From: "Matias Bjørling" <m@bjorling.me>
To: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org, axboe@fb.com
Cc: "Matias Bjørling" <m@bjorling.me>
Subject: [PATCH 04/28] lightnvm: add fpg_size and pfpg_size to struct nvm_dev
Date: Fri, 6 May 2016 20:02:57 +0200 [thread overview]
Message-ID: <1462557801-24974-5-git-send-email-m@bjorling.me> (raw)
In-Reply-To: <1462557801-24974-1-git-send-email-m@bjorling.me>
The flash page size (fpg) and size across planes (pfpg) are convenient
to know when allocating buffer sizes. This has previously been a
calculated in various places. Replace with the pre-calculated values.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
---
drivers/lightnvm/core.c | 2 ++
drivers/lightnvm/sysblk.c | 17 +++++++----------
include/linux/lightnvm.h | 2 ++
3 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index f4e04a5..652b8c7 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -476,6 +476,8 @@ static int nvm_core_init(struct nvm_dev *dev)
dev->pgs_per_blk = grp->num_pg;
dev->blks_per_lun = grp->num_blk;
dev->nr_planes = grp->num_pln;
+ dev->fpg_size = grp->fpg_sz;
+ dev->pfpg_size = grp->fpg_sz * grp->num_pln;
dev->sec_size = grp->csecs;
dev->oob_size = grp->sos;
dev->sec_per_pg = grp->fpg_sz / grp->csecs;
diff --git a/drivers/lightnvm/sysblk.c b/drivers/lightnvm/sysblk.c
index b1e1404..b6971f8 100644
--- a/drivers/lightnvm/sysblk.c
+++ b/drivers/lightnvm/sysblk.c
@@ -154,13 +154,12 @@ static int nvm_scan_block(struct nvm_dev *dev, struct ppa_addr *ppa,
struct nvm_system_block *sblk)
{
struct nvm_system_block *cur;
- int pg, cursz, ret, found = 0;
+ int pg, ret, found = 0;
/* the full buffer for a flash page is allocated. Only the first of it
* contains the system block information
*/
- cursz = dev->sec_size * dev->sec_per_pg * dev->nr_planes;
- cur = kmalloc(cursz, GFP_KERNEL);
+ cur = kmalloc(dev->pfpg_size, GFP_KERNEL);
if (!cur)
return -ENOMEM;
@@ -169,7 +168,7 @@ static int nvm_scan_block(struct nvm_dev *dev, struct ppa_addr *ppa,
ppa->g.pg = ppa_to_slc(dev, pg);
ret = nvm_submit_ppa(dev, ppa, 1, NVM_OP_PREAD, NVM_IO_SLC_MODE,
- cur, cursz);
+ cur, dev->pfpg_size);
if (ret) {
if (ret == NVM_RSP_ERR_EMPTYPAGE) {
pr_debug("nvm: sysblk scan empty ppa (%u %u %u %u)\n",
@@ -272,14 +271,12 @@ static int nvm_write_and_verify(struct nvm_dev *dev, struct nvm_sb_info *info,
{
struct nvm_system_block nvmsb;
void *buf;
- int i, sect, ret = 0, bufsz;
+ int i, sect, ret = 0;
struct ppa_addr *ppas;
nvm_cpu_to_sysblk(&nvmsb, info);
- /* buffer for flash page */
- bufsz = dev->sec_size * dev->sec_per_pg * dev->nr_planes;
- buf = kzalloc(bufsz, GFP_KERNEL);
+ buf = kzalloc(dev->pfpg_size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
memcpy(buf, &nvmsb, sizeof(struct nvm_system_block));
@@ -309,7 +306,7 @@ static int nvm_write_and_verify(struct nvm_dev *dev, struct nvm_sb_info *info,
}
ret = nvm_submit_ppa(dev, ppas, dev->sec_per_pg, NVM_OP_PWRITE,
- NVM_IO_SLC_MODE, buf, bufsz);
+ NVM_IO_SLC_MODE, buf, dev->pfpg_size);
if (ret) {
pr_err("nvm: sysblk failed program (%u %u %u)\n",
ppas[0].g.ch,
@@ -319,7 +316,7 @@ static int nvm_write_and_verify(struct nvm_dev *dev, struct nvm_sb_info *info,
}
ret = nvm_submit_ppa(dev, ppas, dev->sec_per_pg, NVM_OP_PREAD,
- NVM_IO_SLC_MODE, buf, bufsz);
+ NVM_IO_SLC_MODE, buf, dev->pfpg_size);
if (ret) {
pr_err("nvm: sysblk failed read (%u %u %u)\n",
ppas[0].g.ch,
diff --git a/include/linux/lightnvm.h b/include/linux/lightnvm.h
