[PATCH V3 0/2] i2c: qup: Some misc fixes

[PATCH V3 0/2] i2c: qup: Some misc fixes

[Sricharan R]

One for fixing the bug with CONFIG_DEBUG_SG enabled and another
to suspend the transfer for all errors instead of just for NACK.

[V3] Added more commit description. Return more appropriate
     error codes for NACK and other bus errors. Corrected
     other bus errors handling procedure for dma mode as well.
     Removed the dev_err log for NACKs.

[V2] Removed the use of unnecessary variable assignment.

Kept the reviewed and Tested by tag for patch#1,
as there was no code change.

Depends on patch[1] for the error handling to be complete.

[1] https://lkml.org/lkml/2016/5/9/447

Sricharan R (2):
  i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled
  i2c: qup: Fix error handling

 drivers/i2c/busses/i2c-qup.c | 129 +++++++++++++++++++------------------------
 1 file changed, 58 insertions(+), 71 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V3 1/2] i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled

[Sricharan R]

With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen,

------------[ cut here ]------------
kernel BUG at include/linux/scatterlist.h:140!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000
PC is at qup_sg_set_buf.isra.13+0x138/0x154
LR is at qup_sg_set_buf.isra.13+0x50/0x154
pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145
sp : ffffffc0368735c0
x29: ffffffc0368735c0 x28: ffffffc036873752
x27: ffffffc035233018 x26: ffffffc000c4e000
x25: 0000000000000000 x24: 0000000000000004
x23: 0000000000000000 x22: ffffffc035233668
x21: ffffff80004e3000 x20: ffffffc0352e0018
x19: 0000004000000000 x18: 0000000000000028
x17: 0000000000000004 x16: ffffffc0017a39c8
x15: 0000000000001cdf x14: ffffffc0019929d8
x13: ffffffc0352e0018 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000001
x9 : ffffffc0012b2d70 x8 : ffffff80004e3000
x7 : 0000000000000018 x6 : 0000000030000000
x5 : ffffffc00199f018 x4 : ffffffc035233018
x3 : 0000000000000004 x2 : 00000000c0000000
x1 : 0000000000000003 x0 : 0000000000000000

Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020)
Stack: (0xffffffc0368735c0 to 0xffffffc036874000)

sg_set_buf expects that the buf parameter passed in should be from
lowmem and a valid pageframe. This is not true for pages from
dma_alloc_coherent which can be carveouts, hence the check fails.
Change allocation of sg buffers from dma_coherent memory to kzalloc
to fix the issue.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Tested-by: Naveen Kaje <nkaje@codeaurora.org>
---
[V3] Added more commit description.

 drivers/i2c/busses/i2c-qup.c | 53 ++++++++++++++------------------------------
 1 file changed, 17 insertions(+), 36 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 23eaabb..8620e99 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -585,8 +585,8 @@ static void qup_i2c_bam_cb(void *data)
 }
 
 static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
-			  struct qup_i2c_tag *tg, unsigned int buflen,
-			  struct qup_i2c_dev *qup, int map, int dir)
+			  unsigned int buflen, struct qup_i2c_dev *qup,
+			  int dir)
 {
 	int ret;
 
@@ -595,9 +595,6 @@ static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
 	if (!ret)
 		return -EINVAL;
 
-	if (!map)
-		sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start);
-
 	return 0;
 }
 
@@ -670,16 +667,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 				/* scratch buf to read the start and len tags */
 				ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
 						     &qup->brx.tag.start[0],
-						     &qup->brx.tag,
-						     2, qup, 0, 0);
+						     2, qup, DMA_FROM_DEVICE);
 
 				if (ret)
 					return ret;
 
 				ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
 						     &msg->buf[limit * i],
-						     NULL, tlen, qup,
-						     1, DMA_FROM_DEVICE);
+						     tlen, qup,
+						     DMA_FROM_DEVICE);
 				if (ret)
 					return ret;
 
@@ -688,7 +684,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 			}
 			ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
 					     &qup->start_tag.start[off],
-					     &qup->start_tag, len, qup, 0, 0);
+					     len, qup, DMA_TO_DEVICE);
 			if (ret)
 				return ret;
 
@@ -696,8 +692,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 			/* scratch buf to read the BAM EOT and FLUSH tags */
 			ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
 					     &qup->brx.tag.start[0],
-					     &qup->brx.tag, 2,
-					     qup, 0, 0);
+					     2, qup, DMA_FROM_DEVICE);
 			if (ret)
 				return ret;
 		} else {
@@ -709,17 +704,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 				len = qup_i2c_set_tags(tags, qup, msg, 1);
 
