_bm_pool_refill(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool);
+struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
+ enum mvneta_bm_type type, u8 port_id,
+ int pkt_size);
+
+static inline void mvneta_bm_pool_put_bp(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool,
+ dma_addr_t buf_phys_addr)
+{
+ writel_relaxed(buf_phys_addr, priv->bppi_virt_addr +
+ (bm_pool->id << MVNETA_BM_POOL_ACCESS_OFFS));
+}
+
+static inline u32 mvneta_bm_pool_get_bp(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool)
+{
+ return readl_relaxed(priv->bppi_virt_addr +
+ (bm_pool->id << MVNETA_BM_POOL_ACCESS_OFFS));
+}
+#else
+void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool, u8 port_map) {}
+void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ u8 port_map) {}
+int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+ int buf_num) { return 0; }
+int mvneta_bm_pool_refill(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool) {return 0; }
+struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
+ enum mvneta_bm_type type, u8 port_id,
+ int pkt_size) { return NULL; }
+
+static inline void mvneta_bm_pool_put_bp(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool,
+ dma_addr_t buf_phys_addr) {}
+
+static inline u32 mvneta_bm_pool_get_bp(struct mvneta_bm *priv,
+ struct mvneta_bm_pool *bm_pool)
+{ return 0; }
+#endif /* CONFIG_MVNETA_BM */
+#endif
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 09/10] net: add a hardware buffer management helper API
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (7 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 08/10] net: mvneta: bm: add support for hardware buffer management Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 10/10] net: mvneta: Use the new hwbm framework Gregory CLEMENT
2016-03-14 2:02 ` [PATCH v5 net-next 00/10] API set for HW Buffer management David Miller
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
This basic implementation allows to share code between driver using
hardware buffer management. As the code is hardware agnostic, there is
few helpers, most of the optimization brought by the an HW BM has to be
done at driver level.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
include/net/hwbm.h | 28 ++++++++++++++++++
net/Kconfig | 3 ++
net/core/Makefile | 1 +
net/core/hwbm.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 119 insertions(+)
create mode 100644 include/net/hwbm.h
create mode 100644 net/core/hwbm.c
diff --git a/include/net/hwbm.h b/include/net/hwbm.h
new file mode 100644
index 000000000000..47d08662501b
--- /dev/null
+++ b/include/net/hwbm.h
@@ -0,0 +1,28 @@
+#ifndef _HWBM_H
+#define _HWBM_H
+
+struct hwbm_pool {
+ /* Capacity of the pool */
+ int size;
+ /* Size of the buffers managed */
+ int frag_size;
+ /* Number of buffers currently used by this pool */
+ int buf_num;
+ /* constructor called during alocation */
+ int (*construct)(struct hwbm_pool *bm_pool, void *buf);
+ /* protect acces to the buffer counter*/
+ spinlock_t lock;
+ /* private data */
+ void *priv;
+};
+#ifdef CONFIG_HWBM
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf);
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp);
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp);
+#else
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf) {}
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp) { return 0; }
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp)
+{ return 0; }
+#endif /* CONFIG_HWBM */
+#endif /* _HWBM_H */
diff --git a/net/Kconfig b/net/Kconfig
index 174354618f8a..f50c8af4308b 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -253,6 +253,9 @@ config XPS
depends on SMP
default y
+config HWBM
+ bool
+
config SOCK_CGROUP_DATA
bool
default n
diff --git a/net/core/Makefile b/net/core/Makefile
index 0b835de04de3..57e6dd81c6be 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_NET_PTP_CLASSIFY) += ptp_classifier.o
obj-$(CONFIG_CGROUP_NET_PRIO) += netprio_cgroup.o
obj-$(CONFIG_CGROUP_NET_CLASSID) += netclassid_cgroup.o
obj-$(CONFIG_LWTUNNEL) += lwtunnel.o
+obj-$(CONFIG_HWBM) += hwbm.o
