linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vishnu Patekar <vishnupatekar0510@gmail.com>
To: robh+dt@kernel.org, corbet@lwn.net, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, maxime.ripard@free-electrons.com,
	linux@arm.linux.org.uk, emilio@elopez.com.ar
Cc: jenskuske@gmail.com, hdegoede@redhat.com, wens@csie.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	linux-gpio@vger.kernel.org, linus.walleij@linaro.org,
	mturquette@baylibre.com, sboyd@codeaurora.org,
	patchesrdh@mveas.com, linux-clk@vger.kernel.org
Subject: [PATCH v4 04/13] ARM: dts: sun8i-a83t: Add basic clocks and resets
Date: Thu, 17 Mar 2016 00:04:27 +0800	[thread overview]
Message-ID: <1458144276-31108-5-git-send-email-vishnupatekar0510@gmail.com> (raw)
In-Reply-To: <1458144276-31108-1-git-send-email-vishnupatekar0510@gmail.com>

This adds A83T system bus clocks, bus gates, and clock resets.

Three ahb reset registers are combined into one node.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 114 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 112 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index d3473f8..2689af4 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -146,6 +146,97 @@
 			clocks = <&osc16M>;
 			clock-output-names = "osc16M-d512";
 		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-pll4-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6";
+		};
+
+		pll6d2: pll6d2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll6>;
+			clock-output-names = "pll6d2";
+		};
+
+		ahb1: clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "ahb1";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-apb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		apb2: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "apb2";
+		};
+
+		ahb2: clk@01c2005c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-h3-ahb2-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&ahb1>, <&pll6d2>;
+			clock-output-names = "ahb2";
+		};
+
+		bus_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a83t-bus-gates-clk";
+			reg = <0x01c20060 0x10>;
+			clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+			clock-names = "ahb1", "ahb2", "apb1", "apb2";
+			clock-indices = <1>, <5>, <6>,
+					<8>, <9>, <10>,
+					<13>, <14>, <17>,
+					<19>, <20>,
+					<21>, <24>,
+					<26>, <27>,
+					<29>, <32>,
+					<36>, <37>,
+					<40>, <43>,
+					<44>, <52>, <53>,
+					<54>, <65>,
+					<69>, <76>, <77>,
+					<78>, <79>, <96>,
+					<97>, <98>,
+					<112>, <113>,
+					<114>, <115>,
+					<116>;
+			clock-output-names = "bus_mipidsi", "bus_ss", "bus_dma",
+					     "bus_mmc0", "bus_mmc1", "bus_mmc2",
+					     "bus_nand", "bus_sdram", "bus_emac",
+					     "bus_hstimer", "bus_spi0",
+					     "bus_spi1", "bus_usb_otg",
+					     "bus_ehci0", "bus_ehci1",
+					     "bus_ohci0", "bus_ve",
+					     "bus_lcd0", "bus_lcd1",
+					     "bus_csi", "bus_hdmi",
+					     "bus_de", "bus_gpu", "bus_msgbox",
+					     "bus_spinlock", "bus_spdif",
+					     "bus_pio", "bus_i2s0", "bus_i2s1",
+					     "bus_i2s2", "bus_tdm", "bus_i2c0",
+					     "bus_i2c1", "bus_i2c2",
+					     "bus_uart0", "bus_uart1",
+					     "bus_uart2", "bus_uart3",
+					     "bus_uart4";
+		};
 	};
 
 	soc {
@@ -160,7 +251,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&osc24M>;
+			clocks = <&bus_gates 69>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -189,6 +280,24 @@
 			};
 		};
 
+		ahb_reset: reset@01c202c0 {
+			reg = <0x01c202c0 0xc>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		apb1_reset: reset@01c202d0 {
+			reg = <0x01c202d0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		apb2_reset: reset@01c202d8 {
+			reg = <0x01c202d8 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
@@ -210,7 +319,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&bus_gates 112>;
+			resets = <&apb2_reset 16>;
 			status = "disabled";
 		};
 
-- 
1.9.1

  parent reply	other threads:[~2016-03-16 16:06 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-16 16:04 [PATCH v4 00/13] Add A83T clk, r_pio, mmc rsb support Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 01/13] pinctrl: sunxi: Add A83T R_PIO controller Vishnu Patekar
2016-03-17 14:51   ` Linus Walleij
2016-03-17 15:34     ` Vishnu Patekar
2016-03-22 13:12       ` Linus Walleij
2016-03-22 13:16         ` Linus Walleij
2016-03-16 16:04 ` [PATCH v4 02/13] clk: sunxi: add ahb1 clock for A83T Vishnu Patekar
2016-03-17 10:40   ` Maxime Ripard
2016-04-04  3:07     ` Vishnu Patekar
2016-04-14 17:28       ` Maxime Ripard
2016-04-16 15:59         ` Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 03/13] clk: sunxi: Add APB1 " Vishnu Patekar
2016-03-17 10:41   ` Maxime Ripard
2016-03-16 16:04 ` Vishnu Patekar [this message]
2016-03-16 16:04 ` [PATCH v4 05/13] ARM: dts: sun8i-a83t: add mmc clock nodes Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 06/13] ARM: dts: sun8i-a83t: Add mmc controller nodes Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 07/13] ARM: dts: sun8i-a83t: Add PRCM related clocks and resets Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 08/13] ARM: dts: sun8i-a83t: Add R_PIO controller node to the dtsi Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 09/13] ARM: dts: sun8i-a83t: Add RSB controller device node to dtsi Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 10/13] ARM: dts: sun8i-a83t: add mmc0 CD pin Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 11/13] ARM: dts: sun8i: enable mmc for H8Homlet Board Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 12/13] ARM: dts: sun8i: Add A83T based Sinovoip Bpi-M3 Board Vishnu Patekar
2016-03-16 16:04 ` [PATCH v4 13/13] ARM: sunxi: Add Kconfig for sunxi clocks Vishnu Patekar
2016-03-16 17:20   ` [linux-sunxi] " Priit Laes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458144276-31108-5-git-send-email-vishnupatekar0510@gmail.com \
    --to=vishnupatekar0510@gmail.com \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=galak@codeaurora.org \
    --cc=hdegoede@redhat.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jenskuske@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=patchesrdh@mveas.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).