 				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
-						     tags,
-						     &qup->start_tag, len,
-						     qup, 0, 0);
+						     tags, len,
+						     qup, DMA_TO_DEVICE);
 				if (ret)
 					return ret;
 
 				tx_len += len;
 				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
 						     &msg->buf[limit * i],
-						     NULL, tlen, qup, 1,
-						     DMA_TO_DEVICE);
+						     tlen, qup, DMA_TO_DEVICE);
 				if (ret)
 					return ret;
 				i++;
@@ -738,8 +731,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 							QUP_BAM_FLUSH_STOP;
 				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
 						     &qup->btx.tag.start[0],
-						     &qup->btx.tag, len,
-						     qup, 0, 0);
+						     len, qup, DMA_TO_DEVICE);
 				if (ret)
 					return ret;
 				tx_nents += 1;
@@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
 		}
 	}
 
+	idx = 0;
+
 	do {
 		if (msgs[idx].len == 0) {
 			ret = -EINVAL;
@@ -1407,27 +1401,21 @@ static int qup_i2c_probe(struct platform_device *pdev)
 
 		/* 2 tag bytes for each block + 5 for start, stop tags */
 		size = blocks * 2 + 5;
-		qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev,
-					     size, 4, 0);
 
-		qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL,
-						      &qup->start_tag.addr);
+		qup->start_tag.start = devm_kzalloc(&pdev->dev,
+						    size, GFP_KERNEL);
 		if (!qup->start_tag.start) {
 			ret = -ENOMEM;
 			goto fail_dma;
 		}
 
-		qup->brx.tag.start = dma_pool_alloc(qup->dpool,
-						    GFP_KERNEL,
-						    &qup->brx.tag.addr);
+		qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
 		if (!qup->brx.tag.start) {
 			ret = -ENOMEM;
 			goto fail_dma;
 		}
 
-		qup->btx.tag.start = dma_pool_alloc(qup->dpool,
-						    GFP_KERNEL,
-						    &qup->btx.tag.addr);
+		qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
 		if (!qup->btx.tag.start) {
 			ret = -ENOMEM;
 			goto fail_dma;
@@ -1566,13 +1554,6 @@ static int qup_i2c_remove(struct platform_device *pdev)
 	struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
 
 	if (qup->is_dma) {
-		dma_pool_free(qup->dpool, qup->start_tag.start,
-			      qup->start_tag.addr);
-		dma_pool_free(qup->dpool, qup->brx.tag.start,
-			      qup->brx.tag.addr);
-		dma_pool_free(qup->dpool, qup->btx.tag.start,
-			      qup->btx.tag.addr);
-		dma_pool_destroy(qup->dpool);
 		dma_release_channel(qup->btx.dma);
 		dma_release_channel(qup->brx.dma);
 	}
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V3 2/2] i2c: qup: Fix error handling

[Sricharan R]

Among the bus errors reported from the QUP_MASTER_STATUS register
only NACK is considered and transfer gets suspended, while
other errors are ignored. Correct this and suspend the transfer
for other errors as well. This avoids unnecessary 'timeouts' which
happens when waiting for events that would never happen when there
is already an error condition on the bus. Also the error handling
procedure should be the same for both NACK and other bus errors in
case of dma mode. So correct that as well.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
[V3] Change the return error code for NACK and other bus errors.
     Added the error handling procedure for other bus errors in
     dma mode. Removed the dev_err print in case of NACK.

 drivers/i2c/busses/i2c-qup.c | 76 ++++++++++++++++++++++++--------------------
 1 file changed, 41 insertions(+), 35 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 8620e99..edced86 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -310,6 +310,7 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
 	u32 opflags;
 	u32 status;
 	u32 shift = __ffs(op);
+	int ret = 0;
 
 	len *= qup->one_byte_t;
 	/* timeout after a wait of twice the max time */
@@ -321,18 +322,28 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
 
 		if (((opflags & op) >> shift) == val) {
 			if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
-				if (!(status & I2C_STATUS_BUS_ACTIVE))
-					return 0;
+				if (!(status & I2C_STATUS_BUS_ACTIVE)) {
+					ret = 0;
+					goto done;
+				}
 			} else {
-				return 0;
+				ret = 0;
+				goto done;
 			}
 		}
 
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-
+		if (time_after(jiffies, timeout)) {
+			ret = -ETIMEDOUT;
+			goto done;
+		}
 		usleep_range(len, len * 2);
 	}
+
+done:
+	if (qup->bus_err || qup->qup_err)
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+
+	return ret;
 }
 
 static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
@@ -793,39 +804,35 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 	}
 
 	if (ret || qup->bus_err || qup->qup_err) {
-		if (qup->bus_err & QUP_I2C_NACK_FLAG) {
-			msg--;
-			dev_err(qup->dev, "NACK from %x\n", msg->addr);
-			ret = -EIO;
+		if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+			dev_err(qup->dev, "change to run state timed out");
+			goto desc_err;
+		}
 