diff --git a/net/core/hwbm.c b/net/core/hwbm.c
new file mode 100644
index 000000000000..941c28486896
--- /dev/null
+++ b/net/core/hwbm.c
@@ -0,0 +1,87 @@
+/* Support for hardware buffer manager.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/skbuff.h>
+#include <net/hwbm.h>
+
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf)
+{
+ if (likely(bm_pool->frag_size <= PAGE_SIZE))
+ skb_free_frag(buf);
+ else
+ kfree(buf);
+}
+EXPORT_SYMBOL_GPL(hwbm_buf_free);
+
+/* Refill processing for HW buffer management */
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp)
+{
+ int frag_size = bm_pool->frag_size;
+ void *buf;
+
+ if (likely(frag_size <= PAGE_SIZE))
+ buf = netdev_alloc_frag(frag_size);
+ else
+ buf = kmalloc(frag_size, gfp);
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (bm_pool->construct)
+ if (bm_pool->construct(bm_pool, buf)) {
+ hwbm_buf_free(bm_pool, buf);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hwbm_pool_refill);
+
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp)
+{
+ int err, i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bm_pool->lock, flags);
+ if (bm_pool->buf_num == bm_pool->size) {
+ pr_warn("pool already filled\n");
+ return bm_pool->buf_num;
+ }
+
+ if (buf_num + bm_pool->buf_num > bm_pool->size) {
+ pr_warn("cannot allocate %d buffers for pool\n",
+ buf_num);
+ return 0;
+ }
+
+ if ((buf_num + bm_pool->buf_num) < bm_pool->buf_num) {
+ pr_warn("Adding %d buffers to the %d current buffers will overflow\n",
+ buf_num, bm_pool->buf_num);
+ return 0;
+ }
+
+ for (i = 0; i < buf_num; i++) {
+ err = hwbm_pool_refill(bm_pool, gfp);
+ if (err < 0)
+ break;
+ }
+
+ /* Update BM driver with number of buffers added to pool */
+ bm_pool->buf_num += i;
+
+ pr_debug("hwpm pool: %d of %d buffers added\n", i, buf_num);
+ spin_unlock_irqrestore(&bm_pool->lock, flags);
+
+ return i;
+}
+EXPORT_SYMBOL_GPL(hwbm_pool_add);
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 net-next 10/10] net: mvneta: Use the new hwbm framework
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (8 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 09/10] net: add a hardware buffer management helper API Gregory CLEMENT
@ 2016-03-10 10:09 ` Gregory CLEMENT
2016-03-14 2:02 ` [PATCH v5 net-next 00/10] API set for HW Buffer management David Miller
10 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2016-03-10 10:09 UTC (permalink / raw)
To: David S. Miller, linux-kernel, netdev, Thomas Petazzoni,
Florian Fainelli
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Gregory CLEMENT, linux-arm-kernel, Lior Amsalem, Nadav Haklai,
Marcin Wojtas, Simon Guinot, Russell King - ARM Linux,
Willy Tarreau, Timor Kardashov, Dmitri Epshtein,
Sebastian Careba
Now that the hardware buffer management framework had been introduced,
let's use it.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
drivers/net/ethernet/marvell/Kconfig | 1 +
drivers/net/ethernet/marvell/mvneta.c | 18 +++--
drivers/net/ethernet/marvell/mvneta_bm.c | 125 ++++++++-----------------------
drivers/net/ethernet/marvell/mvneta_bm.h | 17 ++---
4 files changed, 49 insertions(+), 112 deletions(-)
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index ac6605c62f46..62d80fddbe34 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -43,6 +43,7 @@ config MVMDIO
config MVNETA_BM
tristate "Marvell Armada 38x/XP network interface BM support"
depends on MVNETA
+ select HWBM
---help---
This driver supports auxiliary block of the network
interface units in the Marvell ARMADA XP and ARMADA 38x SoC
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index ade5b0b961d3..daf94a82c9f5 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -30,6 +30,7 @@
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/skbuff.h>
+#include <net/hwbm.h>
#include "mvneta_bm.h"
#include <net/ip.h>
#include <net/ipv6.h>
@@ -1021,11 +1022,12 @@ static int mvneta_bm_port_init(struct platform_device *pdev,
static void mvneta_bm_update_mtu(struct mvneta_port *pp, int mtu)
{
struct mvneta_bm_pool *bm_pool = pp->pool_long;
+ struct hwbm_pool *hwbm_pool = &bm_pool->hwbm_pool;
int num;
/* Release all buffers from long pool */
