linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: felipe.balbi@linux.intel.com,
	Mathias Nyman <mathias.nyman@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Lee Jones <lee.jones@linaro.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH v10 5/7] mfd: intel_vuport: Add Intel virtual USB port MFD Driver
Date: Thu,  2 Jun 2016 09:37:27 +0800	[thread overview]
Message-ID: <1464831449-8973-6-git-send-email-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <1464831449-8973-1-git-send-email-baolu.lu@linux.intel.com>

Some Intel platforms have an USB port mux controlled by GPIOs.
There's a single ACPI platform device that provides 1) USB ID
extcon device; 2) USB vbus regulator device; and 3) USB port
switch device. This MFD driver will split these 3 devices for
their respective drivers.

[baolu: removed .owner per platform_no_drv_owner.cocci]
Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/Kconfig        |  8 +++++
 drivers/mfd/Makefile       |  1 +
 drivers/mfd/intel-vuport.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 95 insertions(+)
 create mode 100644 drivers/mfd/intel-vuport.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1bcf601..94affb3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1603,5 +1603,13 @@ config MFD_VEXPRESS_SYSREG
 	  System Registers are the platform configuration block
 	  on the ARM Ltd. Versatile Express board.
 
+config MFD_INTEL_VUPORT
+	tristate "Intel virtual USB port controller"
+	select MFD_CORE
+	depends on X86 && ACPI
+	help
+	  Say Y here to enable support for Intel's dual role port mux
+	  controlled by GPIOs.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 42a66e1..b86d4f9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -205,3 +205,4 @@ intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
+obj-$(CONFIG_MFD_INTEL_VUPORT)	+= intel-vuport.o
diff --git a/drivers/mfd/intel-vuport.c b/drivers/mfd/intel-vuport.c
new file mode 100644
index 0000000..eb27a8f
--- /dev/null
+++ b/drivers/mfd/intel-vuport.c
@@ -0,0 +1,86 @@
+/*
+ * MFD driver for Intel virtual USB port
+ *
+ * Copyright(c) 2016 Intel Corporation.
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+
+/* ACPI GPIO Mappings */
+static const struct acpi_gpio_params id_gpio = { 0, 0, false };
+static const struct acpi_gpio_params vbus_gpio = { 1, 0, false };
+static const struct acpi_gpio_params mux_gpio = { 2, 0, false };
+static const struct acpi_gpio_mapping acpi_usb_gpios[] = {
+	{ "id-gpios", &id_gpio, 1 },
+	{ "gpio-gpios", &vbus_gpio, 1 },
+	{ "usb_mux-gpios", &mux_gpio, 1 },
+	{ },
+};
+
+static struct property_entry reg_properties[] = {
+	PROPERTY_ENTRY_STRING("supply-name", "regulator-usb-gpio"),
+	{ },
+};
+
+static const struct mfd_cell intel_vuport_mfd_cells[] = {
+	{ .name = "extcon-usb-gpio", },
+	{
+		.name = "reg-fixed-voltage",
+		.properties = reg_properties,
+	},
+	{ .name = "intel-mux-gpio", },
+};
+
+static int vuport_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_usb_gpios);
+	if (ret)
+		return ret;
+
+	return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+				intel_vuport_mfd_cells,
+				ARRAY_SIZE(intel_vuport_mfd_cells), NULL, 0,
+				NULL);
+}
+
+static int vuport_remove(struct platform_device *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
+
+	return 0;
+}
+
+static struct acpi_device_id vuport_acpi_match[] = {
+	{ "INT3496" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, vuport_acpi_match);
+
+static struct platform_driver vuport_driver = {
+	.driver = {
+		.name = "intel-vuport",
+		.acpi_match_table = ACPI_PTR(vuport_acpi_match),
+	},
+	.probe = vuport_probe,
+	.remove = vuport_remove,
+};
+
+module_platform_driver(vuport_driver);
+
+MODULE_AUTHOR("Lu Baolu <baolu.lu@linux.intel.com>");
+MODULE_DESCRIPTION("Intel virtual USB port");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

  parent reply	other threads:[~2016-06-02  1:38 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-02  1:37 [PATCH v10 0/7] usb: add support for Intel dual role port mux Lu Baolu
2016-06-02  1:37 ` [PATCH v10 1/7] regulator: fixed: add support for ACPI interface Lu Baolu
2016-06-08  4:42   ` Greg Kroah-Hartman
2016-06-08 13:43     ` Mark Brown
2016-06-08 15:46       ` Greg Kroah-Hartman
2016-06-09  2:43     ` Lu Baolu
2016-06-02  1:37 ` [PATCH v10 2/7] usb: mux: add generic code for dual role port mux Lu Baolu
2016-06-03  7:41   ` Peter Chen
2016-06-03  8:16     ` Heikki Krogerus
2016-06-03  9:20       ` Peter Chen
2016-06-03 16:06     ` Lu Baolu
2016-06-04  2:28       ` Peter Chen
2016-06-05  6:55         ` Lu Baolu
2016-06-05  8:33           ` Jun Li
2016-06-05  8:46             ` Lu Baolu
2016-06-06  1:08               ` Jun Li
2016-06-06  2:30                 ` Lu Baolu
2016-06-06  2:05               ` Peter Chen
2016-06-06  2:45                 ` Lu Baolu
2016-06-06  6:48                   ` Peter Chen
2016-06-06  1:25           ` Peter Chen
2016-06-06  3:04             ` Lu Baolu
2016-06-06  7:02               ` Roger Quadros
2016-06-07  3:03                 ` Jun Li
2016-06-07  6:27                   ` Lu Baolu
2016-06-07  6:34                     ` Jun Li
2016-06-07  9:27                       ` Lu Baolu
2016-06-07 12:49                         ` Roger Quadros
2016-06-07  9:53                   ` Lu Baolu
2016-06-07 12:58                     ` Roger Quadros
2016-06-07 13:04                       ` Felipe Balbi
2016-06-07 14:02                         ` Roger Quadros
2016-06-07 15:05                           ` Felipe Balbi
2016-06-08  3:04                             ` Jun Li
     [not found]                               ` <5757A8CB.90402@linux.intel.com>
2016-06-08  6:20                                 ` Jun Li
2016-06-08  6:25                             ` Peter Chen
2016-06-08  7:58                             ` Roger Quadros
2016-06-06  7:02               ` Peter Chen
2016-06-06  7:35                 ` Lu Baolu
2016-06-02  1:37 ` [PATCH v10 3/7] usb: mux: add driver for Intel gpio controlled " Lu Baolu
2016-06-02  1:37 ` [PATCH v10 4/7] usb: mux: add driver for Intel drcfg " Lu Baolu
2016-06-02  1:37 ` Lu Baolu [this message]
2016-06-02  1:37 ` [PATCH v10 6/7] usb: pci-quirks: add Intel USB drcfg mux device Lu Baolu
2016-06-08  4:45   ` Greg Kroah-Hartman
2016-06-08  7:56     ` Lu Baolu
2016-06-08 15:45       ` Greg Kroah-Hartman
2016-06-09  2:39         ` Lu Baolu
2016-06-16  0:27           ` Lu Baolu
2016-06-18  0:58             ` Greg Kroah-Hartman
2016-06-19  9:52               ` Lu Baolu
2016-06-02  1:37 ` [PATCH v10 7/7] MAINTAINERS: add maintainer entry for Intel USB dual role mux drivers Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464831449-8973-6-git-send-email-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).