From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Tomasz Figa <tomasz.figa@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v4 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
Date: Sun, 15 May 2016 22:13:48 +0200 [thread overview]
Message-ID: <1463343243-26429-8-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1463343243-26429-1-git-send-email-krzk@kernel.org>
The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
added) thus removing duplication.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +----------------
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 35 +----------------
arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +++++++++++++++++++++++++
3 files changed, 52 insertions(+), 68 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
};
&pwm {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
};
&i2c_0 {
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+};
--
2.5.0
next prev parent reply other threads:[~2016-05-15 20:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-15 20:13 [PATCH v4 00/22] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 04/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 06/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski
2016-05-15 20:13 ` Krzysztof Kozlowski [this message]
2016-05-15 20:13 ` [PATCH v4 08/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 09/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 10/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 11/22] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 15/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 16/22] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 17/22] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski
2016-05-15 20:13 ` [PATCH v4 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-15 20:14 ` [PATCH v4 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks Krzysztof Kozlowski
2016-05-15 20:14 ` [PATCH v4 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski
2016-05-15 20:14 ` [PATCH v4 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski
2016-05-15 20:14 ` [PATCH v4 22/22] ARM: dts: exynos: Add RTC and I2C " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463343243-26429-8-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=javier@osg.samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@codeaurora.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).