From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933654AbcFGW2V (ORCPT ); Tue, 7 Jun 2016 18:28:21 -0400 Received: from mail-pa0-f49.google.com ([209.85.220.49]:36553 "EHLO mail-pa0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933637AbcFGW2R (ORCPT ); Tue, 7 Jun 2016 18:28:17 -0400 From: Jon Mason To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, linux-kernel@vger.kernel.org, Jon Mason Subject: [PATCH 1/2] ARM: dts: NSP: Add XMC board support Date: Tue, 7 Jun 2016 18:28:06 -0400 Message-Id: <1465338487-14932-2-git-send-email-jon.mason@broadcom.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1465338487-14932-1-git-send-email-jon.mason@broadcom.com> References: <1465338487-14932-1-git-send-email-jon.mason@broadcom.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Jon Mason The BCM958525XMC board is a smaller form factor typically used as controller boards for switches. This smaller board has less devices pinned out, so only a few need be populated in the device tree. Signed-off-by: Jon Mason --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm958525xmc.dts | 109 +++++++++++++++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525xmc.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2afa97e..3626be8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -97,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958525xmc.dtb \ bcm958625hr.dtb \ bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts new file mode 100644 index 0000000..d257e83 --- /dev/null +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -0,0 +1,109 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus XMC (BCM958525xmc)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +/* XHCI, SATA, MMC, and Ethernet support needed to be complete */ + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; -- 1.9.1