mvneta_bm_bufs_free(pp->bm_priv, bm_pool, 1 << pp->id);
- if (bm_pool->buf_num) {
+ if (hwbm_pool->buf_num) {
WARN(1, "cannot free all buffers in pool %d\n",
bm_pool->id);
goto bm_mtu_err;
@@ -1033,14 +1035,14 @@ static void mvneta_bm_update_mtu(struct mvneta_port *pp, int mtu)
bm_pool->pkt_size = MVNETA_RX_PKT_SIZE(mtu);
bm_pool->buf_size = MVNETA_RX_BUF_SIZE(bm_pool->pkt_size);
- bm_pool->frag_size = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
- SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(bm_pool->pkt_size));
+ hwbm_pool->frag_size = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
+ SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(bm_pool->pkt_size));
/* Fill entire long pool */
- num = mvneta_bm_bufs_add(pp->bm_priv, bm_pool, bm_pool->size);
- if (num != bm_pool->size) {
+ num = hwbm_pool_add(hwbm_pool, hwbm_pool->size, GFP_ATOMIC);
+ if (num != hwbm_pool->size) {
WARN(1, "pool %d: %d of %d allocated\n",
- bm_pool->id, num, bm_pool->size);
+ bm_pool->id, num, hwbm_pool->size);
goto bm_mtu_err;
}
mvneta_bm_pool_bufsize_set(pp, bm_pool->buf_size, bm_pool->id);
@@ -2028,14 +2030,14 @@ err_drop_frame:
}
/* Refill processing */
- err = mvneta_bm_pool_refill(pp->bm_priv, bm_pool);
+ err = hwbm_pool_refill(&bm_pool->hwbm_pool, GFP_ATOMIC);
if (err) {
netdev_err(dev, "Linux processing - Can't refill\n");
rxq->missed++;
goto err_drop_frame_ret_pool;
}
- frag_size = bm_pool->frag_size;
+ frag_size = bm_pool->hwbm_pool.frag_size;
skb = build_skb(data, frag_size > PAGE_SIZE ? 0 : frag_size);
diff --git a/drivers/net/ethernet/marvell/mvneta_bm.c b/drivers/net/ethernet/marvell/mvneta_bm.c
index 8c968e7d2d8f..01fccec632ec 100644
--- a/drivers/net/ethernet/marvell/mvneta_bm.c
+++ b/drivers/net/ethernet/marvell/mvneta_bm.c
@@ -10,16 +10,17 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/genalloc.h>
-#include <linux/platform_device.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/mbus.h>
#include <linux/module.h>
-#include <linux/io.h>
+#include <linux/netdevice.h>
#include <linux/of.h>
-#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <net/hwbm.h>
#include "mvneta_bm.h"
#define MVNETA_BM_DRIVER_NAME "mvneta_bm"
@@ -88,17 +89,13 @@ static void mvneta_bm_pool_target_set(struct mvneta_bm *priv, int pool_id,
mvneta_bm_write(priv, MVNETA_BM_XBAR_POOL_REG(pool_id), val);
}
-/* Allocate skb for BM pool */
-void *mvneta_buf_alloc(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- dma_addr_t *buf_phys_addr)
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf)
{
- void *buf;
+ struct mvneta_bm_pool *bm_pool =
+ (struct mvneta_bm_pool *)hwbm_pool->priv;
+ struct mvneta_bm *priv = bm_pool->priv;
dma_addr_t phys_addr;
- buf = mvneta_frag_alloc(bm_pool->frag_size);
- if (!buf)
- return NULL;
-
/* In order to update buf_cookie field of RX descriptor properly,
* BM hardware expects buf virtual address to be placed in the
* first four bytes of mapped buffer.
@@ -106,75 +103,13 @@ void *mvneta_buf_alloc(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
*(u32 *)buf = (u32)buf;
phys_addr = dma_map_single(&priv->pdev->dev, buf, bm_pool->buf_size,
DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(&priv->pdev->dev, phys_addr))) {
- mvneta_frag_free(bm_pool->frag_size, buf);
- return NULL;
- }
- *buf_phys_addr = phys_addr;
-
- return buf;
-}
-
-/* Refill processing for HW buffer management */
-int mvneta_bm_pool_refill(struct mvneta_bm *priv,
- struct mvneta_bm_pool *bm_pool)
-{
- dma_addr_t buf_phys_addr;
- void *buf;
-
- buf = mvneta_buf_alloc(priv, bm_pool, &buf_phys_addr);
- if (!buf)
+ if (unlikely(dma_mapping_error(&priv->pdev->dev, phys_addr)))
return -ENOMEM;
- mvneta_bm_pool_put_bp(priv, bm_pool, buf_phys_addr);
-
+ mvneta_bm_pool_put_bp(priv, bm_pool, phys_addr);
return 0;
}
-EXPORT_SYMBOL_GPL(mvneta_bm_pool_refill);
-
-/* Allocate buffers for the pool */
-int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- int buf_num)
-{
- int err, i;
-
- if (bm_pool->buf_num == bm_pool->size) {
- dev_dbg(&priv->pdev->dev, "pool %d already filled\n",
- bm_pool->id);
- return bm_pool->buf_num;
- }
-
