From: "Rafał Miłecki" <zajec5@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
"Brett Rudley" <brudley@broadcom.com>,
"Arend van Spriel" <arend@broadcom.com>,
"Franky (Zhenhui) Lin" <frankyl@broadcom.com>,
"Hante Meuleman" <meuleman@broadcom.com>,
"Pieter-Paul Giesberts" <pieterpg@broadcom.com>,
linux-wireless@vger.kernel.org (open list:BROADCOM BRCM80211
IEEE802.11n WIRELESS DRIVER),
brcm80211-dev-list@broadcom.com (open list:BROADCOM BRCM80211
IEEE802.11n WIRELESS DRIVER),
netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V2 4.8 2/2] brcmfmac: support get_channel cfg80211 callback
Date: Fri, 20 May 2016 13:38:58 +0200 [thread overview]
Message-ID: <1463744355-5528-2-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1463744355-5528-1-git-send-email-zajec5@gmail.com>
This is important for brcmfmac as some of released firmwares (e.g.
brcmfmac4366b-pcie.bin) may pick different channel than requested. This
has been tested with BCM4366B1 in D-Link DIR-885L.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
V2: Check if ndev isn't NULL, update description.
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 63 ++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 597495d..299a404 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -4892,6 +4892,68 @@ exit:
return err;
}
+static int brcmf_cfg80211_get_channel(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ struct cfg80211_chan_def *chandef)
+{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct net_device *ndev = wdev->netdev;
+ struct brcmf_if *ifp;
+ struct brcmu_chan ch;
+ enum nl80211_band band = 0;
+ enum nl80211_chan_width width = 0;
+ u32 chanspec;
+ int freq, err;
+
+ if (!ndev)
+ return -ENODEV;
+ ifp = netdev_priv(ndev);
+
+ err = brcmf_fil_iovar_int_get(ifp, "chanspec", &chanspec);
+ if (err) {
+ brcmf_err("chanspec failed (%d)\n", err);
+ return err;
+ }
+
+ ch.chspec = chanspec;
+ cfg->d11inf.decchspec(&ch);
+
+ switch (ch.band) {
+ case BRCMU_CHAN_BAND_2G:
+ band = NL80211_BAND_2GHZ;
+ break;
+ case BRCMU_CHAN_BAND_5G:
+ band = NL80211_BAND_5GHZ;
+ break;
+ }
+
+ switch (ch.bw) {
+ case BRCMU_CHAN_BW_80:
+ width = NL80211_CHAN_WIDTH_80;
+ break;
+ case BRCMU_CHAN_BW_40:
+ width = NL80211_CHAN_WIDTH_40;
+ break;
+ case BRCMU_CHAN_BW_20:
+ width = NL80211_CHAN_WIDTH_20;
+ break;
+ case BRCMU_CHAN_BW_80P80:
+ width = NL80211_CHAN_WIDTH_80P80;
+ break;
+ case BRCMU_CHAN_BW_160:
+ width = NL80211_CHAN_WIDTH_160;
+ break;
+ }
+
+ freq = ieee80211_channel_to_frequency(ch.control_ch_num, band);
+ chandef->chan = ieee80211_get_channel(wiphy, freq);
+ chandef->width = width;
+ chandef->center_freq1 = ieee80211_channel_to_frequency(ch.chnum, band);
+ chandef->center_freq2 = 0;
+
+ return 0;
+}
+
static int brcmf_cfg80211_crit_proto_start(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_crit_proto_id proto,
@@ -5054,6 +5116,7 @@ static struct cfg80211_ops brcmf_cfg80211_ops = {
.mgmt_tx = brcmf_cfg80211_mgmt_tx,
.remain_on_channel = brcmf_p2p_remain_on_channel,
.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel,
+ .get_channel = brcmf_cfg80211_get_channel,
.start_p2p_device = brcmf_p2p_start_device,
.stop_p2p_device = brcmf_p2p_stop_device,
.crit_proto_start = brcmf_cfg80211_crit_proto_start,
--
1.8.4.5
next prev parent reply other threads:[~2016-05-20 11:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-19 11:02 [PATCH 4.8 1/2] brcmutil: add field storing control channel to the struct brcmu_chan Rafał Miłecki
2016-05-19 11:02 ` [PATCH 4.8 2/2] brcmfmac: support get_channel cfg80211 callback Rafał Miłecki
2016-05-20 7:42 ` Arend Van Spriel
2016-05-20 10:54 ` Rafał Miłecki
2016-05-20 7:52 ` [PATCH 4.8 1/2] brcmutil: add field storing control channel to the struct brcmu_chan Arend Van Spriel
2016-05-20 11:38 ` [PATCH V2 " Rafał Miłecki
2016-05-20 11:38 ` Rafał Miłecki [this message]
2016-06-14 14:28 ` [V2, 4.8, " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463744355-5528-2-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=arend@broadcom.com \
--cc=brcm80211-dev-list@broadcom.com \
--cc=brudley@broadcom.com \
--cc=frankyl@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=meuleman@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pieterpg@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).