From: Joseph CHANG <josright123@gmail.com>
To: Peter Korsgaard <jacmet@sunsite.dk>,
netdev@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
Joseph CHANG <josright123@gmail.com>
Cc: Joseph Chang <joseph_chang@davicom.com.tw>
Subject: [PATCH 3/3] dm9601: add support ethtool style utility
Date: Thu, 10 Mar 2016 19:24:27 +0800 [thread overview]
Message-ID: <1457609067-3674-1-git-send-email-josright123@gmail.com> (raw)
Add function dm9601_set_eeprom which tested good with ethtool
utility, include the eeprom words dump and the eeprom byte write.
Signed-off-by: Joseph CHANG <josright123@gmail.com>
---
drivers/net/usb/dm9601.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 50095df..a6904f4 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -61,6 +61,7 @@
#define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */
#define DM_TIMEOUT 1000
#define DM_EP3I_VAL 0x07
+#define MD96XX_EEPROM_MAGIC 0x9620
static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
{
@@ -289,6 +290,43 @@ static int dm9601_get_eeprom(struct net_device *net,
return 0;
}
+static int dm9601_set_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int offset = eeprom->offset;
+ int len = eeprom->len;
+ int done;
+
+ if (eeprom->magic != MD96XX_EEPROM_MAGIC) {
+ netdev_dbg(dev->net, "EEPROM: magic value mismatch, magic = 0x%x",
+ eeprom->magic);
+ return -EINVAL;
+ }
+
+ while (len > 0) {
+ if (len & 1 || offset & 1) {
+ int which = offset & 1;
+ u8 tmp[2];
+
+ dm_read_eeprom_word(dev, offset / 2, tmp);
+ tmp[which] = *data;
+ dm_write_eeprom_word(dev, offset / 2,
+ tmp[0] | tmp[1] << 8);
+ mdelay(10);
+ done = 1;
+ } else {
+ dm_write_eeprom_word(dev, offset / 2,
+ data[0] | data[1] << 8);
+ done = 2;
+ }
+ data += done;
+ offset += done;
+ len -= done;
+ }
+ return 0;
+}
+
static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
{
struct usbnet *dev = netdev_priv(netdev);
@@ -354,6 +392,7 @@ static const struct ethtool_ops dm9601_ethtool_ops = {
.set_msglevel = usbnet_set_msglevel,
.get_eeprom_len = dm9601_get_eeprom_len,
.get_eeprom = dm9601_get_eeprom,
+ .set_eeprom = dm9601_set_eeprom,
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.nway_reset = usbnet_nway_reset,
--
2.1.4
next reply other threads:[~2016-03-10 11:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-10 11:24 Joseph CHANG [this message]
2016-03-10 11:49 ` [PATCH 3/3] dm9601: add support ethtool style utility Ben Hutchings
[not found] <201603101253.u2ACrnUJ002444@mail.davicom.com.tw>
2016-03-10 13:17 ` Ben Hutchings
2016-03-11 11:08 ` Joseph Chang
2016-03-11 11:33 ` Ben Hutchings
2016-03-11 11:42 ` Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457609067-3674-1-git-send-email-josright123@gmail.com \
--to=josright123@gmail.com \
--cc=jacmet@sunsite.dk \
--cc=joseph_chang@davicom.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).