- if (buf_num < 0 ||
- (buf_num + bm_pool->buf_num > bm_pool->size)) {
- dev_err(&priv->pdev->dev,
- "cannot allocate %d buffers for pool %d\n",
- buf_num, bm_pool->id);
- return 0;
- }
-
- for (i = 0; i < buf_num; i++) {
- err = mvneta_bm_pool_refill(priv, bm_pool);
- if (err < 0)
- break;
- }
-
- /* Update BM driver with number of buffers added to pool */
- bm_pool->buf_num += i;
-
- dev_dbg(&priv->pdev->dev,
- "%s pool %d: pkt_size=%4d, buf_size=%4d, frag_size=%4d\n",
- bm_pool->type == MVNETA_BM_SHORT ? "short" : "long",
- bm_pool->id, bm_pool->pkt_size, bm_pool->buf_size,
- bm_pool->frag_size);
-
- dev_dbg(&priv->pdev->dev,
- "%s pool %d: %d of %d buffers added\n",
- bm_pool->type == MVNETA_BM_SHORT ? "short" : "long",
- bm_pool->id, i, buf_num);
-
- return i;
-}
-EXPORT_SYMBOL_GPL(mvneta_bm_bufs_add);
+EXPORT_SYMBOL_GPL(mvneta_bm_construct);
/* Create pool */
static int mvneta_bm_pool_create(struct mvneta_bm *priv,
@@ -183,8 +118,7 @@ static int mvneta_bm_pool_create(struct mvneta_bm *priv,
struct platform_device *pdev = priv->pdev;
u8 target_id, attr;
int size_bytes, err;
-
- size_bytes = sizeof(u32) * bm_pool->size;
+ size_bytes = sizeof(u32) * bm_pool->hwbm_pool.size;
bm_pool->virt_addr = dma_alloc_coherent(&pdev->dev, size_bytes,
&bm_pool->phys_addr,
GFP_KERNEL);
@@ -245,11 +179,16 @@ struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
/* Allocate buffers in case BM pool hasn't been used yet */
if (new_pool->type == MVNETA_BM_FREE) {
+ struct hwbm_pool *hwbm_pool = &new_pool->hwbm_pool;
+
+ new_pool->priv = priv;
new_pool->type = type;
new_pool->buf_size = MVNETA_RX_BUF_SIZE(new_pool->pkt_size);
- new_pool->frag_size =
+ hwbm_pool->frag_size =
SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(new_pool->pkt_size)) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ hwbm_pool->construct = mvneta_bm_construct;
+ hwbm_pool->priv = new_pool;
/* Create new pool */
err = mvneta_bm_pool_create(priv, new_pool);
@@ -260,10 +199,10 @@ struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
}
/* Allocate buffers for this pool */
- num = mvneta_bm_bufs_add(priv, new_pool, new_pool->size);
- if (num != new_pool->size) {
+ num = hwbm_pool_add(hwbm_pool, hwbm_pool->size, GFP_ATOMIC);
+ if (num != hwbm_pool->size) {
WARN(1, "pool %d: %d of %d allocated\n",
- new_pool->id, num, new_pool->size);
+ new_pool->id, num, hwbm_pool->size);
return NULL;
}
}
@@ -284,7 +223,7 @@ void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
mvneta_bm_config_set(priv, MVNETA_BM_EMPTY_LIMIT_MASK);
- for (i = 0; i < bm_pool->buf_num; i++) {
+ for (i = 0; i < bm_pool->hwbm_pool.buf_num; i++) {
dma_addr_t buf_phys_addr;
u32 *vaddr;
@@ -303,13 +242,13 @@ void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
dma_unmap_single(&priv->pdev->dev, buf_phys_addr,
bm_pool->buf_size, DMA_FROM_DEVICE);
- mvneta_frag_free(bm_pool->frag_size, vaddr);
+ hwbm_buf_free(&bm_pool->hwbm_pool, vaddr);
}
mvneta_bm_config_clear(priv, MVNETA_BM_EMPTY_LIMIT_MASK);
/* Update BM driver with number of buffers removed from pool */
- bm_pool->buf_num -= i;
+ bm_pool->hwbm_pool.buf_num -= i;
}
EXPORT_SYMBOL_GPL(mvneta_bm_bufs_free);
@@ -317,6 +256,7 @@ EXPORT_SYMBOL_GPL(mvneta_bm_bufs_free);
void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool, u8 port_map)
{
+ struct hwbm_pool *hwbm_pool = &bm_pool->hwbm_pool;
bm_pool->port_map &= ~port_map;
if (bm_pool->port_map)
return;
@@ -324,11 +264,12 @@ void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
bm_pool->type = MVNETA_BM_FREE;
mvneta_bm_bufs_free(priv, bm_pool, port_map);
- if (bm_pool->buf_num)
+ if (hwbm_pool->buf_num)
WARN(1, "cannot free all buffers in pool %d\n", bm_pool->id);
if (bm_pool->virt_addr) {
- dma_free_coherent(&priv->pdev->dev, sizeof(u32) * bm_pool->size,
+ dma_free_coherent(&priv->pdev->dev,
+ sizeof(u32) * hwbm_pool->size,
bm_pool->virt_addr, bm_pool->phys_addr);
bm_pool->virt_addr = NULL;
}
@@ -381,10 +322,10 @@ static void mvneta_bm_pools_init(struct mvneta_bm *priv)
MVNETA_BM_POOL_CAP_ALIGN));
size = ALIGN(size, MVNETA_BM_POOL_CAP_ALIGN);
}
- bm_pool->size = size;
+ bm_pool->hwbm_pool.size = size;