index 38814e2..f7c607f 100644
--- a/include/linux/lightnvm.h
+++ b/include/linux/lightnvm.h
@@ -323,6 +323,8 @@ struct nvm_dev {
int sec_per_pg; /* only sectors for a single page */
int pgs_per_blk;
int blks_per_lun;
+ int fpg_size;
+ int pfpg_size; /* size of buffer if all pages are to be read */
int sec_size;
int oob_size;
int mccap;
--
2.1.4
next prev parent reply other threads:[~2016-05-06 18:03 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 18:02 [PATCH 00/28] LightNVM fixes for 4.7 Matias Bjørling
2016-05-06 18:02 ` [PATCH 01/28] lightnvm: fix "warning: ‘ret’ may be used uninitialized" Matias Bjørling
2016-05-06 18:02 ` [PATCH 02/28] lightnvm: handle submit_io failure Matias Bjørling
2016-05-06 18:02 ` [PATCH 03/28] lightnvm: implement nvm_submit_ppa_list Matias Bjørling
2016-05-06 18:02 ` Matias Bjørling [this message]
2016-05-06 18:02 ` [PATCH 05/28] lightnvm: move block fold outside of get_bb_tbl() Matias Bjørling
2016-05-06 18:02 ` [PATCH 06/28] lightnvm: avoid memory leak when lun_map kcalloc fails Matias Bjørling
2016-05-06 18:03 ` [PATCH 07/28] lightnvm: calculate rrpc total blocks and sectors up front Matias Bjørling
2016-05-06 18:03 ` [PATCH 08/28] lightnvm: store rrpc->soffset in device sector size Matias Bjørling
2016-05-06 18:03 ` [PATCH 09/28] lightnvm: rename nvm_targets to nvm_tgt_type Matias Bjørling
2016-05-06 18:03 ` [PATCH 10/28] lightnvm: refactor dev->online_target to global nvm_targets Matias Bjørling
2016-05-06 18:03 ` [PATCH 11/28] lightnvm: introduce nvm_for_each_lun_ppa() macro Matias Bjørling
2016-05-06 18:03 ` [PATCH 12/28] lightnvm: refactor device ops->get_bb_tbl() Matias Bjørling
2016-05-06 18:03 ` [PATCH 13/28] lightnvm: remove struct factory_blks Matias Bjørling
2016-05-06 18:03 ` [PATCH 14/28] lightnvm: make nvm_set_rqd_ppalist() aware of vblks Matias Bjørling
2016-05-06 18:03 ` [PATCH 15/28] lightnvm: move responsibility for bad blk mgmt to target Matias Bjørling
2016-05-06 18:03 ` [PATCH 16/28] lightnvm: refactor set_bb_tbl for accepting ppa list Matias Bjørling
2016-05-06 18:03 ` [PATCH 17/28] lightnvm: fix out of bound ppa lun id on bb tbl Matias Bjørling
2016-05-06 18:03 ` [PATCH 18/28] lightnvm: do not free unused metadata on rrpc Matias Bjørling
2016-05-06 18:03 ` [PATCH 19/28] lightnvm: enable metadata to be sent to device Matias Bjørling
2016-05-06 18:03 ` [PATCH 20/28] lightnvm: rename dma helper functions Matias Bjørling
2016-05-06 18:03 ` [PATCH 21/28] nvme/lightnvm: Log using the ctrl named device Matias Bjørling
2016-05-06 18:03 ` [PATCH 22/28] lightnvm: do not assume sequential lun alloc Matias Bjørling
2016-05-06 18:03 ` [PATCH 23/28] lightnvm: pass dma address to hardware rather than pointer Matias Bjørling
2016-05-06 18:03 ` [PATCH 24/28] lightnvm: remove mgt targets on mgt removal Matias Bjørling
2016-05-06 18:03 ` [PATCH 25/28] lightnvm: expose gennvm_mark_blk to targets Matias Bjørling
2016-05-06 18:03 ` [PATCH 26/28] lightnvm: add is_cached entry to struct ppa_addr Matias Bjørling
2016-05-06 18:03 ` [PATCH 27/28] lightnvm: rename nr_pages to nr_ppas on nvm_rq Matias Bjørling
2016-05-06 18:03 ` [PATCH 28/28] lightnvm: reserved space calculation incorrect Matias Bjørling
2016-05-10 14:43 ` [PATCH 00/28] LightNVM fixes for 4.7 Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462557801-24974-5-git-send-email-m@bjorling.me \
--to=m@bjorling.me \
--cc=axboe@fb.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).