From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752716AbcCKLAB (ORCPT ); Fri, 11 Mar 2016 06:00:01 -0500 Received: from mail-pa0-f66.google.com ([209.85.220.66]:35498 "EHLO mail-pa0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752063AbcCKK6M (ORCPT ); Fri, 11 Mar 2016 05:58:12 -0500 From: Caesar Wang To: Heiko Stuebner , "David S. Miller" , Rob Herring Cc: linux-rockchip@lists.infradead.org, keescook@google.com, leozwang@google.com, Caesar Wang , Alexander Kochetkov , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/6] net: arc_emac: support the phy reset for emac driver Date: Fri, 11 Mar 2016 18:55:28 +0800 Message-Id: <1457693731-6966-4-git-send-email-wxt@rock-chips.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1457693731-6966-1-git-send-email-wxt@rock-chips.com> References: <1457693731-6966-1-git-send-email-wxt@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds to support the emac phy reset. 1) phy-reset-gpios: The phy-reset-gpios is an optional property for arc emac device tree boot. Change the binding document to match the driver code. 2) phy-reset-duration: Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree. 3) phy-reset-active-high: We need that for a custom hardware that needs the reverse reset sequence. Of course, this patch will fix the issue on https://patchwork.kernel.org/patch/8186801/. In some cases, the emac couldn't work if you don't have reset the phy. Let's add it to happy work. Signed-off-by: Caesar Wang --- drivers/net/ethernet/arc/emac_main.c | 41 ++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 6446af1..42384f6a 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -764,6 +764,45 @@ static const struct net_device_ops arc_emac_netdev_ops = { #endif }; +#ifdef CONFIG_OF +static void emac_reset_phy(struct net_device *pdev) +{ + int err, phy_reset; + bool active_high = false; + int msec = 10; + struct device *dev = pdev->dev.parent; + struct device_node *np = dev->of_node; + + if (!np) + return; + + of_property_read_u32(np, "phy-reset-duration", &msec); + /* A sane reset duration should not be longer than 1s */ + if (msec > 1000) + msec = 1; + + phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); + if (!gpio_is_valid(phy_reset)) + return; + + active_high = of_property_read_bool(np, "phy-reset-active-high"); + + err = devm_gpio_request_one(dev, phy_reset, active_high ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, + "phy-reset"); + if (err) { + dev_err(dev, "failed to get phy-reset-gpios: %d\n", err); + return; + } + msleep(msec); + gpio_set_value_cansleep(phy_reset, !active_high); +} +#else +static void emac_reset_phy(struct platform_device *pdev) +{ +} +#endif /* CONFIG_OF */ + int arc_emac_probe(struct net_device *ndev, int interface) { struct device *dev = ndev->dev.parent; @@ -803,6 +842,8 @@ int arc_emac_probe(struct net_device *ndev, int interface) /* FIXME :: no multicast support yet */ ndev->flags &= ~IFF_MULTICAST; + emac_reset_phy(ndev); + priv = netdev_priv(ndev); priv->dev = dev; -- 1.9.1