mvneta_bm_write(priv, MVNETA_BM_POOL_SIZE_REG(i),
- bm_pool->size);
+ bm_pool->hwbm_pool.size);
/* Obtain custom pkt_size from DT */
sprintf(prop, "pool%d,pkt-size", i);
diff --git a/drivers/net/ethernet/marvell/mvneta_bm.h b/drivers/net/ethernet/marvell/mvneta_bm.h
index db239e061ab0..e74fd44a92f7 100644
--- a/drivers/net/ethernet/marvell/mvneta_bm.h
+++ b/drivers/net/ethernet/marvell/mvneta_bm.h
@@ -108,20 +108,15 @@ struct mvneta_bm {
};
struct mvneta_bm_pool {
+ struct hwbm_pool hwbm_pool;
/* Pool number in the range 0-3 */
u8 id;
enum mvneta_bm_type type;
- /* Buffer Pointers Pool External (BPPE) size in number of bytes */
- int size;
- /* Number of buffers used by this pool */
- int buf_num;
- /* Pool buffer size */
- int buf_size;
/* Packet size */
int pkt_size;
- /* Single frag size */
- u32 frag_size;
+ /* Size of the buffer acces through DMA*/
+ u32 buf_size;
/* BPPE virtual base address */
u32 *virt_addr;
@@ -143,8 +138,7 @@ void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool, u8 port_map);
void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
u8 port_map);
-int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- int buf_num);
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf);
int mvneta_bm_pool_refill(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool);
struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
@@ -170,8 +164,7 @@ void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool, u8 port_map) {}
void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
u8 port_map) {}
-int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- int buf_num) { return 0; }
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf) { return 0; }
int mvneta_bm_pool_refill(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool) {return 0; }
struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 net-next 00/10] API set for HW Buffer management
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
` (9 preceding siblings ...)
2016-03-10 10:09 ` [PATCH v5 net-next 10/10] net: mvneta: Use the new hwbm framework Gregory CLEMENT
@ 2016-03-14 2:02 ` David Miller
10 siblings, 0 replies; 12+ messages in thread
From: David Miller @ 2016-03-14 2:02 UTC (permalink / raw)
To: gregory.clement
Cc: linux-kernel, netdev, thomas.petazzoni, f.fainelli, jason,
andrew, sebastian.hesselbarth, linux-arm-kernel, alior, nadavh,
mw, simon.guinot, linux, w, timork, dima, nitroshift
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 10 Mar 2016 11:09:08 +0100
> This is the fifth version of the API set for HW Buffer management (that was
> initially submitted here:
> http://thread.gmane.org/gmane.linux.kernel/2125152).
This doesn't apply cleanly to net-next, please respin.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2016-03-14 2:02 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 01/10] misc: sram: add optional ioremap without write combining Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 02/10] ARM: dts: armada-38x: add buffer manager nodes Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 03/10] ARM: dts: armada-38x: enable buffer manager support on Armada 38x boards Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 04/10] ARM: dts: armada-xp: add buffer manager nodes Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 05/10] ARM: dts: armada-xp: enable buffer manager support on Armada XP boards Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 06/10] ARM: dts: armada-xp-openblocks-ax3-4: Add BM support Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 07/10] bus: mvebu-mbus: provide api for obtaining IO and DRAM window information Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 08/10] net: mvneta: bm: add support for hardware buffer management Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 09/10] net: add a hardware buffer management helper API Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 10/10] net: mvneta: Use the new hwbm framework Gregory CLEMENT
2016-03-14 2:02 ` [PATCH v5 net-next 00/10] API set for HW Buffer management David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).