-			if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
-				dev_err(qup->dev, "change to run state timed out");
-				return ret;
-			}
+		if (rx_nents)
+			writel(QUP_BAM_INPUT_EOT,
+			       qup->base + QUP_OUT_FIFO_BASE);
 
-			if (rx_nents)
-				writel(QUP_BAM_INPUT_EOT,
-				       qup->base + QUP_OUT_FIFO_BASE);
+		writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE);
 
-			writel(QUP_BAM_FLUSH_STOP,
-			       qup->base + QUP_OUT_FIFO_BASE);
+		qup_i2c_flush(qup);
 
-			qup_i2c_flush(qup);
+		/* wait for remaining interrupts to occur */
+		if (!wait_for_completion_timeout(&qup->xfer, HZ))
+			dev_err(qup->dev, "flush timed out\n");
 
-			/* wait for remaining interrupts to occur */
-			if (!wait_for_completion_timeout(&qup->xfer, HZ))
-				dev_err(qup->dev, "flush timed out\n");
+		qup_i2c_rel_dma(qup);
 
-			qup_i2c_rel_dma(qup);
-		}
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
 	}
 
+desc_err:
 	dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
 
 	if (rx_nents)
 		dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
 			     DMA_FROM_DEVICE);
-desc_err:
+
 	return ret;
 }
 
@@ -841,9 +848,6 @@ static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
 	if (ret)
 		goto out;
 
-	qup->bus_err = 0;
-	qup->qup_err = 0;
-
 	writel(0, qup->base + QUP_MX_INPUT_CNT);
 	writel(0, qup->base + QUP_MX_OUTPUT_CNT);
 
@@ -881,12 +885,8 @@ static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup,
 		ret = -ETIMEDOUT;
 	}
 
-	if (qup->bus_err || qup->qup_err) {
-		if (qup->bus_err & QUP_I2C_NACK_FLAG) {
-			dev_err(qup->dev, "NACK from %x\n", msg->addr);
-			ret = -EIO;
-		}
-	}
+	if (qup->bus_err || qup->qup_err)
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
 
 	return ret;
 }
@@ -1178,6 +1178,9 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
 	if (ret < 0)
 		goto out;
 
+	qup->bus_err = 0;
+	qup->qup_err = 0;
+
 	writel(1, qup->base + QUP_SW_RESET);
 	ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
 	if (ret)
@@ -1227,6 +1230,9 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
 	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
 	int ret, len, idx = 0, use_dma = 0;
 
+	qup->bus_err = 0;
+	qup->qup_err = 0;
+
 	ret = pm_runtime_get_sync(qup->dev);
 	if (ret < 0)
 		goto out;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V3 1/2] i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 628 bytes --]


> sg_set_buf expects that the buf parameter passed in should be from
> lowmem and a valid pageframe. This is not true for pages from
> dma_alloc_coherent which can be carveouts, hence the check fails.

OK, given you mean dma_pool_alloc here, the check fails for the
pageframe because of the pool? Is my understanding correct?

> Change allocation of sg buffers from dma_coherent memory to kzalloc
> to fix the issue.

But why can you drop the coherency?

> @@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
>  		}
>  	}
>  
> +	idx = 0;
> +

This looks like an unrelated change.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

RE: [PATCH V3 1/2] i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled

[Sricharan]

Hi,

>> sg_set_buf expects that the buf parameter passed in should be from
>> lowmem and a valid pageframe. This is not true for pages from
>> dma_alloc_coherent which can be carveouts, hence the check fails.
>
>OK, given you mean dma_pool_alloc here, the check fails for the
>pageframe because of the pool? Is my understanding correct?
>
Yes right. Since those are carveouts, there is no valid pageframe,
 so the check fails.

>> Change allocation of sg buffers from dma_coherent memory to kzalloc
>> to fix the issue.
>
>But why can you drop the coherency?
>
 The coherency is not dropped here. dma_map/unmap used
 makes the buffer coherent before passing it to
 dmaengine. Previously it was not required.
 I can add this in description if its not clear.

 >> @@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
>>  		}
>>  	}
>>
>> +	idx = 0;
>> +
>
>This looks like an unrelated change.
    Ha, wrong. This should have been in a separate patch. This was to fix a
    initialization issue in dma mode. Sorry, should not have been here, will
    move it to out.

Regards,
 Sricharan

Re: [PATCH V3 1/2] i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 525 bytes --]


>  The coherency is not dropped here. dma_map/unmap used
>  makes the buffer coherent before passing it to
>  dmaengine. Previously it was not required.
>  I can add this in description if its not clear.

Please do.

> 
>  >> @@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
> >>  		}
> >>  	}
> >>
> >> +	idx = 0;
> >> +
> >
> >This looks like an unrelated change.
>     Ha, wrong. This should have been in a separate patch.

Exactly this is what I meant with "unrelated" :)


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]